Inogeni SHARE2U Manual de usuario

Dual USB 2.0 Video to USB 3.0 Converter

User Guide v1.1

Thank you!

You have just acquired the finest and easiest to use tool for simultaneous capture of two streams of

uncompressed video with audio for your computer.

Easy, No Drivers, No Setup !

Versatile !

Compatible with all Apps !

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

SHARE2U CONVERTER

P/N SHARE2U

PRODUCT HIGHLIGHTS

EASY ! No drivers required

Capture from MJPEG and H264 USB 2.0 cameras, which are UVC-compliant

Capture HDMI feeds

Predefined Picture in Picture (PIP) views

Ideal for Video streaming and Videoconferencing

Compatible to all motherboards and chipsets

Powered via external power supply.

Scaler and Colorspace Conversion

Supports Windows, OSX and Linux

DirectShow, AVFoundation and V4L2 Compatible

Professional grade full-metal enclosure

OVERVIEW

The INOGENI SHARE2U Converter is the most easy and reliable tool for simultaneous capture of two

webcam and HDMI feeds into one single USB stream with audio for your PC for recording,

videoconferencing, lecture capture and streaming applications. No driver installation is necessary and it

will work on all motherboards and USB 3.0 chipsets. It features two USB inputs, one HDMI input, a line

level stereo analog input, a line level stereo analog output, an internal USB 3.0 hub with 2x USB 3.0

ports for expansion purposes and USB 3.0 connector for the host. It supports SD and HDTV video

formats, up to 1080p60, and most computer graphic formats. Compact in size and rugged, the

converter is a practical and an easy-to-use USB 3.0 capture solution. It is compatible with Windows,

OSX and Linux operating systems, and is UVC-compliant, so it will work with all DirectShow/V4L2 and

AVFoundation compatible software.

The converter supports 1080p resolutions up to 30 fps for USB and HDMI inputs. The line level stereo

analog audio input and output are two-channel LPCM.

SHARE2U comes with a USB 3.0 cable and its power supply.

Line level stereo audio support

Predefined Picture in Picture (PIP) views

Digital Fluid technology - Internal frame buffers maximize frame rate with any PC

Hardware-based color space and sampling conversion

Automatic scaling and frame rate conversion

Customizable video processing functions

Image controls: Brightness, contrast, saturation and hue settings

Supports multiple devices on the same PC.

Compatible with Windows, Mac OSX and Linux.

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

DEVICE CONNECTORS

CONNECTION DIAGRAM

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

SPECIFICATIONS

Video Input 1

Connector

1 x USB 2.0 camera (MJPEG or H264)

Video

Resolutions

Depends on the camera specifications

Video Input 2

Connector

1 x USB 2.0 camera (MJPEG or H264)

Video

Resolutions

Depends on the camera specifications

Connector

1 x HDMI

Video

Resolutions

1080p, 720p and 640x480

Frame Rates

Up to 30 Hz, all formats

Analog input

Analog stereo, line level, 3.5mm jack.

Analog output

Analog stereo, line level, 3.5mm jack.

HDCP Copy

protection

The device will not decrypt BD/DVD movies, satellite/cable receivers or other

encrypted sources.

Mixer Control

The Mixer feature can be controlled by the following interfaces:

HID

RS-232

Keypad

INOGENI REMOTE

LAN

Output

Connectors

1 x USB 3.0 to host

1 x HDMI output

Color Space

YCbCr (YUY2) 4:2:2 8-bit

Video Scaler

Automatic hardware based

Color Space

Conversion

Automatic hardware based

Sampling

Conversion

Automatic hardware based

Frame Rate

Conversion

Automatic hardware based

USB

expansion

2 x USB 3.0 ports for expansion purposes. The devices connected will appear to the

host.

Audio

Audio input

2-channel LPCM 48kHz audio from Line input or embedded in HDMI

Audio output

2-channel LPCM 48kHz audio Line level

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

Compatibility

Operating

System

NO driver installation necessary.

Windows 7 and above (32/64-bit)

OSX 10.10 and above

Linux (kernel v2.6.38 and above)

Android

Host

Requirements

USB 3.0 port

Minimum 4GB RAM

Intel Core i5

Graphic card with its own memory for on-screen rendering applications.

Motherboard

Compatible with all motherboards

Intel, Renesas, ASMedia, and Fresco Logic

Cameras

Supported

UVC-compliant cameras for USB inputs.

HDMI sources up to 1080p30.

Software

Compatibility

UVC-compliant

Runs with all software compatible to DirectShow, V4L2, QuickTime and

AVFoundation.

Dimensions

[W x L x H, cm]

18.5 x 11 x 3

Weight

[g]

466

Power

12V, 700mA (adapter included)

UPC Code

040232355523

Origin

Canada

Harmonized

Code

8517.62.000.900

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

SERIAL COMMUNICATION PROTOCOL

The device baud rate is 9600. This setting is configured using the appropriate firmware.

Terminal block pinout

As written on the back of the device, here is the pinout of the terminal block.

Pin 1: Receive

Pin 2: GND

Pin 3: Transmit

Pin 4: 5V supply (for INOGENI Remote)

Commands

If the commands are recognized, the “ACK” string will be sent.

If the commands are NOT recognized, the “NACK” string will be sent.

Input 1 is the USB input 1.

Input 2 is the USB input 1 OR HDMI input.

Commands sent to the serial interface must have the ‘<’ character at the beginning and ‘>’ character

at the end.

COMMAND

Command description

<S1>

Source 1, which comes from the USB input 1 connector

<S2>

Source 2, which comes from the USB input 1 or HDMI connector

<SS>

Side by Side View

<BS>

Big and Small View

<PPTR>

Picture in Picture at top right corner

<PPTL>

Picture in Picture at top left corner

<PPBR>

Picture in Picture at bottom right corner

<PPBL>

Picture in Picture at bottom left corner

<SW>

Swap View

<SS1>

Side by Side View where Input 1 is at the left side

<SS2>

Side by Side View where Input 2 is at the left side

<BS1>

Big and Small View where Input 1 is at the left side

<BS2>

Big and Small View where Input 2 is at the left side

<PPTR1>

Picture in Picture at top right corner where Input 1 is the background

<PPTR2>

Picture in Picture at top right corner where Input 2 is the background

<PPTL1>

Picture in Picture at top left corner where Input 1 is the background

<PPTL2>

Picture in Picture at top left corner where Input 2 is the background

<PPBR1>

Picture in Picture at bottom right corner where Input 1 is the background

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

<PPBR2>

Picture in Picture at bottom right corner where Input 2 is the background

<PPBL1>

Picture in Picture at bottom left corner where Input 1 is the background

<PPBL2>

Picture in Picture at bottom left corner where Input 2 is the background

<SAVE>

Save the current configuration onboard for future use

<RSTR>

Erase the current configuration onboard and return to default values

<BLK>

Black video

<SHW>

Show video

<RST>

Reset the device

<SWUSB>

Select USB source as input 2.

Select HDMI source as input 2.

<POLL>

Returns the current view of the device. In case PPTL1 mode is active, you will receive:

>> <POLL>

VIEW => S1

BLACK => disabled

ACK

<GET>

Return the firmware versions and video. Here is an example.

>> <GET>

StreamerApp => 1.4.1

DeviceID => 0

FX3 => N/A

FPGA => N/A

EDID => N/A

Input 1 => 1920x1080 MJPEG

Input 2 => Unlocked

Input 3 => Unlocked

VIEW => S1

BLACK => disabled

IP => 192.168.0.29

MAC => f8:dc:7a:5:76:8

ACK

INOGENI REMOTE

The INOGENI Remote needs to be connected to the terminal

block port in order to operate. Apply wiring accordingly. This

remote is sending serial commands to the SHARE2U device.

Make sure to set the DIP SW6 in order to apply power to the

remote before going further. See “DIP SWITCHES”section of this

document for more details.

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

LAN INTERFACE

The device supports a LAN interface. The device is DHCP compliant. Your DHCP server should assign an

IP address to the device automatically.

You can use any telnet application in order to communicate with the device using TCP. Make sure to use

the right IP address and port 50000.

You can use the commands by sending HTTP or TCP requests. For example, you can send an HTTP

request by sending it using any browser, for example, to 192.168.0.80:50000/COMMAND. If the command

is recognized, you will receive the ACK string.

Commands sent to the serial interface must have the ‘$’ character at the beginning and ‘$’ character

at the end.

COMMAND

Command description

$S1$

Source 1, which comes from the USB input 1 connector

$S2$

Source 2, which comes from the USB input 1 or HDMI connector

$SS$

Side by Side View

$BS$

Big and Small View

$PPTR$

Picture in Picture at top right corner

$PPTL$

Picture in Picture at top left corner

$PPBR$

Picture in Picture at bottom right corner

$PPBL$

Picture in Picture at bottom left corner

$SW$

Swap View

$SS1$

Side by Side View where Input 1 is at the left side

$SS2$

Side by Side View where Input 2 is at the left side

$BS1$

Big and Small View where Input 1 is at the left side

$BS2$

Big and Small View where Input 2 is at the left side

$PPTR1$

Picture in Picture at top right corner where Input 1 is the background

$PPTR2$

Picture in Picture at top right corner where Input 2 is the background

$PPTL1$

Picture in Picture at top left corner where Input 1 is the background

$PPTL2$

Picture in Picture at top left corner where Input 2 is the background

$PPBR1$

Picture in Picture at bottom right corner where Input 1 is the background

$PPBR2$

Picture in Picture at bottom right corner where Input 2 is the background

$PPBL1$

Picture in Picture at bottom left corner where Input 1 is the background

$PPBL2$

Picture in Picture at bottom left corner where Input 2 is the background

$SAVE$

Save the current configuration onboard for future use

$RSTR$

Erase the current configuration onboard and return to default values

$BLK$

Black video

$SHW$

Show video

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

$RST$

Reset the device

$POLL$

Returns the current view of the device. In case PPTL1 mode is active, you will receive:

VIEW => S1

BLACK => disabled

ACK

$GET$

Return the firmware versions and video resolutions of CAM and CONT inputs. Here is

an example.

StreamerApp => 1.4.1

DeviceID => 0

FX3 => N/A

FPGA => N/A

EDID => N/A

Input 1 => 1920x1080 MJPEG

Input 2 => Unlocked

Input 3 => Unlocked

VIEW => S1

BLACK => disabled

IP => 192.168.0.29

MAC => f8:dc:7a:5:76:8

ACK

DIP SWITCHES

The device have DIP switches below the device in order to force settings. Here are the functions of the DIP

switches.

SW1

For future use

SW2

For future use

SW3

OFF

Frame buffer frequency is set to 60Hz. (default)

Frame buffer frequency is set to 50Hz.

SW4

Reserved

SW5

Reserved

SW6

OFF

Disable 5V on terminal block. (default)

Enable 5V on terminal block.

This switch must be set in order to power up the connected remote.

INOGENI SHARE2U User Guide –V1.1 –January 31, 2018

INOGENI SOFTWARE SUITE

Eager to try it now? Simple as 1-2-3!

1- Connect the USB 3.0 cable to your computer

2- Connect any type of video source

3- Run your App or Download INOGENI Software Suite

You can use our INOGENI Software Suite in order to preview and record your video sources.

1. You can open the INOGENI Simple Capture application.

You will then have to use which video device, the resolution and the frame rate to use for the

preview/capture. Optional audio source can be selected.

2. To preview, you can click on the Play button and a window will appear with the video content.

You can click the Stop button to quit the preview mode or close the preview window.

3. If you want to capture to a file, you can click on the Record button and the application will ask you

where to save the file to.

Refresh the list of

detected devices

Play/Stop/Record

Selected video device

Selected resolution

Selected frame rate

Selected audio device

Otros manuales para SHARE2U

Tabla de contenidos

Otros manuales de Convertidor de medios de inogeni

inogeni

inogeni U-CAM Manual de usuario

inogeni

inogeni SHARE2 Manual de usuario

inogeni

inogeni SHARE2U Manual de usuario

inogeni

inogeni SHARE 2 Manual de usuario

inogeni

inogeni CAM100 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario