Intellisystem IT-VCHD6000 Manual de usuario
1
IT-VCHD6000
HD Video Conferencing Camera
User Manual
V2.2
(English)
2
Preface
Thanks for using this HD Video Conferencing Camera.
This manual introduces the function, installation and operation of the HD camera. Prior to installation
and usage, please read the manual thoroughly.
Precautions
This product can only be used in the specified conditions in order to avoid any damage to the camera:
Do not subject the camera to rain or moisture.
Do not remove the cover. Otherwise, you may get an electric shock. In case of abnormal
operation, contact the authorized engineer.
Never operating under unspecified temperature, humidity and power supply.
Please use the soft dry cloth to clean the camera. If the camera is very dirty, clean it with
diluted neuter detergent; do not use any type of solvents, which may damages the surface.
Note:
This is class A production. Electromagnetic radiation at the specific frequency may affect the image
quality of TV in home environment.
Copyright Notice
All contents of this manual cannot be cloned, copied or translated without the permission of the
company. Product specifications and information which were referred to in this document are for
reference only, and the content will be updated at any time without prior notice.
3
Contents
Note ......................................................................................................................................................... 4
Supplied Accessories ............................................................................................................................... 4
Quick Start............................................................................................................................................... 5
Features ................................................................................................................................................... 7
Product Specification............................................................................................................................... 8
Main Unit .............................................................................................................................................. 10
Size........................................................................................................................................................ 12
IR Remote Controller Explanation......................................................................................................... 13
RS-232 Interface.................................................................................................................................... 15
VISCA Network Configuration ............................................................................................................. 17
Serial Communication Control .............................................................................................................. 18
Command List ....................................................................................................................................... 19
Menu Setting ......................................................................................................................................... 20
Network Function .................................................................................................................................. 26
Maintenance and Troubleshooting ......................................................................................................... 36
4
Note
Electric Safety
Installation and operation must accord with electric safety standard.
Caution to transport
Avoid stress, vibration and soakage in transport, storage and installation.
Polarity of power supply
The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power
supply plug drawing as follows.
Careful of installation
Do not grasp the camera head when carrying the camera. Don’t turn camera head by hand. Doing
so may result in mechanical damage.
Don’t apply in corrosive liquid, gas or solid environment to avoid damaging the cover which is
made up of plastic material.
To make sure no obstacle in rotation range.
Never power on before installation is not completed.
Don’t dismantle the camera
We are not responsible for any unauthorized modification or dismantling.
CAUTION!
The specific frequency of electromagnetic field may affect the image of the camera!
Supplied Accessories
When you unpack, check that all the supplied accessories are included:
Camera .....................................................................................1PCS
AC power adaptor .....................................................................1PCS
5
Power cord..................................................................................1PCS
RS232 cable................................................................................1PCS
Remote controller .......................................................................1PCS
User manual................................................................................1PCS
Quick Start
Step1. Please check connections are correct before starting
Step2. Setting of the bottom switches
Set of both the switch1 and switch2 to ‘OFF’. That is ‘Normal Working Mode’.
SW-1
SW-2
Modes
1
OFF
OFF
Normal Working Mode
2
ON
OFF
-
3
OFF
ON
-
4
ON
ON
-
6
Step3. Setting of the system select switch
The option of video format:
VIDEO SYSTEM
0
1080p60
8
720p30
1
1080p50
9
720p25
2
1080i60
A
-
3
1080i50
B
-
4
720p60
C
-
5
720p50
D
-
6
1080p30
E
-
7
1080p25
F
-
CAUTION:
a. After changing the switch, you need to restart the camera to take effect.
b.720 p30 and 720 p25 only under the HDMI output.
Step4. Press the Switch ON/OFF button on the rear of the camera, the power lamp light.
Step5. Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to
the center, the process of initialization is finished. (Note: If the position preset 0 has been stored, the
position preset 0 will be called up after initialization)
7
Features
H.265 Support
The first H.265 encoding support conference video camera in the world, enabling full HD 1080p/60
video stream by ultra-low bandwidth.
1080P Full HD
Apply Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS sensor, can reach
maximum 1920 x 1080 high resolution and achieve quality image.
Ultra-high Frame Rate
The output frame rate up to 60fps in 1080P, up to 120fps output in 720P (supported by network only),
640x480P can be as high as 240fps (supported by network only, optional).
Face Detection
Built-in face detection module, enabling PTZ tracking (optional).
AAC Audio Encoding
Support AAC audio encoding, better sound quality and smaller bandwidth.
Local Storage
Support local storage module, directly recording to local USB flash disk without NVR.
Low-light
High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithm, effectively reduce
the noise, even under low illumination conditions, picture can still keep clean and clear.
Abundant & Perfect interface
Support HDMI output, 3G-SDI interface, effective transmission distance up to 100 meters.
20x Optical + 32x Digital Zoom
Use TAMRON high quality super telephoto lens, support 20x optical zoom, and 32x digital zoom.
Remote Control
Using RS232/485 interface, all the parameters of the camera can be remote controlled by the
high-speed communications.
Freeze During Preset
Support "Freeze during Preset" function, can masked image when calling the preset.
8
Product Specification
Model
IT-VCHD6000
Name
HD Video Conferencing Camera
Camera
Video System
HD: 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25,
720p/60, 720p/50,720p30,720p25, 720p/120 ((supported by S
Model only), 640x480p/240 (supported by S Model only, optional)
Sensor
1/2.7'', CMOS, Effective Pixel: 2.07M
Scanning Mode
Progressive
Lens
20x, f4.42mm ~ 88.5mm, F1.8 ~ F2.8
Digital Zoom
16x (optional)
Minimal Illumination
0.05 Lux @ (F1.8, AGC ON)
Shutter
1/30s ~ 1/10000s
White Balance
Auto,
3000K/Indoor,4000K,5000K/Outdoor,6500K-1,6500K-2,6500K-3,
One Push, Manual
Backlight Compensation
Support
Digital Noise Reduction
2D&3D Digital Noise Reduction
Video S/N
≥55dB
Horizontal Angle of View
60.7° ~ 3.36°
Vertical Angle of View
34.1° ~ 1.89°
Horizontal Rotation
Range
±170°
Vertical Rotation Range
-30° ~ +90°
Pan Speed Range
1.7° ~ 100°/s
Tilt Speed Range
1.7° ~ 69.9°/s
H & V flip
Support
9
Image Freeze
Support
Face Detection
Support (optional)
Local Storage
Support
Number of Preset
255
Preset Accuracy
0.1°
IPC Features
Video coding standard
H.265/H.264/MJEPG
Video Stream
First stream, Second stream
First stream resolution
1920x1080,1280x720,1024x576,960x540,640x480,640x360
Second stream resolution
1280x720,1024x576,720x576,720x408,640x360,480x270,320x240,
320x180
Video Bit Rate
32Kbps ~ 20480Kbps
Bit Rate Type
Variable rate, Fixed rate
Frame Rate
50Hz: 1fps ~ 50fps, 60Hz: 1fps ~ 60fps, 720p120: 120fps
(supported by S Model only), 640x480p240: 240fps(supported by S
Model only, optional)
Audio encode standard
AAC
Audio stream rate
96Kbps, 128Kbps, 256Kbps
Support protocols
TCP/IP, HTTP, RTSP, RTMP, Onvif, DHCP, Multicast, etc.
Input/Output Interface
HD Output
1xHDMI: Version 1.3
1x3D-SDI: BNC type, 800mVp-p, 75Ω, Along to SMPTE 424M
standard
Network interface
1xRJ45: 10/100/1000M Adaptive Ethernet ports
Audio Interface
1-ch 3.5mm audio interface, Line In
USB
1xUSB2.0: Type A female jack
Communication interface
1xRS-232 IN: 8pin Min DIN, Max Distance: 30m, Protocol:
10
VISCA/Pelco-D/Pelco-P
1xRS-232 OUT: 8pin Min DIN, Max Distance: 30m, Protocol:
VISCA network use only
1xRS-485: 2pin Phoenix port, Max Distance: 1200m, Protocol:
VISCA/Pelco-D/Pelco-P
Power jack
JEITA type (DC IN 12V)
Generic Specification
Input Voltage
DC 12V
Current Consumption
1.0A (Max)
Operating Temperature
-10°C ~ 40°C (14°F ~ 104°F)
Storage Temperature
-40°C ~ 60°C (-40°F ~ 140°F)
Power Consumption
12W (Max)
MTBF
>30000h
Size
240mm x 144mm x 160mm
Net Weight
1.65Kg (3.6lb)
Main Unit
1. Lens 11. RJ45 interface
2. Sensor for the Remote Commander 12. Line in interface
3. Power lamp 13. RS485 interface
4. Standby lamp 14. HD-SDI interface
Tabla de contenidos
Otros manuales de Cámara IP de Intellisystem
