Inova-bg IP Tau Manual de usuario

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Inova-bg Ltd.

IP Tau

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 2 of 16

Table of contents:

1. Main features........................................................................................................................................3

2. Start working with IP Tau ....................................................................................................................5

3. Homepage.............................................................................................................................................6

4. Configuration of the main parameters..................................................................................................7

4.1. General settings................................................................................................................................. 7

4.2. General IP settings............................................................................................................................ 8

4.3. Settings for the IP Servers................................................................................................................. 9

4.4. Settings for the digital inputs.......................................................................................................... 10

4.5. Saving the new configuration ......................................................................................................... 11

5. Username and password configuration...............................................................................................12

6. Utility..................................................................................................................................................13

7. Reboot.................................................................................................................................................14

8. Hardware reset....................................................................................................................................14

9. Hardware Connections .......................................................................................................................15

9.1. Hardware AC.................................................................................................................................. 15

9.2. Communicator/Dialer connection................................................................................................... 16

10. Windows Network configuration .......................................................................................................16

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 3 of 16

1. Main features

IP Tau is a communication device with the main purpose to transmit data from security panels and/or sensors

through IP based network. Using the advantages of communication technologies IP Tau provides the most

secure connection with monitoring center using various ways of back-up –2 main servers with a backup

server each.

Features:

Power supply 12VDC (8,5V to 16V)

Low power consumption

Protocols –Ademco ContactID, LARS

Network interface - IEEE 802.3 Ethernet,

Fully Compatible with 10/100/1000Base-

T Networks

Static or dynamic IP address compatible

with DHCP server

Capability to use one or two fully

independent IP servers

Verification with an unique ID code

HTML server for easy configuration and

status check, protected with an username

and a password

Capability to change the username and

password of the html server

Indication (4 LEDs) for:

oPower Supply

oLAN Status - Ethernet available

oLAN Activity –Network packets service

oServer LED –Established connection

with IP server/s –when using 1 server -

‘ON’ when connection is established.

When using 2 servers - ‘ON’ when

connection is established with both

servers, blinks if connection is

established with only one server , ‘OFF’

when connection isn’t established with

both servers

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 4 of 16

Encrypted connection with IP servers

Six digital inputs

Capability to use communicator as input - using “Ademco Contact ID” protocol

Configurable working mode for every digital input:

Normal Open

Normal Close

Check for AC voltage from 5V to 20V

Deactivated

Configurable parameters sent for events on each digital input to IP servers

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 5 of 16

2. Start working with IP Tau

The default IP address is 192.168.1.230. Make sure that your computer is in the same IP

subnet ( see Chapter 10. Windows Network configuration). To access the web server for

configuration use Internet Explorer ( Chrome, Firefox, Opera or any other web browser ) and

enter the IP Tau’s address - http://192.168.1.230/ ( or the new one if you already change it ).

Alternatively you could write http://iptau. If the device is accessible from that computer a

connection will be established and you will be prompt to enter username and password:

The default settings (which will be recovered after hardware reset ) are:

IP Address: 192.168.1.230

Username: root

Password: admin

If you enter the right credentials you will have access to the web page for configuration.

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 6 of 16

3. Homepage

On the homepage you can find main information about the device, current status of the

input voltage, last 5 messages received from the communicator and the current state of each

digital input. Through the menu you could select one of the following actions:

Home –Homepage

Device Config –Configuration of the main parameters

Utility –Test the connection to the servers

About –Contact information

Reboot –Restart the device

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 7 of 16

4. Configuration of the main parameters

4.1. General settings

Device Name –Enter the name of the device. This value is used only for user convenience –to

identify devices if you have more than one connected to one network. Maximum length –30

symbols.

Protocol –The device can use either Ademco Contact ID or LARS protocol. When using

Ademco Contact ID the device can receive data from communicator/dialer.

System (only on LARS protocol) –System number –must range 0 to 3.

Account Number –If working with Ademco Contact ID protocol –each of the four symbols

must be from 0 to 9 and/or from B to F.

If working with LARS protocol - The first 3 symbols must be from 0 to 7. The last symbol

must be from 0 to 9 or from A to J. In the monitoring software you can select how to use the

last symbol –as a digit or as a letter ( the digits 0 to 9 correspond to the letters A to J ).

Handshake Delay –According to Ademco Standard this is the delay between phone number

dialing(from the control panel) and the Handshake response(from the IP Tau). The default

value of 16(16x100ms = 1600ms) is working fine with most of the control panels.

Send message if DC is lower than 10V –Option that enables/disables generating of message

if the input voltage drops under 10V.

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 8 of 16

4.2. General IP settings

IP settings:

Obtain an IP address automatically via DHCP –IP address is received automatically from a

DHCP server in the current network. In this case easy way to access the web-server is by

entering the following address: http://iptau . If you select this mode but after reboot the device

cannot find a dhcp server for more than 10 seconds –IP Tau will load the last saved static

address.

Use the following IP address –IP address and network parameters are set to static

IP Address –IP address

Gateway –Gateway address.

Subnet Mask –Subnet mask of the IP network.

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 9 of 16

4.3. Settings for the IP Servers

The first group is corresponding to the first monitoring server. You must set the IP address

and the communication UDP port. You can activate the periodic test - Use Periodic Test on

Server 1 and set the period. If Use Backup Server option is enabled –a secondary IP Address

could be set. If the server on the primary address is not available –the device will try to send

the data to the backup address. This option is usefull if the server has two addresses from

different ISPs.

If you want to use the second server you must enable it - Enable Server 2 –and to set the

parameters in the same way as for Server1.

IP Tau User Manual v1.0

Inova-bg Ltd. 2016

Page 10 of 16

4.4. Settings for the digital inputs

According to which protocol is selected, in digital inputs settings different fields will

become active/deactive.

Digital inputs can be connected to PGM outputs of security panles or to any different kind

of sensors –panic-buttons, tampers and etc. In the Active State field you can set the working

mode of each input –normal close ( N.O. ) or normal open ( N.C. ) contact, check for AC on

this input ( Hardware AC ) or you can disable the input ( Not Used ). When digital input is

connected to PGM or dry contact, for ‘0’ state is accepted value of the resistance to ground less

than 300Ω and for active ‘1’ –value more than 1,4KΩ ( or open circuit ), the hysteresis is

between 300Ω and 1,4KΩ. If digital inputs are controlled by voltage for ‘0’ state is accepted

value of the voltage to ground less than 0,7V, and for active ‘1’ –value more than 2,6V, the

hysteresis is between 0,7V and 2,6V.

Type –Choose a message which will correspond to the change of state of this input

Tabla de contenidos

Otros manuales de Sistema de conferencias de Inova-bg

Inova-bg

Inova-bg Radina H3322 Manual de usuario

Inova-bg

Inova-bg GPRS TauL Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario