Inovance WL432 Series Instrucciones de instalación
WL432 Series IoT Module
Hardware Guide
SSuuzzhhoouu IInnoovvaannccee TTeecchhnnoollooggyy CCoo..,, LLttdd..
Address: No.16, Youxiang Road, Yuexi Town, Wuzhong District,
Suzhou 215104, P.R. China
Website: http://www.inovance.com
‑2‑
TTaabbllee ooff CCoonntteennttss
Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ports............................................................... 5
Wireless Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installation Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Panel and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Typical Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
‑1‑
Preface
■ Introduction
This series of 4G smart hardware products can collect local device data including
running status and faults and interwork with Inovance’s Internet of Things (IoT) server
using 4G, Wi‑Fi, or Ethernet to enable remote commissioning and maintenance
functions. Users can access the web server to monitor status and analyze faults of
local devices. Featuring security, reliability, wide application, and strong stability, this
series of products are widely used for elevators, air compressors, and cranes.
Before using the product, read this user guide carefully to fully understand the
features of the product and ensure safe use. This user guide mainly describes
specifications, installation dimensions, ports, performance parameters, wiring, and
typical applications of this series of products.
■ Acquisition
The information in this user guide is subject to change without notice. You can
acquire the latest document version from your product distributor or Inovance's
website
http://www.inovance.com
.
■ Purchase Information
No. Model Product Code Platform Standard Configuration
1 WL432‑DB 01100136 Elevator/Air
compressor platform
1. 4G antenna (1.5 m)
2. No SIM card
3. RS485 cable (1 m)
2 WL432‑DE 01100123 General‑purpose
Uweb platform
1. 4G antenna (1.5 m)
2. SIM card
3 WL432‑DK 01100124 General‑purpose
Uweb platform
1. 4G antenna (1.5 m)
2. SIM card
■ Options
No. Name Code Specifications
1Wi‑Fi
antenna 15310001 2.4G sucker antenna ‑ 1.5 m ‑ RG316 white cable ‑
internal thread female pin
‑2‑
Safety Instructions
●The user name and password are used for authentication of remote device
operations. Therefore, save them securely and take necessary measures to
prevent account stealing. If the user name and password are stolen, great
losses may be caused.
●Before performing remote device operations, contact on‑site engineers to
ensure safety situations. Otherwise, great losses may be caused.
●This series of products are used for industrial control with remote data
exchange based on network technologies. Inovance has taken necessary
technical measures to ensure data security. However, network risks (such as
hacking) that Inovance cannot control may still exist, and Inovance is not
responsible for losses caused by such network risks.
‑3‑
Product Information
■ Model number
①① PPrroodduucctt ttyyppee
WL: WAN LINE external
network
communication
Internet product
③③ CCoommmmuunniiccaattiioonn
pprroodduucctt ttyyppee
3: 430 series
⑤⑤ OOppeerraattoorr aanndd nneettwwoorrkk ttyyppee
D: 12–24 VDC power supply
②② NNeettwwoorrkk ttyyppee
4: 4G, IoT
④④ PPrroodduucctt ccaatteeggoorryy
2: Overseas version
⑥⑥ PPoowweerr ssuuppppllyy ttyyppee
B: Elevator/Air compressor product
E: Remote LAN
K: Remote serial port
V: High‑end version
■ Functional Advantage
Functional
Advantage Description Model
Supported
Serial port data
collection
Connected to local device controllers using the
RS485 or RS232 port, this product obtains data from
local device controllers and uploads the data to the
server using 3G, 4G, Ethernet, or Wi‑Fi, or transmits
control commands delivered by the server to the
local device controllers.
WL432–DK
WL432–DB
Network port
data collection
Connected to LAN where the target device locates
using the LAN port, this product obtains data from
multiple local target devices and uploads the data to
the server using 3G, 4G, Ethernet, or Wi‑Fi, or
transmits control commands delivered by the server
to local device controllers.
WL432–DE
‑4‑
Functional
Advantage Description Model
Supported
Remote safety
commissioning
Based on SSL VPN, the safety of remote
commissioning, upgrade, and maintenance of target
devices is ensured.
WL432–DE
WL432–DK
Power failure
reporting
When an external power supply failure occurs, the
product automatically reports the power supply
failure event to a specified server and saves the event
in the memory.
All models
Other
advantages
●Transparent or encrypted wireless data
transmission is supported.
●Fault alarms are available.
●Industrial terminals are adopted to meet industrial
field application requirements.
●Remote upgrade and maintenance are supported.
●Using a special DIN rail, this product is small in
volume, simplifying integration for users.
All models
Applicable
industry
General WL432–DE
WL432–DK
Elevator and air compressor industry WL432–DB
Monitoring data
collection mode
The data is collected through macro instructions. WL432–DB
The data is collected through development tookit on
the platform.
WL432–DE
WL432–DK
‑5‑
Ports
Figure ‑1 Port locations
‑6‑
Port Terminal Description
7‑pin socket
24V The voltage range of DC power ports is 12 V to 24 V.
24V and 0V indicate the positive pole and negative
pole of the power supply, respectively. The
maximum input current is 0.8 A.
0V
485+ Standard RS485 serial
port
NNoottee::
●RS232 and RS485
cannot be used
together.
●For WL432‑DE, this
port is unavailable.
485‑ Standard RS485 serial
port
GND1
RS232 and RS485 share
the same reference
ground.
RXD
Standard RS232 serial
port for module data
receiving
TXD
Standard RS232 serial
port for module data
sending
4G antenna 4G Standard configuration, sucker antenna with
internal threads and inner male pin
Wi‑Fi antenna Wi‑Fi Optional, sucker antenna with internal threads and
inner female pin
SIM card slot /
Standard card dimension: 25 mm x 15 mm
Note: It is not recommended that users change SIM
cards. If users have such requirements, contact
Inovance’s technical engineers.
Reset key /
Short press (for 1s to 20s) to restore Wi‑Fi
parameters.
Long press (for over 20s) to restore factory settings.
Ethernet
WAN This port is used to connect external networks. 10 M
and 100 M networks are supported.
LAN This port is used to connect local devices. 10 M and
100 M networks are supported.
‑7‑
Port Terminal Description
LED indicators
Cloud service state indicator (green)
Data communication indicator (green)
Fault indicator (red)
4G or Wi‑Fi signal strength indicator (green)
The specific states indicated by the LED indicators are described as follows.
Steady Off Steady On Blinking
Cloud service
state indicator No network
●Device online
●Starting (within 33s)
●Button restoring
triggered
IP obtained, connecting
to the server
Data
communication
indicator No data
transceiving
●WL432‑DE/WL432‑DK: Blinking indicates normal
communication. The higher the communication
rate is, the quicker the blinking is.
●WL432‑DB: Steady on indicates normal
communication. Slow blinking indicates that a
password is used for the controller.
Fault indicator
Normal
●Starting (within 33s)
●Button restoring
triggered
●Disconnected from the
target device
●Network registering
●Poor 4G signal
Signal intensity
indicator
One bar: poor signal
Two bars: fair signal
Three bars: good signal
All off: no available signal, no network connection, or poor network
‑8‑
Wireless Indicators
Table –1 Wireless Indicators
Category Parameter Specifications
2.4G
WIFI
RF output power
(ERP/EIRP)
13–17 dBm
Frequency band
(MHz)
2412–2472 (center frequency)
Modulation DSSS, OFDM
GSM
RF output power
(ERP/EIRP)
GSM900: 33 dBm ± 2 dB
GSM1800: 30 dBm ± 2 dB
Frequency band
(MHz)
EGSM900: 880–915 MHz (TX), 925–960 MHz (RX)
DCS1800: 1710–1785 MHz (TX), 1805–1880 MHz (RX)
Modulation GMSK for GSM/GPRS, GMSK and 8PSK for EDGE
WCDMA
RF output power
(ERP/EIRP)
WCDMA: 24 dBm + 1/‑3 dB
Frequency band
(MHz)
WCDMA Band I: 1920‑1980 MHz (TX), 2110‑2170 MHz (RX)
WCDMA Band VIII: 880–915 MHz (TX), 925–960 MHz (RX)
Modulation WCDMA: QPSK
HSDPA: QPSK/16QAM
HSUPA: BPSK
LTE
RF output power
(ERP/EIRP)
LTE FDD: 23 dBm ± 2 dB
LTE TDD: 23 dBm ± 2 dB
Frequency band
(MHz)
FDD LTE Band 1: 1920‑1980 MHz (TX), 2110‑2170 MHz (RX)
FDD LTE Band 3: 1710‑1785 MHz (TX), 1805‑1880 MHz (RX)
FDD LTE Band 7: 2500‑2570 MHz (TX), 2620‑2690 MHz (RX)
FDD LTE Band 8: 880–915 MHz (TX), 925–960 MHz (RX)
FDD LTE Band 20: 832‑862 MHz (TX), 791‑821 MHz (RX)
FDD LTE Band 28: 703‑748 MHz (TX), 758‑803 MHz (RX)
FDD LTE Band 38: 2570‑2620 MHz (TX), 2570‑2620 MHz (RX)
FDD LTE Band 40: 2300‑2400 MHz (TX), 2300‑2400 MHz (RX)
Modulation QPSK/16QAM
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Unidad de control de Inovance
Inovance
Inovance GL10-PS2 Manual de usuario
Inovance
Inovance GL20-0016ETN Manual de usuario
Inovance
Inovance GR10-2PHE Manual de usuario
Inovance
Inovance GL10-0032ETN Manual de usuario
Inovance
Inovance GL20-4AD Manual de usuario
Inovance
Inovance IMC30-6G Series Manual de usuario
Inovance
Inovance PA 8000 LW Manual de usuario
Inovance
Inovance GR10-EC-6SW Manual de usuario
Inovance
Inovance GL20-0800END Manual de usuario
Inovance
Inovance AM600-4PT Manual de usuario
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
