Interacoustics Sera Manual de usuario

D-0118113-C –2019/03 Page 1of 2

Quick Guide

SeraTM Automated ABR

PREPARE THE EQUIPMENT

1. Turn on SeraTM by pressing the home/power button

2. Select a new or existing patient on the device or use the Quick Test option.

3. Select the ABR test protocol from the list.

4. Select the ear for testing

5. Pressing the Test button starts the test.

TEST ENVIRONMENT

The ideal test environment is a quiet room where lights and other electronic equipment are turned off.

PREPARE THE BABY

Patient state

The baby should be sleeping or in a quiet and relaxed state.

Sucking, blinking, crying or movement may affect testing.

Skin preparation

If the baby’s skin is oily or covered in vernix, the electrode placement sites

should be cleaned prior to placing the electrodes.

Use a conductive gel with the electrodes to improve impedances.

Place electrodes

Place surface electrodes using the specified test montage for the selected

protocol (mastoid or nape).

Connect cables

Connect the cables from the preamplifier to the respective surface electrodes.

PLACE TRANSDUCER

Place the probe or insert earphones in the baby’s ear/s or place the EarCups around the baby’s ears.

To reduce the chance of

electrical interference, ensure

that the electrode cables are

placed away from the insert

earphone or EarCup transducer

box.

D-0118113-C –2019/03 Page 2of 2

RUN TEST

Press the Test button

IMPEDANCE CHECK

RESULTS

PASS result

REFER result

INCOMPLETE result

When the pass criteria for the test

is reached, a is displayed in

green above the measurement,

indicating the test has PASSED.

When the pass criteria for the test

is not reached within the

measurement time, is displayed

in amber above the measurement,

indicating the test is a REFER.

If the test is stopped before a

PASS or REFER is generated by

the system, is displayed above

the measurement indicating that

the test is INCOMPLETE.

An impedance check will begin. Impedances are indicated by the green/amber dots on the montage picture

as well as in numerical format on the screen.

When a dot is amber, it means the impedance is poor (> 50kΩ) for the

indicated electrode. Check that the surface electrode and cables are

connected correctly. It may be necessary to re-clean the skin or use a

conductive gel with the surface electrodes to achieve an acceptable

impedance. Testing cannot begin until impedance indictors are green

(< 50kΩ).

Otros manuales para Sera

Otros manuales de Equipo médico de Interacoustics

Interacoustics

Interacoustics Sera Manual de instalación

Interacoustics

Interacoustics OtoRead Manual de usuario

Interacoustics

Interacoustics Aqua Stim Manual de usuario

Interacoustics

Interacoustics Affinity2.0 Manual de usuario

Interacoustics

Interacoustics VisualEyes 515 Manual de usuario

Interacoustics

Interacoustics Lyra Manual de usuario

Interacoustics

Interacoustics EyeSeeCam Manual de usuario

Interacoustics

Interacoustics Air Fx Manual de usuario

Interacoustics

Interacoustics Titan Manual de usuario

Interacoustics

Interacoustics VRA Screen Manual de usuario

Interacoustics

Interacoustics AS608 Manual de usuario

Interacoustics

Interacoustics AT235 Manual de usuario

Interacoustics

Interacoustics VisualEyes 505 Manual de usuario

Interacoustics

Interacoustics Eclipse Manual de usuario

Interacoustics

Interacoustics VRA Screen Manual de usuario

Interacoustics

Interacoustics affinity 2.0 Manual de instalación

Interacoustics

Interacoustics OtoRead Manual de usuario

Interacoustics

Interacoustics VisualEyes 515 Manual de instalación

Interacoustics

Interacoustics affinity 2.0 Manual de usuario

Interacoustics

Interacoustics Nydiag 200 Manual de usuario

Interacoustics

Interacoustics VisualEyes 515 Manual de usuario

Interacoustics

Interacoustics Titan ABRIS Manual de usuario

Interacoustics

Interacoustics Micromedical Orion Manual de usuario

Interacoustics

Interacoustics EyeSeeCam Manual de usuario

Manuales populares de Equipo médico de otras marcas

TekTone

TekTone Tek-CARE160 Manual de usuario

NeuroMetrix

NeuroMetrix Quell 2.0 Manual de usuario

AMT

AMT XLR8 Manual de usuario

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Manual de usuario

EDAN

EDAN SONOTRAX Pro Manual de usuario

Restorative Therapies

Restorative Therapies RT300 Manual de usuario

Gendex

Gendex Expert DC Manual de usuario

Dexcowin

Dexcowin ADX4000W Manual de usuario

Libelium

Libelium MySignals Manual de usuario

Acelity

Acelity V.A.C.ULTA 4 Manual de usuario

Caputron

Caputron ActivaDose II tDCS Manual de usuario

FujiFilm

FujiFilm Sonart Manual del propietario

Plinth 2000

Plinth 2000 93CDT Manual de usuario

GE SENOGRAPHE 800T Manual de usuario

GE Definium 5000 Manual de usuario

Kanmed

Kanmed GE-1380 Manual de usuario

Huntleigh

Huntleigh FD1 Manual de usuario

Stryker

Stryker SPR Plus Manual de usuario