Intel Desktop Board D850EMD2 Manual de usuario

Intel®Desktop Boards

D850EMD2 and D850EMV2

Quick Reference

This guide is written for technically qualified personnel with

experience installing and configuring desktop boards.

Before You Begin

Warning and Cautions......................................................................... 3

Safety and Regulatory Notice.............................................................. 3

Desktop Board Components ....................................................... 4

Supported Components

Processors ........................................................................................... 6

Memory Module Requirements........................................................... 6

Installation Steps

1 Installing the I/O Shield ................................................................... 7

2 Installing the Desktop Board ............................................................ 7

3 Installing the Processor .................................................................... 8

4 Installing the Memory Modules ....................................................... 8

5 Installing an AGP Card ....................................................................9

6 Connecting the Fans ........................................................................ 10

7 Attaching the IDE Drives ................................................................ 10

Using the BIOS Setup Program................................................. 11

Setting the BIOS Configuration Jumper Block................. 11

BIOS Setup Program Defaults.................................................... 12

Items on the Intel®Express Installer CD-ROM

• Product warranty

• Intel®Express Installer

• Intel®Desktop Boards D850EMD2 and D850EMV2 Product

Guide

• Software utilities and drivers

• Software license agreement

• Readme file

Part number: A85187-003

2 Intel Desktop Boards D850EMD2 and D850EMV2

Quick Reference

Getting Help

View or download product support information from Intel’s World Wide Web

site:http://support.intel.com/support/motherboards/desktop

Documents on the Web site include:

• Intel®Desktop Board D850EMD2/D850EMV2 Technical Product

Specification

• Intel®Desktop Board D850EMD2/D850EMV2 Specification Update

If you can’t find the information you need on the Web, contact your point of

purchase. The Intel World Wide Web site also includes telephone numbers and

billing charges, if applicable, for Intel customer support.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH

INTEL®PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL

OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED

BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND

CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO

LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR

IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL

PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO

FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR

INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL

PROPERTY RIGHT. INTEL PRODUCTS ARE NOT INTENDED FOR USE IN

MEDICAL, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS. INTEL MAY

MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT

ANY TIME, WITHOUT NOTICE.

The D850EMD2 and D850EMV2 desktop boards may contain design defects or

errors known as errata which may cause the product to deviate from published

specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest

specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this

document, or other Intel literature, may be obtained from Intel Corporation by

going to the World Wide Web site at: http://www.intel.com or by calling

1-800-548-4725.

Intel and Pentium are registered trademarks of Intel Corporation or its

subsidiaries in the United States and other countries.

†Other names and brands may be claimed as the property of others.

Intel Desktop Boards D850EMD2 and D850EMV2 3

Quick Reference

Before You Begin

Warning and Cautions

WARNING

Disconnect the desktop board’s power supply from its AC power

source before you connect or disconnect cables, or install or remove

any board components. Failure to do this can result in personal

injury or equipment damage. Some circuitry on the desktop board

can continue to operate even though the front panel power switch is

off.

CAUTION

Electrostatic discharge (ESD) can damage desktop board components.

Install the board at an ESD-controlled workstation. If such a workstation

is not available, wear an antistatic wrist strap or touch the surface of the

antistatic package before handling the board.

CAUTION

Many of the internal connectors provide operating voltage (+5 V DC and

+12 V DC, for example) to devices inside the computer chassis, such as

fans and internal peripherals. These connectors are not overcurrent

protected. Do not use these connectors for powering devices external to

the computer chassis. A fault in the load presented by the external

devices could cause damage to the computer, the interconnecting cables,

and the external devices themselves.

Safety and Regulatory Notice

See the Intel®Desktop Boards D850EMD2 and D850EMV2 Product Guide for

all applicable regulatory compliance statements, product certification markings,

and safety and electromagnetic compatibility (EMC) standards and regulations

these desktop boards are compliant with.

Replacement battery warning label provided: Place the label inside the chassis

in an easy-to-see location near the battery but not on the board itself.

Intended uses: This product was evaluated as information technology

equipment (I.T.E.) for home or office use when installed into an appropriate

computer chassis. Other end uses or locations may require further evaluation.

4 Intel Desktop Boards D850EMD2 and D850EMV2

Quick Reference

Desktop Board Components

OM13641

S R

B DA

USB 2.0

Devices

Line

Ground

Reset

HD LED

Power LED

No Connection

J8J1

+5V

continued

Intel Desktop Boards D850EMD2 and D850EMV2 5

Quick Reference

Desktop Board Components (continued)

A ADI AD1885 audio codec O Primary IDE connector

B ATAPI auxiliary line-in

connector

P Secondary IDE connector

C AGP connector Q Front panel USB 2.0 connector

D ATAPI CD-ROM connector R Alternate power/sleep LED

connector

E Front panel audio connector S Chassis fan connector (fan 2)

(tachometer input)

F Chassis intrusion connector T Battery

G 12 V processor core voltage

connector

U Speaker

H Processor fan connector

(tachometer input)

V BIOS configuration jumper

I Intel®82850E Memory

Controller Hub (MCH)

W SCSI hard drive activity LED

connector

J Processor socket X Intel®82801BA I/O Controller

Hub (ICH2)

K RIMM†sockets Y NEC D720100AGM USB

2.0 controller

L RIMM fan connector (fan 1) Z PCI bus add-in card connectors

M Power connector AA Communication and Networking

Riser (CNR) (optional)

N Diskette drive connector BB Chassis fan (fan 3)

CAUTION

Failure to use an ATX12V power supply, or not connecting the additional

power supply lead to the Desktop Board D850EMD2 or D850EMV2 may

result in damage to the desktop board. For more information on the

ATX12V power supply, refer to the Intel Desktop Boards D850EMD2 and

D850EMV2 Product Guide on the Intel

®Express Installer CD-ROM.

✏

NOTE

The number of PCI slots on your desktop board may differ from those in

the illustration.

6 Intel Desktop Boards D850EMD2 and D850EMV2

Quick Reference

Supported Components

Processors

The Intel desktop boards support the following processors:

Type

Designation

Front Side Bus

Frequency

L2 Cache

Intel®Pentium®4 processor on

.13 micron process in an

mPGA478 package

2.53, 2.40 and

2.26 GHz

533 MHz 512 KB

Intel Pentium 4 processor on

.13 micron process in an

mPGA478 package

2.20, 2A, 1.80A,

1.70A, and

1.60A GHz

400 MHz 512 KB

Intel Pentium 4 processor on

.18 micron process in an

mPGA478 package

2, 1.90, 1.80, 1.70,

1.60, and 1.50 GHz

400 MHz 256 KB

For the latest information on processors supported by Desktop Boards

D850EMD2 and D850EMV2, refer to the Intel World Wide Web site at:

http://support.intel.com/support/motherboards/desktop

Memory Module Requirements

The desktop boards have four 2.5 V memory module sockets that support

RIMMs containing Direct Rambus†DRAM (RDRAM) devices.

The desktop boards support the following memory features:

• Maximum of 32 RDRAM devices per channel

• Memory configurations from 128 MB (minimum) to 2 GB (maximum)

using 128/144 Mbit or 256/288 Mbit technology

• PC800-40 compliant RDRAM with 533 MHz front side bus (FSB)

operation

• PC800-40 and PC800-45 compliant RDRAM with 400 MHz FSB operation

• Single or double-sided RIMM modules

• Serial Presence Detect (SPD) memory only

• ECC and non-ECC support

✏

NOTE

For information about vendors that support these memory requirements,

refer to the D850EMD2 or D850EMV2 link on this Intel World Wide Web

site: http://support.intel.com/support/motherboards/desktop

Intel Desktop Boards D850EMD2 and D850EMV2 7

Quick Reference

Installation Steps

1 Installing the I/O Shield

The desktop boards come with an I/O shield. Install the I/O shield before

installing the desktop board in the chassis. Place the shield inside the chassis as

shown in the following figure. Press the shield into place so that it fits tightly

and securely. If the shield doesn’t fit, obtain a properly sized shield from the

chassis supplier.

OM13621

2 Installing the Desktop Board

CAUTION

Failure to use an ATX12V power supply, or not connecting the additional

power supply lead to the Desktop Board D850EMV2 or D850EMD2 may

result in damage to the desktop board. For more information on the

ATX12V power supply, refer to the Intel Desktop Boards D850EMD2 and

D850EMV2 Product Guide on the Intel Express Installer CD-ROM.

Refer to your chassis manual for specific instructions on installing and removing

the desktop board from the chassis.

The Desktop Board D850EMD2 is secured to the chassis with 11 screws and

Desktop Board D850EMV2 with eight screws. Refer to the board illustration on

page 4 for the location of the mounting holes.

8 Intel Desktop Boards D850EMD2 and D850EMV2

Quick Reference

3 Installing the Processor

1. Observe the precautions in “Before You Begin”on page 3.

2. Lift the processor socket lever.

3. Install the processor so that the corner with the triangle marking (A) is

aligned with the corner where the lever is attached to the socket.

4. Lower the lever back to its original position.

OM12078

mPGA478B

5. For instructions on how to install the processor fan heat sink, refer to the

boxed processor manual or the Intel World Wide Web site at:

http://support.intel.com/support/processors/pentium4/intnotes478.htm

4 Installing the Memory Modules

CAUTIONS

Install a Continuity RIMM (CRIMM) in each unused memory socket or the

board will not boot.

High insertion force may be required to install the RIMMs and CRIMMs.

Use caution when inserting the RIMMs and CRIMMs to prevent the board

from flexing.

Install RIMMs into bank 0 first. If the desired memory configuration has been

achieved, insert CRIMMs into bank 1.

If memory is to be installed in bank 1, the RIMM modules to be installed must

be identical in size and density to each other, and match the speed of the RIMM

modules in bank 0. For example, if bank 0 has two 128 MB RIMMs of

PC800 RDRAM, bank 1 would require PC800 RDRAM also, however, any

other supported RIMM modules such as 64 MB or 128 MB could be used.

To install RIMMs, follow these steps:

1. Remove the AGP video card (if it interferes with the RIMM clips from

being easily opened and closed).

2. Align the small notch in the bottom edge of the RIMM with the key in the

socket.

Intel Desktop Boards D850EMD2 and D850EMV2 9

Quick Reference

3. Insert the bottom edge of the RIMM into the socket.

4. When the RIMM is inserted, push down on the top edge of the RIMM until

the retaining clips snap into place. Make sure the clips are firmly in place.

OM13624

5 Installing an AGP Card

✏

NOTE

The desktop boards D850EMD2 and D850EMV2 are only compatible with

1.5 V AGP cards.

The desktop boards D850EMD2 and D850EMV2 have an integrated AGP

retention mechanism. Follow these instructions to install an AGP card:

1. Place the AGP card in the AGP connector.

2. Press down on the card until it is completely seated in the AGP connector

and the card retention notch snaps into place around the AGP card RM pin.

3. Secure the card’s metal bracket to the chassis back panel with a screw.

To remove the AGP card, push back on the RM lever (A) until the retention pin

completely clears the notch in the card.

OM13851

10 Intel Desktop Boards D850EMD2 and D850EMV2

Quick Reference

6 Connecting the Fans

The following figure shows the location of the fan connectors. Connect the

chassis fan cables to the desktop board connectors as shown in the figure below.

The processor fan and fan 2 can be monitored via the Intel®Active Monitor

software application.

Fan 2

Processor Fan

Fan 1

OM13652

Fan 3

D850EMV2 Board Fan Connectors

(D850EMD2 does not have fan 3)

7 Attaching the IDE Drives

The Intel®boxed desktop board package includes two IDE cables. Either cable

can connect two drives to the desktop board. The cables support the Ultra

DMA-33 (40-contact, 40-conductor) or ATA-66/100 (40-contact, 80-conductor)

transfer protocols and are backward compatible with drives using slower IDE

transfer protocols.

Otros manuales para Desktop Board D850EMD2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Intel

Intel

Intel DQ67OW Manual de usuario

Intel

Intel D845PEBT2 Manual de usuario

Intel

Intel DP43BF Manual de usuario

Intel

Intel DG43NB - CARACTERISTIQUES TECHNIQUES Manual de usuario

Intel

Intel D845PESV Manual técnico

Intel

Intel DG33FB - Desktop Board Classic Series... Manual de usuario

Intel

Intel SBC 80/10 Guía rápida de usuario

Intel

Intel D955XBK Manual de usuario

Intel

Intel MI910F Manual de usuario

Intel

Intel MB960 Manual de usuario

Intel

Intel DQ67SW Manual de usuario

Intel

Intel i845E Manual de usuario

Intel

Intel 945GC Manual de usuario

Intel

Intel D925XHY Manual de usuario

Intel

Intel D845GRG Manual de usuario

Intel

Intel AX965Q Manual de instalación y operación

Intel

Intel D510MO Manual

Intel

Intel Desktop Board D845GVFN Manual de usuario

Intel

Intel D945PWM Manual de usuario

Intel

Intel BLKD945GCNL Guía de configuración

Intel

Intel DG965OT - Desktop Board Motherboard Manual de usuario

Intel

Intel BX Manual de usuario

Intel

Intel Thin Mini-ITX Guía

Intel

Intel D845GVSR - Desktop Board Motherboard Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario