INSYS 336 4.1 Manual de usuario

Operating Manual

INSYS Modem

INSYS Modem 336 4.1

INSYS Modem 56k 4.1

INSYS Modem 56k UL

File E239995

July 06

Any duplication of this manual is prohibited. All rights on this documentation

and the devices are with INSYS MICROELECTRONICS GmbH Regensburg.

Restrictions of guarantee

This handbook contains a concise description. The compilation of the text has

been made with the utmost care. Despite all efforts, there may be deviations

compared with the actual functions. No guarantee can therefore be given for

the accuracy of the contents. We can neither take over a legal responsibility nor

any liability for incorrect information and their consequences. Suggestions for

improvements and comments are gladly accepted.

Trademarks

The use of a trademark not shown below is not an indication that it is freely

available for use.

MNP is a registered trademark of Microcom Inc.

IBM PC, AT, XT are registered trademarks of International Business Machine Corporation.

INSYS ® is a registered trademark of INSYS MICROELECTRONICS GmbH.

Windows™ is a registered trademark of Microsoft Corporation.

Publisher:

INSYS MICROELECTRONICS GmbH

Waffnergasse 8

93047 Regensburg, Germany

Phone: 0941/58692-0

Fax: 0941/563471

E-mail: [email protected]

Internet: http://www.insys-tec.de

Subject to technical changes as well as correction.

Date: July 06

Item number: 31-22-03.034 english

INSYS Modem 336/56k 4.1 (UL) Contents

1SCOPE OF DELIVERY....................................................7

2GENERAL.....................................................................7

3NOTES REGARDING THE USE OF THE MANUAL..........8

4DESCRIPTION..............................................................9

4.1 FRONT PANEL ............................................................................9

4.2 TOP.........................................................................................9

4.3 BOTTOM ................................................................................10

4.4 USER PROFILE..........................................................................10

4.5 CONFIGURATION SOFTWARE HSCOMM .......................................11

4.6 INSTALLATION INSTRUCTIONS.....................................................14

5FUNCTIONS...............................................................17

5.1 CONFIGURATION .....................................................................17

5.2 SERIAL DATA TRANSMISSION .....................................................19

5.3 ERROR CORRECTION .................................................................23

5.4 DATA COMPRESSION ................................................................24

5.5 SELECTIVE CALL ANSWER...........................................................26

5.6 SWITCH OUTPUT .....................................................................27

5.7 ALARM INPUT .........................................................................28

5.8 SEND MESSAGES .....................................................................30

5.9 REMOTE CONFIGURATION (REMOTE CONTROL).............................32

July 06 3

Contents INSYS Modem 336/56k 4.1 (UL) 
10 REMOTE SWITCHING AND REMOTE QUERY VIA DTMF....................34 
11 ACCESS CONTROL ....................................................................36 
12 DATA TRANSMIT CONTROLLER (IDLE CONNECTION CONTROL)..........38 
13 PRIORITY CIRCUIT FOR MODEMS WITH PHONES CONNECTED IN SERIES

6OPERATION WITH A PLC...........................................42 
7FIRMWARE UPDATE .................................................43 
1 FLASHCOM.EXE .......................................................................43 
2 TERMINAL PROGRAM................................................................44 
8AT COMMAND SET ...................................................46 
1 OVERVIEW AT COMMANDS.......................................................47 
2 OVERVIEW FAX AND VOICE COMMANDS .....................................73 
3 AT MESSAGES.........................................................................73 
9S REGISTRY ...............................................................76 
1 OVERVIEW SREGISTRY .............................................................76 
2 DESCRIPTION SREGISTRY ..........................................................77 
SENDING OF SMS AS FAX OR E-MAIL .......................86 
1 SMS AS FAX ...........................................................................86 
2 SMS AS E-MAIL ......................................................................87 
FAQ...........................................................................88 
4Juli 06 

INSYS Modem 336/56k 4.1 (UL) Contents

12 SAFETY INSTRUCTIONS.............................................90

12.1 GENERAL ................................................................................90

12.2 SMS .....................................................................................90

12.3 CLEANING...............................................................................90

13 TECHNICAL DATA......................................................91

13.1 MECHANICAL FEATURES............................................................91

13.2 POWER SUPPLY .......................................................................91

13.3 SERIAL INTERFACE ....................................................................92

13.4 POSSIBLE INTERFACE SPEEDS ......................................................92

13.5 TELEPHONE INTERFACE..............................................................93

13.6 STANDARDS............................................................................94

13.7 RESET ....................................................................................95

13.8 DIGITAL INPUTS AND OUTPUTS ..................................................95

13.9 CERTIFICATIONS.......................................................................95

14 COUNTRY CODES......................................................96

July 06 5

INSYS Modem 336/56k 4.1 (UL) Scope of Delivery

1Scope of Delivery

Before you begin with the initial operation, please check if all accessories are in-

cluded in the box.

¾INSYS Modem 336 4.1, INSYS Modem 56k 4.1, or INSYS Modem 56k 4.1 UL

¾2 phone cords (TAE-N at RJ12 and RJ12 at RJ12), not for version UL.

¾PC connection cable 9/9-pin (RS232 cable)

¾User Guide

In case the content is not complete please contact your supplier. Please also check

the modem for shipping damage. Please also refer to your supplier if damage ex-

ists.

Please keep the packaging material for possible future dispatch or storage.

2General

The INSYS Modem 336/56k 4.1 (UL) is suitable for the analogue phone network. It

has a very compact design and very robust plastic housing. The modem supports

the following functions, which are described in detail in the following:

¾Establishing a data connection

¾Automatic call

¾Alarm inputs and outputs for SMS dispatch and to establish an alarm data

connection

¾Pulse input to send up to 10 SMS messages

¾Fax dispatch at alarm release

¾Local or remote configuration

¾Usage in 87 countries

¾Auto answer

¾Data flow control

¾Data compression

¾Error correction

¾Idle connection control

¾Flash update

¾Security callback

July 06 7

Notes Regarding the Use of the Manual INSYS Modem 336/56k 4.1 (UL)

3Notes Regarding the Use of the Manual

¾This manual uses the symbol for especially important notes. Further notes

will be marked accordingly.

¾All factory settings are marked “default”.

Example (Chap. 5.7.3): Enter old password (default: QWERTY)

¾In Chapters 4 to 6 the description consists of two columns. Individual func-

tions are described on the left side. The according AT commands and the mo-

dem responses can be found in the right column.

Function description AT command

Example (Chap. 5.2.7):

After the hardware reset, load the user profile 1 ATZ1

¾All AT commands start with the letters AT and end with a “Return” (Carriage

Return - CR). AT commands can be entered in capital or small letters. The

command is evaluated as soon as the modem received a return.

¾In the following, the used syntax is explained:

cATDT AT command (font: Courier, bold)

d<Term> Input of a parameter (font: Courier, bold)

e[Term] Input of an optional parameter (font: Courier, bold)

fTerm Response from the modem (font: italic)

Examples:

cATDT<n> Dialing the phone number <n>

ATDT1234 Dialing the phone number 1234

d+eAT+MS=<Modulation>, [Automode] Select modulation type

AT+MS=V92 Select modulation type

V.92

AT+MS=V92,1 Select modulation type

V.92 with automatic

adjustment

fConnect Connection to the remote terminal has been

established.

> Input prompt during the remote configuration.

8July 06

INSYS Modem 336/56k 4.1 (UL) Description

4Description

4.1 Front panel

The INSYS Modem 336/56k 4.1 (UL) has four LED’s to indicate the operating state.

Name Color LED off LED on

Power Green No supply voltage Supply voltage available

(Off Hook)

Yellow Modem is offline Modem is hooked to the phone line

(online)

DCD

(Data Carrier Detect)

Yellow No connection is estab-

lished

The connection to the remote terminal

is established (Carrier detected)

RX/TX

(Receive / Transmit)

Green No data exchange Date is exchanged via the modem

4.2 Top

Terminal Meaning

1 GND Ground

2 X1 Reserved

3 10 ... 60VDC Power supply 10V - 60V DC

4 GND Ground

5 GND Ground

6 Reset Reset input

7 GND Ground

8 Input 1 Alarm input 1

9 Input 2 Alarm input 2

GND

Reset

GND

Input 1

Input 2

GND

10...60 VDC

Power

supply IN 1 IN

Ext.

Reset 2

10 GND Ground

July 06 9

Description INSYS Modem 336/56k 4.1 (UL)

4.3 Bottom

Terminal Meaning

11 OUT1NC Output 1 normally closed

12 OUT1 Output 1

13 OUT1NO Output 1 normally open

14 OUT2NC Output 2 normally closed

15 OUT2 Output 2

16 OUT2NO Output 2 normally open

17 b2 Looped-through telephone connection

18 b1 Phone line to network provider

19 a1 Phone line to network provider

OUT 1-NC

OUT 1

OUT 2-NC

OUT 2

OUT 2-NO

OUT 1-NO

Line

20 a2 Looped-through telephone connection

a1 and b1 are the incoming phone lines (e.g. outside line or private branch ex-

change).

a2 and b2 are used to connect a phone in series. In idle state, they are connected

to a1 and b1 via a loop current connector. a2 and b2 are disconnected as soon as

the modem occupies the line.

For the INSYS Modem 56k 4.1 UL, the following applies:

Attention!

All devices which are connected to a1, b1, a2 and b2, must comply with the re-

quirements of UL 60950-1, Section 6. The used phone cords must have the type

AWG 26.

4.4 User Profile

The modem offers a choice of profiles:

¾Default factory setting:

The default factory settings enable you to achieve a fixed

defined basic state of the modem. Starting with this “ba-

sis”, you can customize the modem according to your re-

quirements.

¾User profiles 0 and 1:

You can save configurations in the user profile, which may be

re-used for certain purposes.

A part of the S registry is saved in each profile. In the descrip-

tion, the affected registries are marked with an “*” in the S

registry.

10 July 06

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Módem de INSYS

INSYS

INSYS Pocket ISDN Manual de usuario

INSYS

INSYS 56k Small INT 2.0 Manual de usuario

INSYS

INSYS 56k Small INT 2.0 Instrucciones de montaje

INSYS

INSYS 56k small EU 2.1 Manual de usuario

INSYS

INSYS GSM 4.3 I4 Manual de usuario

INSYS

INSYS MoRoS Manual de usuario

INSYS

INSYS MoRoS Manual de usuario

INSYS

INSYS i-modul 336 LL Manual de usuario

INSYS

INSYS GSM 4.3 easy Manual de usuario

INSYS

INSYS MoRoS Manual de usuario

INSYS

INSYS ADSL 1.1 Manual de usuario

INSYS

INSYS Modem 336 LL 2D/4D 5.x Originate / Answer Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario