Insize ISM-DLC120 Manual de usuario

OPERATION MANUAL

ISM-DLC120

LCD Microscope

Manual

.ⅠThe description of digital LCD microscope……………………2

. The installation of digital LCD microscope……………………4Ⅱ

. The Application of digital LCD microscope……………………5Ⅲ

.ⅣThe maintenance of digital LCD microscope…………………14

.ⅠThe description of digital LCD microscope

1.1 Produce sketch figure

Fig.1-1 ISM-DLC120

1. Base 2. Focus adjusting hand wheel 3. Continual zooming 4. LED Ring lamp

5. Operation button layout 6. The liquid crystal display screen

The buttons on the operation button layout may be increased or decreased as

different function model.

1.2 The description of digital LCD microscope

The product is provided with an innovated concept, integrating scientifically the

LCD and the microscope. Along with the development in digital integration and the

popularization of the digital products, such a Digital LCD Microscope with LCD will be

used in the more extensive fields.

The digital LCD microscope is featured as comfortable in observation, simple in

operation, true in color and sharp in image, minimizing obviously the vision pressure,

reducing physiological reactions such as dizzy and disgusted, more suitable for long

hours microscopic operation. Therefore, it finds its extensive applications in the

microelectronics, the production, education and research and development in

instruments/meters, jewelry/ornaments, living creature, agriculture and forestry,

material, public security criminal department and medical treatment, etc.

1.3 Mainframe technical parameters:

Continual zooming ratio 1:6.5(0.7X-4.5X)

Total magnification 18.7X-120X(4.7X-240X can be obtained with

varied accessories)

Digital amplification 8.4 inch TFT LCD (display screen resolution

800X600 pixels)

Display screen 5.0 MEGA pixels

CMOS sensor 92mm(46mm-243mm can be obtained with varied

accessories)

Working distance Φ8.9mm-Φ1.3mm(10mm-30mm can be obtained

with varied accessories)

Size of field visual Transverse axis continual magnification change

Zooming mode 100-240V/50-60Hz the working

powerofthemainframe:12VDC3A

AC adapter 100240V/5060Hztheworkingpowerofthemainframe

:12VDC3A

Auxiliary objective lens Standardconfigurationforauxiliaryobjectivelensis1.

0auxiliaryobjectivelens.Optionalauxiliaryobjectivel

ensesareavailablewith0.5,2.0

Illumination LED ring light.

. The installation of digital LCD microscopeⅡ

2.1 Installation

The ISM-DLC120 host and its support are disassembled for packaging.

Please open carefully the packing box and take out the instrument and

accessories(for detail, refer to the packing list). Then, connect the dove-tail groove at

the rear base of the machine with that at the upright column prior to the next step

operation.

The dove-tail groove on trestle table The dove-tail groove on mainframe Connect the dove-tail groove together

2.2 Attention

During installation, it is not allowed to touch the surface of the optical parts

and the surface of LCD screen directly with hand. The image quality may be

affected if the optical kits are stained with figure print or greasy stain. As to the

dirt on the surface of optical kits and LCD screen, please carry out treatment

according to maintenance of instrument introduced.

2.3 Preset adjustment

Select the operation distance of the machine by

rotating the focusing hand wheels. The tightness of

focusing hand wheels may be adjusted through

left/right focusing hand wheels by hands in inverse

direction. The focusing resistance is rather strong if

it is too tight while the machine may easily drop if

it is too loose. The users may adjust by themselves

according to the practical requirements.

. TheⅢApplication of digital LCD microscope

3.1 Turning on

After installation, connect the DC output to the PWR in port of the main system,

and then connect the AC power adapter in accordance with the requirements.

Turn on the master power switch. LED ring lamp will light, mainframe enter the

system, the screen show “WELCOME” .

The power of the adaptor:

AC100-240V 50 Hz /60Hz

The mainframe working power:

DC12V 3A

The light source adopts LED ring lamp, divided

into the LED circular indicator with adjustable

brightness and the multiple function LED circular

indicator controllable at four zones. The lower

light source is optional on requirements to facilitate

observation of different objects. The lower light

source is supplied by the PWR out at the rear of

the machine by connecting the PWR out of the

machine and the input port at the upright column

with a connection line.

Rotate the knob for continuous variable power

to adjust the optical variable magnification for the

microscopic image on the screen. (18.7X- 120 X)

3.2 Operation buttons and function

1 2 3 4 5 6 7 8 9

1. Power on/off 2. Increases or decrease the brightness of lamp 3. Light switch

respectively to control the four-region on or off 4. Self-definition linear converting

5. Linear color converting 6. Menu / confirm 7. Real time view / playback

8. Screen data display 9. Take pictures or take video

3.3 Data show on the LCD screen

Shown on the upper left corner is the quantity of photos to be taken available at

present or the video recording time (with 143 indicating 143 photos available to be

taken at the present setup mode; 50:24 indicating the time for video recording at

the present setup mode as 50min 24sec).

Shown on the upper right corner is the mode of photo taken or the

mode of video recording.

Shown on the lower left corner is the pixels of photos taken ( 2048×1536

indicating the pixels for photo taken at the present setup mode as 2048×1536;

320×240 indicating the pixels for video recording at the present setup mode as

320×240).

“C” shown on the lower right corner means that SD card is inserted in the machine.

3.4 The illumination control of the mainframe

The brightness of LED lamp may be increased or decreased with the help

of and . is respectively used to turn on/off for the corresponding

four corners of LED indicator.

If the light throw back from the object is too sharp, user can install a ground

glass on the LED ring lamp. It can improve the image quality. ( This ground glass

need to order )

3.5 Self-definition graphics

may be used to select self-definition graphics, including the cross line,

coordinates, lattice, carrying out simple locating and measurement. may be used

to select among colors of the self definition graphics, facilitating the clear indication

under different color materials.

3.6 How to measure

On the micro-ruler is calibrated with precise graduations of three kinds, i.e. 0.1mm,

0.01mm and 0.05mm respectively. Prior to the measurement of the object, select

firstly the coordinate or lattice for the self-definition graph. Then, select a certain

graduation of micro-ruler under the digital LCD microscope. After having clear

focusing, estimate the separation of the coordinate or lattices by comparing the

separation of coordinate or lattice with the distance of the standard graduation.

Under the condition not to change the power, observe the object inspected. After

having clear focusing, user can estimate the length or size of area for the object

observed with the separation of the coordinate or lattice. (This micro-ruler need to

order)

Example:

Select the standard graduation of 0.05mm under

a given power and move the micro-ruler after

having clear focusing so that the coordinate

corresponds with the micro-ruler. The standard

ruler of every 12 graduations correspond to 19

graduations of the coordinate ruler, then, each

graduation of the coordinate ruler is about 0.03mm

(12 0.05/19 ). In this case, user can carry out the

measurement for the object observed under

microscope according the distance of coordinate

ruler (requiring re-calibration of the separation of

coordinate ruler each time for a changed power).

3.7 Selection of function menu

With the help of the function menu, it is available to carry out the setting

for the whole system. It is available to select the following functions through

right/left key:

Use up/down key to choice each item, press

at last.

A. Photo taken mode

B. Image Setting

C. Image Size

D. Date and time

E. TV Out

F. Frequency

G. Choice menu language.

A. Photo taken mode

It is available to select single photo or video shooting.

Select single photo at the photo taken mode menu and

press the photo taking button, the microscope will take

a photo. At the photo taking mode menu and select the

video 320×240, press the photo taking button to start

AVI video recording. Press the photo taking button

once more to stop the AVI video recording.

B. Image Setting

Choice auto or exposure time item, exposure time

can be set up between-1.5s ~ +1.5s.

C. Image Size

Selection of different pixel may set up the photo

size at single photo shooting mode.

D. Date and time

It is available to set up the day, month, year, hour,

minute and second. The up/down, right/left and center

button may be used to set up the current date and

time.Exit from the setting after confirming the date and

the time. The time record on/off: after selecting “Time

record On” and confirm, the present date and time will

be indicated on the lower right corner of the photo.

Select “Time record OFF” to turn off the time recording

on the photo taken.

Tabla de contenidos

Otros manuales de Microscopio de insize

insize

insize ISM-DL301 Manual de usuario

insize

insize ISM-M1000 Manual de usuario

insize

insize ISM-WM200 Manual de usuario

insize

insize ISM-ZS30 Manual de usuario

insize

insize ISM-PM100 Manual de usuario

insize

insize ISD-A100 Manual de usuario

insize

insize ISM-ZS50 Manual de usuario

insize

insize ISM-DL120 Manual de usuario

insize

insize ISM-WF200 Manual de usuario

Manuales populares de Microscopio de otras marcas

Thermo Scientific

Thermo Scientific Nicolet iN10 Guía

National

National DC3-163 Manual de usuario

KERN Optics

KERN Optics OPE-1 Manual de usuario

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manual de usuario

Prior

Prior Lux POL Manual de usuario

Opitec

Opitec Smartscoop 115615 Manual de usuario

KERN

KERN OPO-1 Manual de usuario

Topcon

Topcon SP-1P Manual de usuario

Motic

Motic PA43 Manual de usuario

Leica

Leica DVM5000 Guía del usuario

MshOt

MshOt MZ62 Manual de usuario

KERN Optics

KERN Optics OZR-5 Manual de usuario

VWR

VWR VisiScope 384 Series Manual de usuario

Nikon

Nikon ECLIPSE E200 POL Manual de usuario

Leica

Leica DI C800 Manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

Olympus

Olympus SZ61 Manual de usuario

insize ISM-DLC120 Manual de usuario

Manuales populares de Microscopio de otras marcas