Intel SR9000MK4U - Server System - 0 MB RAM Manual de usuario

Intel®Server System

SR9000MK4U Product Guide

Intel Order Number D71314-004

ii Intel®Server System SR9000MK4U Product Guide

Disclaimer

Information in this document is provided in connection with Intel® products. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's

Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any

express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to

fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property

right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining

applications or for any other application in which the failure of the Intel product could create a situation where

personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,

without notice.

Intel server boards contain a number of high-density VLSI and power delivery components that need adequate

airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these

components when the fully integrated system is used together. It is the responsibility of the system integrator that

chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to

determine the amount of airflow required for their specific application and environmental conditions. Intel Corporation

can not be held responsible if components fail or the server board does not operate correctly when used outside any

of their published operating or non-operating limits.

Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in

the United States and other countries.

* Other names and brands may be claimed as the property of others.

iii

Safety Information

Important Safety Instructions

Read all caution and safety statements in this document before performing any of the

instructions. See also Intel Server Boards and Server Chassis Safety Information on the

Resource CD and/or at http://support.intel.com/support/motherboards/server/sb/cs-

010770.htm.

Wichtige Sicherheitshinweise

Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor

Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu

Intel-Serverplatinen und Servergehäusen auf der Resource CD oder unter http://

support.intel.com/support/motherboards/server/sb/cs-010770.htm.

Consignes de sécurité

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce

document avant de suivre toute instruction. Consultez Intel Server Boards and Server

Chassis Safety Information sur le Resource CD ou bien rendez-vous sur le site http://

support.intel.com/support/motherboards/server/sb/cs-010770.htm.

Instrucciones de seguridad importantes

Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar

cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety

Information en el Resource CD y/o en http://support.intel.com/support/motherboards/

server/sb/cs-010770.htm.

iv Intel®Server System SR9000MK4U Product Guide

Warnings

Heed safety instructions: Before working with your server product, whether you are

using this guide or any other resource as a reference, pay close attention to the safety

instructions. You must adhere to the assembly instructions in this guide to ensure and

maintain compliance with existing product certifications and approvals. Use only the

described, regulated components specified in this guide. Use of other products /

components will void the UL listing and other regulatory approvals of the product and

will most likely result in noncompliance with product regulations in the region(s) in which

the product is sold.

System power on/off: The power button DOES NOT turn off the system AC power. To

remove power from system, you must unplug the AC power cord from the wall outlet.

Make sure the AC power cord is unplugged before you open the chassis, add, or remove

any components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the server and

disconnect the power cord, telecommunications systems, networks, and modems attached

to the server before opening it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,

boards, and other parts. We recommend that you perform all procedures in this chapter

only at an ESD workstation. If one is not available, provide some ESD protection by

wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on

your server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely

sensitive to ESD. Hold boards only by their edges. After removing a board from its

protective wrapper or from the server, place the board component side up on a grounded,

static free surface. Use a conductive foam pad if available but not the board wrapper. Do

not slide board over any surface.

重要安全指导

Intel®Server System SR9000MK4U Product Guide v

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that you can grip with your

fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab,

take care when using needle nosed pliers to remove or install a jumper; grip the narrow

sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can

damage the contacts inside the jumper, causing intermittent problems with the function

controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool

you use to remove a jumper, or you may bend or break the pins on the board.

vi Intel®Server System SR9000MK4U Product Guide

vii

Preface

About this Manual

Thank you for purchasing and using Intel®server products.

This manual is written for system technicians who are responsible for troubleshooting,

upgrading, and managing the Intel® Server System SR9000MK4U. This document

provides an overview of the features of the server system utilities, and instructions on how

to install, setup, and manage the system. For the latest version of this manual, see http://

support.intel.com/support/motherboards/server/SR9000MK4U/.

Manual Organization

Chapter 1 provides a brief overview of the chassis features for the Server System

SR9000MK4U.

Chapter 2 provides an overview of the features of the boards used in the Server System

SR9000MK4U.

In this chapter, you will find a list of the server board features, photos of the product, and

product diagrams to help you identify components and their locations.

Chapter 3 provides instructions for adding and replacing components. Use this chapter for

step-by-step instructions and diagrams for installing or replacing components such as the

hard drives, memory, processor, fans, boards and other components.

Chapter 4 tells you how to install the system into a rack environment.

Chapter 5 provides instructions on using the utilities that are shipped with the board or

that may be required to update the system. This includes how to navigate through the

BIOS Setup screens, and how to clear the CMOS.

Chapter 6 provides troubleshooting information. In this chapter, you will find suggestions

and steps to follow for performing troubleshooting activities to identify the source of a

problem.

Appendices provide tables of POST codes, SEL codes, safety information, safety start-up

warnings, and how to get help.

viii Intel®Server System SR9000MK4U Product Guide

Product Accessories

You may need or want to purchase one or more of the following accessory items for your

server:

Processor, memory DIMMs, hard drive, USB floppy drive, CD-ROM or DVD-ROM

drive, RAID controller, operating system.

For information about which accessories, memory, processors, and third-party hardware

have been tested and can be used with your board, and for ordering information for Intel

products, see http://support.intel.com/support/motherboards/server/SR9000MK4U/

compat.htm.

Additional Information and Software

If you need more information about this product or information about the accessories that

can be used with this server board, use the following resources. These files are available at

http://support.intel.com/support/motherboards/server/SR9000MK4U/

Unless otherwise indicated in the table below, once on this Web page, type the document

or software name in the search field at the left side of the screen and select the option to

search “This Product.”

Table 1. Additional Information and Software

For this information or

software Use this Document or Software

For in-depth technical

information about this

product, including BIOS

settings and chipset

information

Intel® Server System SR9000MK4U Technical Product

Specification

If you just received this

product and need to

install it

Intel® Server System SR9000MK4U Quick Start User's Guide in the

product box

Accessories or other Intel

server products Spares and Configuration Guide

Hardware (peripheral

boards, adapter cards)

and operating systems

that have been tested with

this product

Tested Hardware Operating Systems List

Processors that have

been tested with this

product

Supported Processors

Intel®Server System SR9000MK4U Product Guide ix

See also the Resource CD that came with your server system.

DIMMs that have been

tested with this product Tested Memory List

For drivers Driver (for an extensive list of available drivers)

Operating System Driver (for operating system drivers)

For firmware and BIOS

updates, or for BIOS

recovery

Firmware Updates

For diagnostics test

software Diagnostics

Table 1. Additional Information and Software

For this information or

software Use this Document or Software

x Intel®Server System SR9000MK4U Product Guide

Powering the System On and Off

Powering On the System Power

1. Connect the power cables to AC input power connectors in the back of the system

and to the outlet. If 100 - 110 VAC is used, both power supplies must be connected.

2. If peripheral devices are attached that need to be turned on first, power on these

peripherals. See your peripheral guides for information.

3. Press the power button on the front panel. The green power LED will light.

4. Watch the fault LED on the front panel for any signs of trouble. See the

troubleshooting information at the end of this manual for help if necessary.

Powering Off the System Power

1. If peripheral devices are attached that need to be turned off first, power off these

peripherals. See your peripheral guides for information.

2. Press the power button on the front panel. The green power LED will turn off.

Note: The system will force a power off if the power button is held down for four or more

seconds. This method should be used only if the system has locked up. If the power is

forced off, wake events, such as Wake-on-LAN, are disabled. The IPMI “Power Off”

command functions the same way as a four-second button press. When the system power is

forced off, either the power button or the IPMI “Power On” command must be used to

power the system back on.

Otros manuales para SR9000MK4U - Server System - 0 MB RAM

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de Intel

Intel

Intel R200LH2 Manual de usuario

Intel

Intel MFSYS35 Manual de usuario

Intel

Intel SC5650BCDP Guía de configuración

Intel

Intel SR1625UR - Server System - 0 MB RAM Guía de configuración

Intel

Intel SC5650HCBRP Guía de configuración

Intel

Intel SR1600UR - Server System - 0 MB RAM Manual de usuario

Intel

Intel SR1695WB Manual de usuario

Intel

Intel SRKA4 - Server Platform - 0 MB RAM Manual de usuario

Intel

Intel BB5520URR Manual de usuario

Intel

Intel MFSYS25V2 Manual de usuario

Intel

Intel SPSH4 - Server Platform - 0 MB RAM Manual de usuario

Intel

Intel S2600WF Series Guía de configuración

Intel

Intel SR1625UR - Server System - 0 MB RAM Manual de usuario

Intel

Intel P4000M Manual de usuario

Intel

Intel P4304SC2SFEN Manual de usuario

Intel

Intel S7000FC4UR - Server System - 0 MB RAM Manual de usuario

Intel

Intel H2000WP Manual de usuario

Intel

Intel R2000WF series Manual de usuario

Intel

Intel SC450NX - Server Platform - 0 MB RAM Manual de usuario

Intel

Intel SR1625UR - Server System - 0 MB RAM Manual de usuario

Intel

Intel H2000WP Manual de usuario

Intel

Intel R1000SP Manual de usuario

Intel

Intel SC5650HCBRP Manual del propietario

Intel

Intel SSR212MC2 - Storage Server Hard Drive Array Guía

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario