Intel I845E Manual de usuario

TRADEMARK

All products and company names are trademarks or registered

trademarks of their respective holders.

These specifications are subject to change without notice.

Manual Revision 1.0

September 03, 2003

User’User’

User’ss

ManualManual

Manual

$ "*-)

IntelIntel

Intel i845Ei845E

i845Ei845E

i845E mainboardmainboard

mainboardmainboard

mainboard

for Intel Socket 478 processorfor Intel Socket 478 processor

for Intel Socket 478 processor

All manuals and user guides at all-guides.com

DISCLAIMER OF WARRANTIES:

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE

DESCRIPTION ON THE FACE OF THE MANUFACTURER LIMITED

WARRANTY. THE MANUFACTURER EXPRESSLY EXCLUDES ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, REGARDING ITS

PRODUCTS; INCLUDING ANY IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR

NONINFRINGEMENT. THIS DISCLAIMER OF WARRANTIES SHALL

APPLY TO THE EXTENT ALLOWED UNDER LOCAL LAWS IN THE

COUNTRY PURCHASED IN WHICH LOCAL LAWS DO NOT ALLOW

OR LIMIT THE EXCLUSION OF THE IMPLIED WARRANTIES.

All manuals and user guides at all-guides.com

Table of Contents

Section 1 Introduction

Package Contents ...................................................... 1-1

Intel Pentium 4 Processors......................................... 1-2

Chipset Components.................................................. 1-2

Accelerated Graphics Port ......................................... 1-

Ultra ATA66/100 ........................................................ 1-

Hardware Monitoring ................................................. 1-

LAN (Optional) .......................................................... 1-

Mainboard Form-Factor ............................................. 1-4

I/O Shield Connector.................................................. 1-5

Power-On/Off (Remote).............................................. 1-5

System Block Diagram ............................................... 1-6

Section 2 Features

Mainboard Features ................................................... 2-1

Section 3 Installation

Mainboard Layout ..................................................... -2

Easy Installation Procedure

CPU Installation ......................................................... -

Jumper Settings .......................................................... -5

System Memory Configuration .................................. -6

Expansion slots .......................................................... -8

Device Connectors..................................................... -10

External Modem Ring-in Power ON and

Keyboard Power ON Function (KBPO) ..................... -15

STR (Suspend To RAM) Function .......................... -16

Page

All manuals and user guides at all-guides.com

Section 4 BIOS Setup

Main Menu ................................................................ 4-1

Standard CMOS Setup ............................................... 4-2

Advanced BIOS Features .......................................... 4-

Advanced Chipset Features ...................................... 4-8

Integrated Peripherals ................................................ 4-10

Power Management Setup ......................................... 4-15

PNP/PCI Configuration Setup.................................... 4-20

PC Health Status ........................................................ 4-22

Power BIOS Features ................................................. 4-24

Defaults Menu ........................................................... 4-28

Supervisor/User Password Setting ............................ 4-29

Exit Selecting .............................................................. 4- 0

Section 5 Driver Installation

Easy Driver Installation.............................................. 5-1

Realtek Sound Manager Quick User Guide ................ 5-2

Appendix Appendix A

Realtek Media Player Users Guide ............................ A-1

Appendix B

Update Your System BIOS ......................................... B-1

Appendix C

EEPROM BIOS Remover ........................................... C-1

Appendix D

GHOST 7 Quick Users Guide (Optional) ................... D-1

All manuals and user guides at all-guides.com

Introduction

Page 1-1

USERS

MANUAL

Section 1

INTRODUCTION

Package Contents

Contents

A. Mainboard

B. Users manual

C. Floppy drive cable

D. HDD drive cable

E. CD or diskette (drivers and

utilities

Optional Items

F. Extra USB2.0 port cable

G. S/PDIF Module

If you need the optional item, please

contact your dealer for assistance.

All manuals and user guides at all-guides.com

Introduction

Page 1-2

Intel®Pentium®4 processors

The Intel Pentium 4 processor, Intel's most advanced, most powerful processor for

desktop PCs and entry-level workstations, is based on Intel NetBurstTM

microarchitecture. The Pentium 4 processor is designed to deliver performance

across applications and usages where end-users can truly appreciate and experience

the performance. These applications include Internet audio and streaming video,

image processing, video content creation, speech, 3D, CAD, games, multimedia, and

multi-tasking user environments. The Pentium 4 processor delivers this world-class

performance for consumer enthusiasts and business professional desktop PC users

as well as for entry-level workstation users.

Intel adds support for Hyper-Threading Technology to the Pentium 4 processor

family. HT Technology allows a single, physical Pentium 4 processor to function as

two logical processor for next generation multi threaded application.

For more information about all the new features Pentium 4 deliver check out the

Intel website at http://www.intel.com

Chipset Components

This board is designed with Intel® 845E chipset. The Intel® 845E chipset consists of

the Memory Controller Hub (MCH and the I/O Controller Hub (ICH4 .



Memory Controller Hub (MCH)

The MCH provides the interconnect between the AGP, DDR SDRAM and the

system logic. It integrates:

- Supports for single processor with a data transfer rate of 400/533/533+MHz.

- Supports dual channel of 200/266/266+ DDR SDRAM up to 2GB.

- 4X 1.5V AGP interface (Only support 1.5V on AGP interface .

- Downstream hub link for access to the ICH4.



I/O Controller Hub (ICH4)

The I/O controller Hub provides the I/O subsystem with access to the rest of the

system. Additionally, it integrates many I/O functions:

All manuals and user guides at all-guides.com

Introduction

Page 1-3

- Upstream hub link for access to the MCH

- 2-Channel Ultra ATA/100 Bus Master IDE controller

- USB controller

- SMBus controller

- LPC / Flash BIOS interface

- PCI 2.2 interface

- Integrated System Management Controller

Accelerated Graphics Port (AGP)

The AGP slot on the board is compliant with the new AGP 2.0 specification. This

new specification enhances the functionality of the original AGP specification by

allowing 4X data transfers ( 4 data samples per clock resulting in maximum band-

width of 1GB/s. In addition, it defines 1.5 volt power supply operation. Complying

with this specification, this board supports external AGP-4X cards with Fast Write

Transactions. Only 1.5V AGP cards are supported.

Ultra ATA/66/100

The mainboard provides an Ultra ATA/66/100 Bus Master IDE controller. This

controller supports Ultra ATA/66/100 protocols which are ideal to support demanding

applications such as real-time video, multimedia, and a high performance operating

system. A new IDE cable is required for Ultra ATA/66/100; this cable is an 80-pin

conductor cable which is backward compatible with ATA/33 connectors.

Hardware Monitoring

Hardware monitoring enables you to monitor various aspects of the system operation

and status. The features include CPU temperature, voltage and fan speed in RPMs.

LAN (Optional)

This mainboard is optionally mounted with a LAN chipset. It allows the mainboard to

connect to a local area network by means of a network hub.

All manuals and user guides at all-guides.com

Introduction

Page 1-4

Mainboard Form-Factor

This board is designed with ATX form factor - the latest industry standard for

chassis design. The ATX form factor is essentially a Baby-AT baseboard rotated

90 degrees within the chassis enclosure and a new mounting configuration for

the power supply. With these changes the processor is relocated away from the

expansion slots, allowing them all to hold full length add-in cards. ATX defines a

double height aperture to the rear of the chassis which can be used to host a

wide range of onboard I/O. Only the size and position of this aperture is defined,

allowing PC manufacturers to add new I/O features (e.g.; TV input, TV output,

joystick, modem, LAN, audio, etc. to systems. This will help systems integrators

differentiate their products in the marketplace, and better meet your needs.

 By integrating more I/O down onto the board and better positioning the hard

drive and floppy connectors material cost of cables and add-in cards is

reduced.

 By reducing the number of cables and components in the system, manufac-

turing time and inventory holding costs are reduced and reliability will

increase.

 By using an optimized power supply, it's possible to reduce cooling costs

and lower acoustical noise. An ATX power supply, which has a side-

mounted fan, allows direct cooling of the processor and add-in cards making

a secondary fan or active heatsink unnecessary in most system applications.

PCI slots

Expandable I/O

Figure 2: Summary of ATX chassis features

CPU socket

Single chassis

fan for system

AT X

Power

Supply

ATX power connector

IDE connectors

AGP slot

3 1/2-inch

Bay

5 1/4-inch

Bay

ATX 12V power

connector

Floppy

connector

All manuals and user guides at all-guides.com

Introduction

Page 1-5

Power-On/Off (Remote)

This board has a 20-pin ATX power supply connector (Figure 4 . For power

supplies that support the Remote On/Off feature, this should be connected to the

mainboard front panel PW_ON connector for the computer power On/Off button.

This board has been designed with Soft Off" function. You can turn off the system

in two ways: by pressing the front panel power On/Off button or using the "Soft

Off" function that can be controlled by an operating system such as Windows®XP/

ME/2000/98.

Note: For maintaining the DDR SDRAM power during STR (ACP S3) function, it is strongly

recommended to use power supplies that have a +5VSB current of (>=) 2A. Please check the

5VSBs specification printed on the power supplys outer case.

Note: The board requires a minimum of 250 Watt power supply to operate. Your system configura-

tion (amount of memory, add-in cards, peripherals, etc.) may exceed this minimum power

requirement. To ensure that adequate power is provided, use a 300 Watt (or higher) power

supply.

I/O Shield Connector

The I/O back panel for this mainboard is shown below (Figure 3 .

Figure 3: I/O ports

PW-ON

Case (chassis) Po er ON/OFF button (PW-ON)

POWER SUPPLY

12V 4-pin

20-pin

Figure 4: Simple ATX po er ON/OFF controller

USB 2.0

port

PS/2 Mouse

PS/2 Keyboard

COM1

Parallel Port

RJ45 L N Joystick/Midi port

COM2

(Optional)

Mic-in/Center&Subwoofer(Pink)

Line-out/Front out (Lime)

Line-in/Rear out (Light Blue)

All manuals and user guides at all-guides.com

Introduction

Page 1-6

Figure 5: System Block Diagram

System Block Diagram

All manuals and user guides at all-guides.com

Otros manuales para i845E

Tabla de contenidos

Otros manuales de Placa madre de Intel

Intel

Intel D845BG Manual de usuario

Intel

Intel BOXDG41BI Guía de configuración

Intel

Intel BOXDG43GT Manual de usuario

Intel

Intel D945PVS Manual de usuario

Intel

Intel MB899 Manual de usuario

Intel

Intel D915GMHLK - Desktop Board - Mainboard Manual de usuario

Intel

Intel DH61AG Manual de usuario

Intel

Intel DB65AL Manual de usuario

Intel

Intel BOXD845GLVAL - 845GL CEL/P4 400MHZ FSB UATX Manual de usuario

Intel

Intel BC370Q Manual de usuario

Intel

Intel BOXDG965WHMKR Manual de usuario

Intel

Intel DQ33HS Manual de usuario

Intel

Intel DG41TX Manual de usuario

Intel

Intel DG41AN Manual de usuario

Intel

Intel DH61BE Manual de usuario

Intel

Intel DQ77MK Manual de usuario

Intel

Intel D945GCNL - Desktop Board Motherboard Manual de usuario

Intel

Intel DH61WW Guía de configuración

Intel

Intel BLKD945GCLF2 Manual de usuario

Intel

Intel R1000 Manual de usuario

Intel

Intel DZ75ML-45K Manual de usuario

Intel

Intel D848PMB Manual de usuario

Intel

Intel D848PMB Manual de usuario

Intel

Intel D945PLNM Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario

Intel i845E Manual de usuario

Manuales populares de Placa madre de otras marcas