Intel ATC6430M Manual de usuario

How To Use This Manual ATC6430M Mainboard

HOW TO USE THIS MANUAL

This manual is written in a user-friendly style. It would be

advisable for users to read it in an orderly sequence :

1. For Hardware Information:

Read COMPONENT LOCATION DIAGRAM,Page A: QUICK JUMPER &

CONNECTOR SETTING,Page B: Slot 1 and CPU Installation, Page C:

CONNECTORS AND JUMPERS DESCRIPTION and Page D:List of Packaging.

2. For Mainboard and System Features:

Read “Chapter 1 System Features” , and you will find helpful information

on mainboard and system features. Especially, when you want to do some

feature setup, detailed instructions are provided therein to help you through.

3. For CPU, Memory and Drivers Installation:

Read “Chapter 2 Installation” for your CPU, memory and application drivers

installation. Detailed instructions are provided to guide all kinds of users.

4. For BIOS Update and Setup:

Read “Chapter 3 Award BIOS Setup” for updating your mainboard BIOS and

setting up your BIOS Configuration.

5. For other Technical Support:

Read “APPENDIX A”, fill and send the Request Form to your dealer for other

technical support.

The default settings on a mainboard is not necessarily what user expects. A

user-friendly manual would be the handiest assistant to help change the on-board

configuration or default setting. In case this manual cannot solve all your problems,

please ask your dealer for help and be sure the warranty on your system is still valid.

REMARK: Intel®is a registered trademark of Intel Corporation.

All other brands and product names are registered trademarks of their respective companies

ATC6430M Mainboard Contents

CONTENTS

QUICK JUMPER & CONNECTOR SETTING..........................A

SLOT 1 AND PENTIUM II/III INSTALLATION...................B

CONNECTORS AND JUMPERS DESCRIPTION....................C

CHECKLIST OF PACKAGING................................................D

HOW TO USE THIS MANUAL

TABLE OF CONTENTS

CHAPTER 1 System Features......................................................1

1-1 Introduction.............................................................................. 1

1-2 System Specifications................................................................2

1-3 Features Highlight...................................................................... ...3

1-3-1 Add-on Features for VGA in Intel 810.................................4

1-3-2 Add-on Features for Audio...................................................4

1-3-3 AMR and AC'97 CODEC Controller...................................5

1-3-4 Software Power Off Control.................................................5

1-3-5 Modem Ring On...................................................................6

1-3-6 SB-Link Sideband Signal.....................................................6

1-3-7 Ultra DMA 66 Cable(Optional)............................................7

1-3-8 Wake-On-LAN......................................................................8

CHAPTER 2 Installation..................................................................9

2-1 Installation Procedure .................................................................9

2-2 CPU Installation...........................................................................10

2-3 System Memory Installation.........................................................11

2-4 Intel 810 Driver Installation...........................................................12

2-5 VGA Driver Installation................................................................12

2-6Sound Driver Installation..............................................................12

CHAPTER 3 Award BIOS Setup...................................................13

3-1 Update BIOS Procedure..............................................................14

3-2 System BIOS Configuration Setup ...............................................16

3-2-1 Standard CMOS Features......................................................................18

3-2-2 Advanced BIOS Features.......................................................................21

3-2-3 Advanced Chipset Features...................................................................24

3-2-4 Integrated Peripherals............................................................................26

Contents ATC6430 Mainboard

3-2-5 Power Management Setup......................................................................27

3-2-6 PNP/PCI Configuration..........................................................................31

3-2-7 PC Health Status ...................................................................................33

3-2-8 Frequency / Voltage Control...................................................................34

3-2-9Load Fail-Safe Defaults...........................................................................35

3-2-10 Load Optimized Defaults.................... ..................................................35

3-2-11SupervisorPassword/User Password......................................................35

3-2-12Save & Exit Setup.................................................................................35

3-2-13Exit without Saving................................................................. ...............35

Appendix A Technical Support Request Form

ATC6430M Mainboard Chapter 1 System Features

CHAPTER 1

System Features

1-1 Introduction

6430M mainboard is designed to run with Intel 810 chipset to enhance the

performance and extraordinary value of the Intel CeleronTM processor-powered

PC.Ontheotherhand,itismountedwithbothSlot1andSocket 370 connector for

users to make their CPU choice. It supports 66MHz, 100MHz and 133MHz Host

Bus Intel PPGA CeleronTM CPUs. To enhance its peripheral support, 5 PCI slots

are mounted on board, with an optional ISA slot to meet some exceptional users’

requirements. In addition to the incorporated VGA in Intel 810, its wide and

inclusive add-on features are described one by one in later part of this chapter.

Before that, let us see some architectural features of Intel 810.

Chipset Combination FW82810DC100 / FW82810E

+ FW82801AA

With 4MB Display cache Yes

Supporting UDMA 66 Yes

Shared Memory After

installing VGA driver 7MB

Users should check with your dealer for the right chipset type on your mainboard.

Chapter 1 System Features ATC

6430M Mainboard

1-2 System Specifications of 6430M Mainboard

:CPU Support:

uSingle CPU, with both Slot 1 and PPGA Socket 370 on board for choice.

uSupports CPU Clock 66MHz, 100MHz and 133MHz (133MHz support “Slot

1” socket only). CPU Clock Ratios from 3.0x to 8.0x (step 0.5x).

uSupports CPUs : Pentium II 233MHz~450MHz, Celeron 300MHz~500MHz,

and Pentium III 450MHz~650MHz.

uCPU Core Voltage 1.30V~2.05V (step 0.05V), and 2.1V~3.5V (Step 0.1V);

CPU~I/O Voltage 3.3V.

uBuilt-in Switching Voltage Regulator, supporting Vcore autodetection.

:Memory Support:

uTwo DIMM sockets on board supporting up to 512MB SDRAM.

uPC-66 / PC-100 compatible.

:I/O System

uOn-board Intel 810 Chipset for I/O Control:

FW82810DC100 / FW82810E + FW82801AA.

uBus Frequency 66MHz/100MHz

u5 PCI slots on board, compliant with version 2.2 PCI Local Bus spec.

uOne Optional ISA slot.

uOne AMR (Audio, Modem Riser) slot on board.

uDual Master IDE connectors, supporting UDMA33/66 for 4 IDE devices such

as high capacity HDD, CD-ROM, LS-120 and tape backup etc.

uTwo USB connectors in stack supporting up to 127 USB devices.

uPS/2 Keyboad and PS/2 Mouse connectors.

uOne Infrared (IrDA TX/DX) connector.

uOne FDD port supporting two Floppy drives of : 1.2MB / 1.44MB / 2.88MB.

uOne parallel port for SSP/EPP/ECP mode printer.

uTwo 16550A Fast UART compatible connectors for serial and VGA port.

uOne Game /Midi port and 3 Audio Jacks for Speak-out, Line-in and

Microphone-in.

uOne SB-Link Connector for Sound Card and PCI connection.

ATC6430M Mainboard Chapter 1 System Features

:BIOS Support:

uBuilt-in VGA BIOS in Intel 810; and built-in Keyboard BIOS;.

uAWARD BIOS in Intel 810, providing CMOS Setup Utilities:

-Standard CMOS Features Setup for Date, Drives and VGA ;

-Advanced BIOS Features Setup for CPU Cache, Self Test, Boot Device,

Typematic Rate , and Security Options etc.;

-Advanced Chipset Features Setup for SDRAM CAS, RAS, System BIOS

Cacheable, and Video BIOS Cacheable etc.;

-IntegratedPeripheralsSetup for IDE Mode, USB, Audio, and Modem etc.;

-Power Management Setup on Video, HDD, CPU etc.;

-PnP/PCI Configurations Setup for PnP, Reset, Resources etc.;

-PC Health Status Control and Setup;

-Frequency / Voltage Control on CPU, SDRAM, PCI & SSC etc.;

-Load Fail-Safe Defaults;

-Load Optimized Defaults;

-Set Supervisor/User Password;

:Board Dimension :308mm x 202mm, in ATX form Factor. with one ATX Power

Connector.

Chapter 1 System Features ATC

6430M Mainboard

1-3 Features Highlight

1-3-1 Add-on Features for VGA in Intel 810:

:Integrated Graphics Controller

u3D Hyper Pipelined Architecture.

uFull 2D H/W Acceleration.

uMotion Video Acceleration.

:3D Graphics Visual Enhancements

uFlat & Gouraud Shading.

uMip Maps with Bilinear and Anisotropic Filtering.

uFogging Atmospheric Effects.

uZ Buffering.

u3D Pipe 2D Clipping.

uBackface Culling.

:3D Graphics Texturing Enhancements

uPer Pixel Perspective Correction Texture Mapping.

uTexture Compositing.

uTexture Color Keying/Chroma Keying.

uIntegrated 24-bit 230MHz RAMDAC.

:2D Graphics

uUp to 1600 x 1200 in 8-bit Color at 85 Hz Refresh.

uHardware Accelerated Functions.

:H/W Motion Compensation Assistance for S/W MPEG2 Decode

uSoftware DVD at 30fps.

uH/W Overlay Engine with Bilinear Filtering.

1-3-2 Add-on Features for Audio:

:Intel 810 ICH with built-in AC’97 controller.

:Supporting HRTF-based 3D positional audio, A3D, Q3D, wavetable, and 3D

surround sound.

Note: If you want to enable the onboard AC’

97 CODEC, you need to set JP9 pin

2-3closed. But in this way, the AMR slot will only accept a

riser board with

Modem CODEC and cannot accept another Audio Riser.

ATC6430M Mainboard Chapter 1 System Features

1-3-3 AMR and AC’97 CODEC Controller

AMR slot and AC’97 CODEC are integrated into the Mainboard to enable audio and

modem playback.

AMR (Audio/Modem Riser) slot is mounted on board to connect riser board with

Audio and/or Modem CODEC (AMC/AC/MC Adapters). The AMR specification

developed by Intel provides a mechanism for AC’97 codes to be on a riser card.

To enable the onboard AC’97 CODEC, set JP9 pin 2-3closed. And in such way,

you can further plug ariser board with Modem CODEC to the AMR slot. Otherwise,

disabling onboard AC’97 CODEC by setting JP9 1-2 closed, you can plug ariser

board with Audio/Modem CODEC to the AMR slot.

See Page A for AMR location on 6430M Mainboard.

1-3-4 Software Power Off Control

This mainboard supports Software Power Off Control feature through the SMM code

in the BIOS under Windows 95/98, and MS-DOS operation system environment.

First, you should connect the power switch cable to the connector “PS-ON” on the

mainboard. In the BIOS screen of POWER MANAGEMENT SETUP’, choose “User

Define” (or “Min. Power Saving” or “Max. Power Saving”) in ‘Power Management’.

In Windows 95/98, if you want to power off the system, you just need to choose

“shutdown the computer?” in the “Shut Down Windows” of Windows 95/98. Then the

system power will be off directly, and stay at the stand-by status. If you want to restart

the system, just press the power switch button..

Note : If you are going to leave your system idle for several days, we suggest you

use hardware power off to shut down your system.

Status Power LED Light Turbo LED Light

Software power off control Light off Light off

APM mode Light on Light on

System running Light on Light on

To locate “PS-ON” header, please see “Page A Quick Jumper & Connector Setting”.

Chapter 1 System Features ATC

6430M Mainboard

1-3-5 Modem Ring On

With Modem Ring On function, the computer can wake up by remote signal

through a connected modem. This function enables users to access their computer data

from anywhere in the world. Users have to enable “Power On by Ring” in “Power

Management Setup” of the AWARD BIOS setup screens.

1-3-6SB-Link Sideband Signals

In order to migrate the legacy Sound Blaster compatible audio to the PCI bus,

EMU8008 incorporates a pair of SB-Link request/grant sideband signals (PCPCIR

EQN and PCPCIGNTN) to interface to the PCI bus. SB-Link is a mechanism that was

defined and developed by Intel as a docking solution which allows ISA slots to exist in

docking stations connected to desktop PC PCI bus.

SB-Link 2x3 sideband header, sound will also

has a 2x3 header and a cable.

PCI 5

PCI 4

SB Link

SIRQ

REQ#

GND

GNT#A GND

ATC6430M Mainboard Chapter 1 System Features

1-3-7 Ultra DMA 66 Cable (optional)

Ultra DMA 66 cable (40-pin connector & 80-line cable) is packaged while utilizing

FW82801AA chip which supports both UDMA 33 & UDMA 66 on the mainboard. In

other words, Ultra DMA 33 cable is only used with FW82801AB chip And the Ultra

DMA 66 color coded connectors are shown as bellow:

1-3-8 Wake-On-LAN

The remote Wake-On-LAN (WOL) mode of operation is a mechanism that uses

Advanced Micro Device Magic Packet technology to power on a sleeping workstation

on the network. This mechanism is accomplished when the LAN card receives a

specific packet of information, called a Magic Packet, addressed to the node on the

network. For additional protection, Secure ON is an optional security feature that can

be added to the Magic Packet that requires a password to power on the sleeping

workstation. When LAN card is in remote Wake-On-LAN mode, main system power

can be shut down leaving power only for the LAN card and auxiliary power

recondition.

The LAN card performs no network activities while in the remote Wake-On-LAN

mode of operation. It only monitors the network for receipt of a Magic Packet. If a

Magic Packet is addressed to the LAN card on the network, the LAN card wake up the

system. If the Secure ON feature has been enabled, the password added to the Magic

Packet is also verified prior to waking up the system.

You should select two kinds of PCI Ethernet cards with WOL function. One is

Intel and the other is with PME signal supporting. And you can set “PCI PME#

Grey to Slave

IDE Peripheral

Blue to Mainboard Black to

Master

IDE Peripheral

Tabla de contenidos

Otros manuales de Placa madre de Intel

Intel

Intel VIA K8T800 Manual de usuario

Intel

Intel DH61BF Guía de configuración rápida

Intel

Intel DG41TY Manual de usuario

Intel

Intel D845HV Manual de usuario

Intel

Intel i845-GE Manual de usuario

Intel

Intel DX79SI Manual de usuario

Intel

Intel DZ68PL Manual de usuario

Intel

Intel DQ67EP Manual de usuario

Intel

Intel Galileo Manual de usuario

Intel

Intel D845PT Manual de usuario

Intel

Intel Desktop Board D915PSY Manual de usuario

Intel

Intel BLKDG41RQ - Bulk Single Uatx G41 Exp Chip Manual de usuario

Intel

Intel DP55SB - Desktop Board Extreme Series... Manual técnico

Intel

Intel BOXD945PAWLK - Desktop Board D945PAW Manual de usuario

Intel

Intel S3200SHV - Entry Server Board Motherboard Manual de usuario

Intel

Intel H61 Express Manual de usuario

Intel

Intel D925XHY Manual de usuario

Intel

Intel DQ43AP Manual de usuario

Intel

Intel D102GGC2 Manual técnico

Intel

Intel SR870BN4 - Server Platform - 0 MB RAM Manual de usuario

Intel

Intel SBT2 Manual de usuario

Intel

Intel BLKDG41MJ Guía de configuración

Intel

Intel Desktop Board D525MW Guía de configuración

Intel

Intel BOXD945GCZL Guía de configuración

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario