Interlogix TruVision DVR 42 Manual de usuario

TruVision DVR 42 Quick Start

Guide

P/N 1072663C-EN • REV 1.0 • ISS 14AUG14

Interlogix is part of UTC Building & Industrial Systems, a unit of United

Trademarks and

patents

Trade names used in this document may be trademarks or registered

trademarks of the manufacturers or vendors of the respective products.

Contact

information

www.interlogix.com or www.utcfssecurityproducts.eu

TVR 42 Quick Start Guide 1 : EN

TruVision DVR 42 Quick Start

Guide

Figure 1: Back panel connections

1. Connect up to 16 analog cameras (depends on

the DVR model).

2. Connect up to 16 audio inputs to RCA

connectors.

3. Connect up to two CCTV monitors: Spot and

main monitors

4. Connect to speakers for audio output.

5. Connect RCA connector to a microphone.

6. Connect to a RS-232 device.

7. Connect one CCTV monitor (BNC-type

connector).

8. Connect to an optional eSATA device such as

SATA HDD, CD/DVD-RM.

9. Connect to a HDTV. The HDMI connection

supports both digital audio and video.

10. Connect to an optional USB device such as a

mouse, CD/DVD burner or HDD. The DVR

supports both a USB DVD and a USB HD on the

front and back USB ports.

11. Connect to a network.

12. Terminate the line to the dome cameras using

this RS-485 switch. Default is Off.

13. Connect to a PTZ control.

14. Connect to a keyboard (KTD-405 shown)

15. Connect up to 16 alarm inputs.

16. Connect up to four alarm relay outputs.

17. Connect to ground.

18. Connect to a power supply.

19. Loop through for up to 16 analog cameras.

EN : 2 TVR 42 Quick Start Guide

Figure 2: Front panel controls

1. USB port.

2. Press to eject CD/DVD disc.

3. Press to enter quick archive mode. Press twice

to start archiving.

4. Insert CD or DVD disc.

5. Press Display to select the viewing mode

(multiview or full screen), A / Bto select the

monitor, Seq to start/stop sequencing.

6. IR receiver.

7. Press to switch between different cameras in

live view, PTZ control, or playback modes.

8. Status LEDs. Indicates the status of the HDD,

network, and Watchdog, as well as whether

there is an external alarm.

9. Press to manually acknowledge an alarm.

10. Alarm indicator bar blinks when there is an alarm.

11. Move the joystick to select options in menus and

to control playback. Press for Enter. The LED

arrows are lit when the jog is active.

12. Press to control digital zoom and to select

presets and shadow tours.

13. Press to control playback, replay current

playback file, and to return to live view mode.

14. Press to enter the main menu and advanced

search modes.

Figure 3: Quick access toolbar

1. Freeze: Freeze live image of the selected

camera.

2. Manual recording: Start/stop manual

recording.

3. Instant playback: Play back the recorded video

from the last five minutes.

4. Audio: Enable/disable audio output.

5. Quick snapshot: Capture a snapshot of a video

image.

6. PTZ control: Enter PTZ control mode.

7. Digital zoom: Enter digital zoom.

8. Image settings: Modify the image lighting levels.

9. Text show: Display inserted text on screen.

10. Close: Close the toolbar.

TVR 42 Quick Start Guide 3 : EN

Package contents

The TruVision DVR 42 (model TVR 42) is

shipped with the following items:

• IR (infrared) remote control

• Two AAA batteries for the remote

control

• AC power cords (US, Europe, UK)

• USB mouse

• TVR 42

• Video loop through cable

• CD with software and manuals

• TruVision DVR 42 Quick Start Guide

• TruVision DVR 42 User Manual

(on CD)

• TruVision Recorder Operator Guide (on

CD)

Installation environment

Refer to the user manual for detailed

information, but observe these important

requirements:

• Place the unit in a secure location.

• Ensure that the unit is in a well-

ventilated area.

• Do not expose the unit to rain or

moisture.

Quick install

Recommended steps for setting up the

DVR:

1. Connect all the devices required to

the back panel of the TVR 42. See

Figure 1 on page 1.

Basic connections:

Connect the cameras to the BNC

camera inputs and monitor A to the

BNC, VGA or HDMI output. Connect

the mouse to the USB port in the front

panel.

Optional connections:

All the other connections shown are

optional and depend upon installation

requirements.

2. Connect the power cord to the unit

and turn on the power.

3. Set up the unit with the required

settings using the setup Wizard.

First-time use

The TVR 42 has an express installation

wizard that lets you easily configure

basic DVR settings when first used. It

configures all cameras simultaneously.

The configuration can then be

customized as required.

By default, the setup wizard will start

once the DVR has loaded. The wizard

walks you through some of the more

important settings of your DVR. Select

the preferred language for the system

and then enter the administrator

password. The default admin password

is 1234. It is strongly recommended that

this password is changed.

The wizard will then guide you through

the menus to set the time and date,

network configuration, HDD

management, and recording

configuration.

When all the required changes have

been entered, click Finish to exit the

wizard. The TVR 42 is now ready to use.

Recording starts automatically.

Operating the TVR 42

There are several ways to control the

unit:

• Front panel

• IR remote control

• Mouse

• Web browser

Front panel

The buttons on the front panel control

most functions. See Figure 2 on page 2

for the locations of the controls.

EN : 4 TVR 42 Quick Start Guide

IR remote control

The IR remote control buttons are similar

to those on the front panel. Place the two

AAA batteries in the remote control.

To connect the remote control to the

DVR:

1. Press Menu on the front panel or

right-click the mouse and select

Menu. The main menu screen

appears.

2. Select Display Mode Settings >

Monitor.

3. Check and remember DVR device

address value. The default value is

255. The device address is valid for

all IR controls.

4. On the remote control press the

Device button.

5. Enter the device address value. It

must be the same as that on the TVR

42.

6. Press ENTER on the remote control.

USB mouse

The USB mouse provided with the

TVR 42 operates all the functions of the

DVR, unlike the front panel, which has

limited functionality. The mouse lets you

navigate and make changes to settings

in the user interface.

Connect the mouse to the DVR by

plugging the mouse USB connector into

the USB port on the front panel. The

mouse is immediately operational and

the pointer should appear.

Web browser control

The TVR 42 Web browser lets you view,

record, and play back videos as well as

manage all aspects of the DVR from any

PC with Internet access. The browser’s

easy-to-use controls give you quick

access to all DVR functions.

To access the unit, open a web browser

and enter the IP address assigned to the

DVR as a web address. In the log on

screen, enter the default user ID and

password:

• User ID: admin

• Password: 1234

The default values for TVR 42 network

settings are:

• DHCP: Disabled by default.

• IP address - 192.168.1.82

• Subnet mask - 255.255.255.0

• Gateway address - 192.168.1.1

• Ports:

When using the browser:

RTSP port: 554

HTTP port: 80

When using TruNav:

RTSP port: 554

Server/Client software port : 8000

Figure 4: Web browser interface

Live view mode

Live mode is the normal operating mode

of the unit where you watch live pictures

from the cameras.

Regularly used functions in live view can

be quickly accessed by clicking the left-

button of the mouse on the camera

image. The shortcut pop-up toolbar

TVR 42 Quick Start Guide 5 : EN

appears. See Figure 3 on page 2 for a

description of the functions available.

Configuring the TVR 42

The TVR 42 has an icon-driven menu

structure that allows you to configure the

unit’s parameters. Each command icon

displays a screen that lets you edit a

group of settings. Most menus are

available only to system administrators.

Refer to the TVR 42 user manual for

detailed information on configuring the

unit.

To access the main menu from live

view:

Press the Menu button on the remote

control or front panel

- Or -

Right-click the mouse and select

Menu from the pop-up menu.

The main menu screen appears. Move

the mouse over a command icon in the

menu toolbar and click to select it.

Description of the command icons in

the menu toolbar:

Configures display settings.

Configures camera settings.

Configures recording settings.

Configures standard network

settings.

Configures alarm settings.

Configures PTZ settings.

Configures user settings.

Configures system settings.

Provides reference information

to the various toolbars and

menus within the interface.

Provides access to logout,

reboot and shutdown options.

Specifications

Power supply 100 to 240 VAC,

6.3 A, 50 to 60 Hz

Power consumption

(without HDD or

DVD-R/W):

TVR 4204

TVR 4208

TVR 4216

≤35 W

≤40 W

≤45 W

Operating

temperature

-10 to +55 ºC

(14 to 131 °F)

Relative humidity 10 to 90%

Dimensions

(W x H x D)

445 × 470 × 90 mm

(17.5 × 18.5 × 3.5 in.)

Weight ≤8 kg (≤17.6 lb.)

(without HDD or DVD-

R/W)

Contact information

For contact information, see

www.interlogix.com, or

www.utcfssecurityproducts.eu

Otros manuales para TruVision DVR 42

Tabla de contenidos

Otros manuales de DVR de Interlogix

Interlogix

Interlogix TruVision NVR 21 Manual de usuario

Interlogix

Interlogix TruVision NVR 21 Manual de usuario

Interlogix

Interlogix TVR 45HD Manual de usuario

Interlogix

Interlogix truVision DVR 31 Manual de usuario

Interlogix

Interlogix TVR 15HD Manual de usuario

Interlogix

Interlogix TruVision DVR 12HD Manual de usuario

Interlogix

Interlogix TruVision DVR 42 Manual de usuario

Interlogix

Interlogix TruVision DVR 60 Manual de usuario

Interlogix

Interlogix TruVision DVR 15HD Manual de usuario

Interlogix

Interlogix TruVision NVR 70 Manual de usuario

Interlogix

Interlogix TruVision DVR 12 Manual de usuario

Interlogix

Interlogix TruVision TVR-1116D-2T Manual de usuario

Interlogix

Interlogix TruVision TVN 21 Manual de usuario

Interlogix

Interlogix TruVision DVR 12HD Manual de usuario

Interlogix

Interlogix TVR 60 series Manual de usuario

Interlogix

Interlogix TruVision DVR 30 Manual de usuario

Interlogix

Interlogix TVR 12 Manual de usuario

Interlogix

Interlogix TruVision NVR 22 Manual de usuario

Interlogix

Interlogix MobileView 3000 Manual de usuario

Interlogix

Interlogix TVR 11 Manual de usuario

Interlogix

Interlogix TruVision DVR 42 Manual de usuario

Interlogix

Interlogix TruVision DVR 44HD Guía

Interlogix

Interlogix TVR 11c Manual de usuario

Interlogix

Interlogix TruVision TVR 1516DHD Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario