IntelliTech IMS-80X80 Manual de usuario
2
Large Modular Matrix Switcher with WEB GUI, APP Control
Model –IMS-80X80 CUSTOMIZABLE
Datasheet and Manual
3
Safety Reminder
To protect the device and operating personnel from electrostatic discharge, you need to check and
ensure that the device is grounding well before the device is powered on. Please observe the
following when you install, use, maintain this equipment.
Make sure the device ground connection.
Disposal Instruction (US)
For better protection of our earth, please don't throw this electronic device into municipal trash bin when
discarding.
To minimize pollution and ensure utmost protection of the global environment, please recycle the product. For
more
information about the collection and recycling of Waste Electrical and Electronic Equipment (WEEE), please
contact your local dealers.
Safety Instructions
1. Please read these safety instructions carefully.
2. Please keep this User Manual for later reference.
3. Please disconnect this equipment from connecter before cleaning. Don’t use liquid or prayed detergent for
cleaning. Use moisture sheet or cloth for cleaning.
4. Make sure the equipment is connected to the power source with the correct voltage, frequency, and ampere.
5. All cautions and warnings on the equipment should be noted.
6. Never pour any liquid into opening, this could cause fire or electrical shock.
7. Never open the equipment. For safety reason, the equipment should only be opened by qualified service
personnel.
8. If one of the following situations arises, get the equipment checked by a service personnel :
a. Liquid has penetrated into the equipment.
b. The equipment has been exposed to moisture.
c. The equipment has not work well or you can not get it work according to user’s manual.
d. The equipment has dropped and damaged.
e. If the equipment has obvious sign of breakage.
9. Ambient operation temperature: 0 ~ 45 degrees.
10. Risk of overheating! Don ’ t put operating/installing equipment inside too closed space, be sure the
installation space at least 1 to 2 inches or 2 to 5 cm of space for ventilation. To ensure that other objects do not
cover the equipment.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, player, etc.) certified to comply with Class B limits may be
attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and
TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is
granted by the Federal Communications Commission, to operate this equipment.
4
Contents
1.
Product Introduction....................................................................................................................4
2.
Product Features ..........................................................................................................................4
3.
Technical Datasheet .....................................................................................................................5
4.
Packing Datials..............................................................................................................................5
5.
Panel diagram...............................................................................................................................5
6.
Product Connection Diagram.......................................................................................................7
7.
Product Operation and Instruction..............................................................................................7
7.1 Front Panel Switching Operation ..............................................................................7
7.1.1 Switch............................................................................................................7
7.1.2 Scene.............................................................................................................7
7.1.3 Set Up............................................................................................................8
7.1.4 View ..............................................................................................................8
7.2 WEB Control.............................................................................................................8
7.2.1 Login..............................................................................................................8
7.2.2 Switch............................................................................................................8
7.2.3 Scene.............................................................................................................9
7.2.4 Rename .......................................................................................................10
7.2.5 Manager Control..........................................................................................10
7.2.6 SetUp...........................................................................................................17
7.2.7 Upgrade.......................................................................................................17
7.3 APP Control..............................................................................................................8
7.4 Control Commands ................................................................................................20
8.
Trouble Shooting and Attention ................................................................................................18
5
1. Product Introduction
IMS- 80X80 customizable is a modular matrix switcher, with 80 input slots and 80 output
slots, so it can support maximum 80 inputs and 80 outputs, all the input and output cards
are using 1-card 4-port, the signals are including the DVI, HDMI, HDBasT, Fiber Optic,
3G/HD-SDI,. Users are able tohave mixed signals inputs and mixed signals outputs.
The single channel signal switching speed can reach 18Gbps, and the main board is using
Four core four links processing technology, the switching ability speed can reach 32Gbps.
With uncompressed transmission technology for the digital signal to make sure the image
High fidelity output. Unique signal links shielding designing technology to make sure the
signal completeness, the internal data switch has super strong capacity of resisting
disturbance and long continuous and stable working ability. Supports 7*24 continuously
working and with dual LAN and RS232 backup control, it’s convenient for users to control
via PC, iPad, APP and the 3rd parties central control by the the RS232 control commands.
With the dual RS232 and LAN control, users also can simply set up and control the
surrounding equipment, such as the projector, electric curtain and TVs.
2. Product Features
Modular designing chassis, with 80 input slots and 80 output slots
1-card 4-port input and output card
Supports 1080P, 4K30 and 4K60 cards for selections
Supports DVI-I/ HDMI/ 3G/HD-SDI/ HDBaseT/ Fiber to mix input and output
EDID Management
Support Video wall and seamless switching with the 1080P and 4K60 cards
Support 3.5mm audio embedded and de-embedd function
Support up/down scaling function via the DIP switch
Support dual LAN and RS232 ports for backup control
Front buttons with background lights, easier to operate at any time
Support auto saving protection and auto recovery function while power cut
Front USB option to control only (optional)
3. Technical Data
Model
80x80 Card Cage
Description
80x80 Modular Matrix System Chassis
Input
1-card 4-port input, including DVI/HDMI/VGA/CVBS/YPbPr/SDI/ HDBaseT/Fiber
Output
1-card 4-port output, including DVI/HDMI/VGA/CVBS/YPbPr/SDI/ HDBaseT/Fiber
Protocol Standard
Support HDMI1.4, HDMI2.0, DVI1.0. HDCP1.4, HDP2.2
Color Space
Support RGB444, YUV444, YUV422 , x.v.C standard color extension
Resolution
640×480---3840×2160@60Hz(VESA ), 480i---4K@60Hz(HDTV )
Distance
HDMI/DVI: 15m/40ft ; HDBaseT: 70m/220ft; Fiber: 2km/6000ft
6
Control
iOS/Android Apps, WEB GUI, RS232 & 10" Color Touchscreen
Chroma sampling
4:4:4
Power
AC: 110V—260V 50/60Hz
Consumption
180W(No Cards)
Dimension
16U, 482*390*726(mm)/ 18.97*15.35*28.58(inch)
Weight
28kg/61.7294lbs (No Cards)
Work Temperature
0℃~50℃
Storage Temperature
-20℃~55℃
4. Packing Details
Matrix switch chassis with customized configuration.......................................... 1 unit
Power cord ...........................................................................................................2 pcs
User manual ......................................................................................................... 1 pcs
5. Panels (Here take example with 10x10)
5.1
Back Panel
7
A: Back rack ear
B: 3.5mm Audio input
C: Status indicator: Power on will light up
D: DVI-I interface input, support DVI/ HDMI/ CVBS/ Ypbpr/ VGA input with adapters
E: Input area, maximum can support 80/ 160inputs, signals can be DVI/ HDMI/
CVBS/ Ypbpr/ VGA/ Fiber Optic
F: Plug helper
G: Input and output indicates flap, left side is 1-80 inputs, right side is 1-80outputs
H: 3.5mm Audio output
J: DVI-I interface output, support DVI/ HDMI/ CVBS/ Ypbpr/ VGA input with adapters
K: Output area, maximum can support 80/ 160 inputs, signals can be DVI/ HDMI/
CVBS/ Ypbpr/ VGA/ Fiber Optic
L & N: Dual RS232 ports
M & O: Dual LAN ports
P: ON/ OFF power switcher
Q: Redundant power system, 100-240V 50/60Hz
6. Connection Diagram
8
7. Operation
7.1
Touch Screen
After power on, it shows below interface:
Switch Icon:
After click switch icon, it shows below interface:
9
Eg. Switch input 10 to output 20/30/40.
Press number 10 from input buttons, and color turns to blue. Then same way to press number
20/30/40 on the output buttons area, shows as above picture.
SCENE Icon:
Total can save 24 scenes, after press SCENCE it will show below interface:
Save scene: After pressed scene icon, users can see above interface. Then users can choose any
number buttons from the above 24, and then press Save. Such as, users want to save
the current switching status to scene 1, users only need to press number 1 and then
choose Save.(Note: This function only can be used under unlock status)
10
Recall scene: After the scenes saved successfully, user also can choose the scene name to recall
the previous/saved switching status. Such as users want to recall scene 6, only need
to press number 6 and then press load.
Users also can preview the scene switching status by both side windows next to the numbers.
SETUP Icon:
Users can change the name of Scene, input and output here. After changing the default settings,
users need to press Save to save the changes.
Change the name of scenes, only need to press Scene icon at the left bottom, showing as below:
Then change to the needed names:
Users also can change all the 24 scenes name together or one by one and then to press the save
button, as below:
