Intermatic ET100 SERIES Manual del propietario

ET100 SERIES EASY-SET BASIC PROGRAMMING

RESET TIME SWITCH:

1. Place the two position switch to AUTO and the three position

switch to RUN.

2. Press the RESET switch for 3-5 seconds to reset the

microprocessor memory and clear all programmed information. The

display will flash 12:00 AM.

NOTE: Do not press the RESET switch after programming has begun

or you will loose all of your programmed information.

TO SET PRESENT TIME OF DAY:

1. Place the two position switch to AUTO and the three position switch

to TIME SET.

2. Press the HOUR and MIN buttons separately to select the current

time of day. Note that this timer is a 12 hour AM/PM time clock.

TO PROGRAM TIMES :

1. Place the three position switch to PROGRAM. Note that the display

now shows 0:00 1 for Event #1. There are 8 possible programmed

times (events), 4 ON and 4 OFF. All available events need not be

used.

2. Press the HOUR and MIN buttons separately to program the first

ON time desired.

3. Press the EVENT button once. Note that the display now shows

0:00 2 for Event #2.

4. Press the HOUR and MIN buttons for the first OFF time. If more

than 1 ON and 1 OFF time (event) is required per day repeat this

procedure for up to 4 ON and 4 OFF times (events).

5. Return the three position switch to the RUN position and make sure

the two position selector switch is in the AUTO position.

TO REVIEW PROGRAMMED TIMES:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button to review each of the 8 set points.

TO CHANGE PROGRAMMED TIMES:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button until the desired time to change is

displayed.

3. Press the HOUR and MIN buttons separately to change the

displayed time to the new time desired.

4. Press the EVENT button to proceed to the next programmed event

to change if desired and follow previous procedure. If not return the

three position switch to the RUN position.

TO DELETE A PROGRAMMED TIME:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button until the desired time to delete is

displayed.

3. Press the ON/OFF button twice to delete that time. The display will

now show 0:00 and the event number.

4. Return the three position switch to RUN.

TO OVERRIDE PROGRAM:

Program can be overridden at any time by placing the two position

switch to MANUAL. Programmed set times will be maintained but will

not operate the controlled load automatically.

TO MANUALLY OPERATE LOAD:

1. Place the two position switch to either MANUAL or AUTO.

2. Place the three position switch to RUN and depress the ON/OFF

button.

NOTE: The display will show your load toggle ON or OFF.

TO OPERATE TIMER:

Place the two position switch to AUTO and the three position switch to

RUN.

NOTE: When finished programming you may have to toggle your load

ON or OFF depending on the state it should be in at that time by

depressing the ON/OFF button.

NOTE: For assistance please contact Intermatic Technical Services at

815-675-7000.

Tabla de contenidos

Otros manuales de Cambiar de Intermatic

Intermatic

Intermatic T171 Manual

Intermatic

Intermatic HB12R Manual

Intermatic

Intermatic T172CR Manual

Intermatic

Intermatic DT101 Manual de usuario

Intermatic

Intermatic T1871BR Manual

Intermatic

Intermatic T103 Manual

Intermatic

Intermatic ET716CK Manual de usuario

Intermatic

Intermatic T1975 Manual

Intermatic

Intermatic WH21 Manual de usuario

Intermatic

Intermatic T8845PV Manual

Intermatic

Intermatic TSM1 Series Manual de usuario

Intermatic

Intermatic CA600 Manual de usuario

Intermatic

Intermatic ET70415CR Manual de usuario

Intermatic

Intermatic T7801BC Manual

Intermatic

Intermatic T1475BR Manual

Intermatic

Intermatic T104-20 Manual

Intermatic

Intermatic T1976 Manual

Intermatic

Intermatic T173CR Manual

Intermatic

Intermatic ET1100 Series Guía

Intermatic

Intermatic GM40AVE-RD89 Series Manual de usuario

Intermatic

Intermatic ET2805C Manual

Intermatic

Intermatic T7402B Manual

Intermatic

Intermatic IOS-DSIMF Manual de usuario

Intermatic

Intermatic GRASSLIN FM1D14 Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario