Inrevium TB-7Z-IAE Instrucciones de uso

TB-7Z-IAE Hardware User Manual

Rev.

1.0

TB-7Z-IAE

Hardware User Manual

Rev.1.05

No reproduction or republication of part or the whole of the contents of this document is strictly

prohibited.

The company name and the product name described in this document is a trademark or a

registered trademark of each company.

Tokyo Electron Device Limited assumes no responsibility or liability for any damages, including,

but not limited to, any special, incidental, or consequential damages arising out of any error in

publication or the use of this document.

The content of this document may be changed without prior notice.

TB-7Z-IAE Hardware User Manual

Rev.

1.0

Revision History:

Version Date Description Publisher

Rev.1.00 2015/04/22 Initial Version Kiguchi

Rev.1.04 2015/10/06 Update for TB-7Z-IAE Rev3

Added information : 3. Feature

Updated information : 7. Main Specification

Added information : 8. Board Specification

Added information : 10.2. Power supply structure

Updated information : 10.3. Clock structure

Added information: 10.4. Board status LED

Added information: 10.5.6. PS_POR_B_MR, PS_SRST

Added information: 10.6. Fixing screw hole

Added information: 10.8. microSD card socket (CN902)

Added information: 10.12. QSPI Flash

Added information: 10.13. F-RAM

Added information: 10.14. RTC

Kiguchi

Rev.1.05 2015/12/03 Updated information : 10.5.3. I/O voltage selection

jumper of USER_IOP/N (J101)

Added information : 10.5.9. B2B connector trace length

list

Added information : 10.5.10.Zynq, USB - B2B Connector

schematic

Added information : 10.8. Tested microSD card

Updated information : 11. Boot Mode Setting (J303/J304)

Updated information : 12. JTAG Mode Setting (J305)

Kiguchi

TB-7Z-IAE Hardware User Manual

Rev.

1.0

Table of Contents

1. Related documents:..................................................................................................................... 9

2. Overview...................................................................................................................................... 9

3. Feature ........................................................................................................................................ 9

4. Glossary of Terms...................................................................................................................... 10

5. Block Diagram............................................................................................................................11

6. External View of TB-7Z-IAE....................................................................................................... 12

7. Main Specification ..................................................................................................................... 13

8. Board Specification.................................................................................................................... 14

9. Address Map ............................................................................................................................. 14

10. Description of Components....................................................................................................... 16

10.1. Zynq...................................................................................................................................... 16

10.1.1. Heat sink (optional)........................................................................................................... 17

10.1.2. References ....................................................................................................................... 18

10.2. Power supply structure......................................................................................................... 19

10.3. Clock structure...................................................................................................................... 21

10.4. Board status LED (LED1/LED201)....................................................................................... 22

10.5. B2B connector (CN901) ....................................................................................................... 23

10.5.1. Input power source........................................................................................................... 28

10.5.2. USER_IOP00~23, USER_ION00~23............................................................................... 29

10.5.3. I/O voltage selection jumper of USER_IOP/N (J101)....................................................... 29

10.5.4. USER_GIO0~11 ............................................................................................................... 30

10.5.5. USER_MIO22, 23, 24, 25, 26, 27, 46, 47, 48, 49............................................................. 31

10.5.6. PS_POR_B_MR, PS_SRST............................................................................................. 32

10.5.7. USB_DP, USB_DM, USB_CPEN, USB_VBUS, USB_ID................................................. 33

10.5.8. +3.3VD Output.................................................................................................................. 34

10.5.9. B2B connector trace length list......................................................................................... 34

10.5.10. Zynq, USB - B2B Connector schematic........................................................................ 35

10.6. Fixing screw hole.................................................................................................................. 36

10.7. Gigabit Ethernet（CN1002）............................................................................................... 38

10.8. microSD card socket (CN902).............................................................................................. 43

10.9. JTAG connector (CN201) ..................................................................................................... 45

10.10. User LED (LED301/LED302/LED303) ................................................................................. 46

10.11. DDR3 SDRAM...................................................................................................................... 47

10.12. QSPI Flash ........................................................................................................................... 49

10.13. F-RAM .................................................................................................................................. 50

10.14. RTC ...................................................................................................................................... 52

11. Boot Mode Setting (J303/J304)................................................................................................. 54

12. JTAG Mode Setting (J305)........................................................................................................ 55

13. Default Factory Setting.............................................................................................................. 57

TB-7Z-IAE Hardware User Manual

Rev.

1.0

List of Figures

Figure 5-1TB-7Z-IAE block diagram...........................................................................................11

Figure 6-1Component side ........................................................................................................ 12

Figure 6-2 Solder side.................................................................................................................... 12

Figure 8-1Board dimensions..................................................................................................... 14

Figure 9-1System address map ................................................................................................ 15

Figure 10-1Heat sink .................................................................................................................. 17

Figure 10-2Power supply structure .......................................................................................... 19

Figure 10-3Recommended +5V supply voltage timing......................................................... 20

Figure 10-4Clock structure........................................................................................................ 21

Figure 10-5Status LEDs ............................................................................................................. 22

Figure 10-6B2B connector connecting structure.................................................................... 23

Figure 10-7B2B connector......................................................................................................... 24

Figure 10-8Power supply structure .......................................................................................... 28

Figure 10-92.5V Mode Setting ................................................................................................... 29

Figure 10-10PS_POR_B_MR timing........................................................................................ 32

Figure 10-11Example of user board connection ..................................................................... 33

Figure 10-12TB-7Z-IAE fixing screw hole................................................................................. 36

Figure 10-13 Connection between a screw hole and the ground.............................................. 37

Figure 10-14RJ45 connector ..................................................................................................... 38

Figure 10-15Gigabit Ethernet peripherals................................................................................ 40

Figure 10-16microSD card socket............................................................................................. 43

Figure 10-17Method to insert/remove the microSD card........................................................ 44

Figure 10-18JTAG connector..................................................................................................... 45

Figure 10-19JTAG connector pin .............................................................................................. 45

Figure 10-20User LEDs .............................................................................................................. 46

Figure 10-21DDR3 SDRAM ........................................................................................................ 47

Figure 10-22DDR3 SDRAM connections.................................................................................. 48

Figure 10-23QSPI Flash ............................................................................................................. 49

Figure 10-24F-RAM..................................................................................................................... 50

Figure 10-25RTC......................................................................................................................... 52

Figure 10-26RTC battery connection........................................................................................ 53

Figure 11-1JTAG Boot setting ................................................................................................... 54

Figure 11-1SD Card Boot setting .............................................................................................. 54

Figure 11-1QSPI Boot setting.................................................................................................... 54

Figure 12-1 Cascade Mode Setting............................................................................................... 55

Figure 12-1 Independent Mode Setting........................................................................................ 55

Figure 12-2ARM 20-pin type JTAG reference circuit............................................................. 56

Figure 13-1Component side ...................................................................................................... 57

TB-7Z-IAE Hardware User Manual

Rev.

1.0

List of Tables

Table 7-1 Main specification............................................................................................................. 13

Table 10-1 Onboard device specification......................................................................................... 16

Table 10-2 Thermal resistance......................................................................................................... 17

Table 10-3 Zynq clock input ............................................................................................................. 21

Table 10-4 Board status LED........................................................................................................... 22

Table 10-5 B2B connector pin assignment ...................................................................................... 24

Table 10-6 I/O voltage setting of USER_IOP/ION............................................................................ 29

Table 10-7 Connectable PS I/O peripheral interface........................................................................ 31

Table 10-8 R-J45 connector pin assignment.................................................................................... 39

Table 10-9 Zynq –Ethernet PHY pin assignment............................................................................ 41

Table 10-10 Zynq –LED pin assignment......................................................................................... 46

Table 10-11 Zynq –F-RAM pin assginment..................................................................................... 51

Table 10-12 Zynq –RTC pin assignment......................................................................................... 53

Table 11-1 Boot mode setting........................................................................................................... 54

Table 12-1 JTAG mode setting......................................................................................................... 55

Table 13-1 Default setting ................................................................................................................ 57

TB-7Z-IAE Hardware User Manual

Rev.

1.0

Introduction

Thank you for purchasing the “TB-7Z-IAE”board. This user manual contains important information

when it is used in development and functional evaluation of the TB-7Z-IAE board. Before using the

product, be sure to carefully read this user manual and fully understand how to correctly use the product.

First read through this manual and then always keep it handy.

If the TB-7Z-IAE board is incorporated in other products, refer to the respective delivery specification

which contains definition of board specification, use conditions, guarantee conditions and others.

SAFETY PRECAUTIONS Be sure to observe these precautions

Observe the precautions listed below to prevent injuries to you or other personnel or damage to property.

Before using the product, read these safety precautions carefully to assure correct use.

These precautions contain serious safety instructions that must be observed.

After reading through this manual, be sure to always keep it handy.

The following conventions are used to indicate the possibility of injury/damage and classify precautions if

the product is handled incorrectly.

Indicates the high possibility of serious injury or death if the product is handled

incorrectly.

Indicates the possibility of serious injury or death if the product is handled

incorrectly.

Indicates the possibility of injury or physical damage in connection with houses or

household goods if the product is handled incorrectly.

The following graphical symbols are used to indicate and classify precautions in this manual.

(Examples)

Turn off the power switch.

Do not disassemble the product.

Do not attempt this.

Danger

Warning

Caution

TB-7Z-IAE Hardware User Manual

Rev.

1.0

In the event of a failure, disconnect the power supply.

If the product is used as is, a fire or electric shock may occur. Disconnect the power supply

immediately and contact our sales personnel for repair.

If an unpleasant smell or smoking occurs, disconnect the power supply.

If the product is used as is, a fire or electric shock may occur. Disconnect the power supply

immediately. After verifying that no smoking is observed, contact our sales personnel for

repair.

Do not disassemble, repair or modify the product.

Otherwise, a fire or electric shock may occur due to a short circuit or heat generation. For

inspection, modification or repair, contact our sales personnel.

Do not touch a cooling fan.

As a cooling fan rotates in high speed, do not put your hand close to it. Otherwise, it may

cause injury to persons. Never touch a rotating cooling fan.

Do not place the product on unstable locations.

Otherwise, it may drop or fall, resulting in injury to persons or failure.

If the product is dropped or damaged, do not use it as is.

Otherwise, a fire or electric shock may occur.

Do not touch the product with a metallic object.

Otherwise, a fire or electric shock may occur.

Do not place the product in dusty or humid locations or where water may

splash.

Otherwise, a fire or electric shock may occur.

Do not get the product wet or touch it with a wet hand.

Otherwise, the product may break down or it may cause a fire, smoking or electric shock.

Do not touch a connector on the product (gold-plated portion).

Otherwise, the surface of a connector may be contaminated with sweat or skin oil, resulting

in contact failure of a connector or it may cause a malfunction, fire or electric shock due to

static electricity.

Warning

TB-7Z-IAE Hardware User Manual

Rev.

1.0

Do not use or place the product in the following locations.

Humid and dusty locations

Airless locations such as closet or bookshelf

Locations which receive oily smoke or steam

Locations exposed to direct sunlight

Locations close to heating equipment

Closed inside of a car where the temperature becomes high

Staticky locations

Locations close to water or chemicals

Otherwise, a fire, electric shock, accident or deformation may occur due to a short circuit or heat

generation.

Do not place heavy things on the product.

Otherwise, the product may be damaged.

■Disclaimer

This product is an evaluation board intended for evaluation of Xilinx’s Zynq™-7000 All Programmable

SoC. Tokyo Electron Device Limited assumes no responsibility for any damages resulting from the use

of this product for purposes other than those stated.

Even if the product is used properly, Tokyo Electron Device Limited assumes no responsibility for any

damages caused by:

(1) Earthquake, thunder, natural disaster or fire resulting from the use beyond our responsibility, acts by

a third party or other accidents, the customer’s willful or accidental misuse or use under other

abnormal conditions.

(2) Secondary impact arising from use of this product or its unusable state (business interruption or

others)

(3) Use of this product against the instructions given in this manual.

(4) Malfunctions due to connection to other devices.

Tokyo Electron Device Limited assumes no responsibility or liability for:

(1) Erasure or corruption of data arising from use of this product.

(2) Any consequences or other abnormalities arising from use of this product, or

(3) Damage of this product not due to our responsibility or failure due to modification

This product has been developed by assuming its use for research, testing or evaluation. It is not

authorized for use in any system or application that requires high reliability.

Repair of this product is carried out by replacing it on a chargeable basis, not repairing the faulty devices.

However, non-chargeable replacement is offered for initial failure if such notification is received within

two weeks after delivery of the product.

The specification of this product is subject to change without prior notice.

The product is subject to discontinuation without prior notice.

Caution

TB-7Z-IAE Hardware User Manual

Rev.

1.0

1. Related documents:

All documents relating to this board can be downloaded from our website.

Board Fixture:

Jumper short pin x 4

2. Overview

This product is an embedded module TB-7Z-IAE with Xilinx’s Zynq®-7000 All Programmable SoC

device (hereafter referred to as Zynq) for use of industrial networking products.

3. Feature

High performance embedded module consolidating Zynq and peripheral devices

Can support a wide variety of industrial network protocols by combining 2ch Gigabit Ethernet with

Zynq Programmable Logic (PL)

High performance 32bit 1,066Mbps DDR3 SDRAM operating up to 512MByte

16MByte Serial NOR Flash, Nonvolatile F-RAM™,

microSD™card socket for non-volatile data storage (microSD memory card is not included)

B2B connector with 70 configurable user IOs and USB 2.0

+5V single input power source having power supply sequence control function

Environmental tests

IEC 61000-4-2:2008

IEC 61000-4-3:2006+A1:2007+A2:2010

IEC 61000-4-4:2012

IEC 61000-4-5:2005

IEC 61000-4-6:2008

IEC 61000-4-8:2009

IEC 61000-4-11:2004

EN 55022:2010 (Class A)

EN 60950-1:2006 + A2:2013 Class III

Power Input Test

Temperature Rise Measurement

Impulse Test

1000Base-T Compliance Test

100Base-TX Compliance Test

RoHS Directive

TB-7Z-IAE Hardware User Manual

Rev.

1.0

4. Glossary of Terms

The following is a supplementary explanation about the terms used in this document.

B2B

Board-to-Board

User Board

Mother board designed by user which is equipped with TB-7Z-IAE

Zynq

Abbreviation of Zynq-7000 All Programmable SoC

Zynq PS

Abbreviation of Zynq Processing System

A hard macro block containing peripherals based on Zynq’s ARM® Cortex™-A9 MPCore™and

memory controller

Zynq PL

Abbreviation of Zynq Programmable Logic

FPGA fabric (LUT/FF/BRAM/IO/DSP/CMT and others)

The onboard Zynq is equivalent to Artix®-7 FPGA

Industrial Network

MECHATROLINK-III, CC-Link IE Field, EtherCAT® and others, inclusive of protocols that cannot

be realized by IEEE802.3 MAC

Tabla de contenidos

Otros manuales de Hardware de computadora de Inrevium

Inrevium

Inrevium TB-7V-2000T-LSI Instrucciones de uso

Inrevium

Inrevium TB-FMCL-USB30 Guía del usuario

Inrevium

Inrevium TB-7VX-690T-PCIEXP Instrucciones de uso

Inrevium

Inrevium TB-6V-LX760-LSI Instrucciones de uso

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario