Innovative 9120 Manual de usuario

Model 9120 Double Horizontal

LCD Pole Arm

The following patents apply: 6,505, 988

Ergonomic mounting solutions for monitors and keyboards.

Installation Instructions

IOP-502577

Loop cable from monitor under

forearm. Pull handle down and tuck

cables betweem the plastic cable

management.

Use the cable clip to keep cables organized

and in tact around the pole.

Step 6 Cable Management

Your assembly and modiﬁcations are complete. If you need additional assistance

regarding this product or if you need to return this arm for any reason, please

contact our customer service department at 800.524.2744 to obtain a Return

Authorization Number (R/A).

Step 1 Arm Assembly

Be sure the mount is securely fastened to the surface before beginning.

Insert the pole of the arm assembly

into the mount. (Mounts will vary).

Use the 3/32” allen wrench, to tighten

the set screw on the mount. (Tighten

enough so the pole does not spin or

slip through the mount).

Align the tilter and VESA bracket with the hole

pattern on the back of the ﬂat panel monitor.

Use the four (4) M4-12 Philips Pan Head screws to

attach the plate to the back of the LCD monitor.

After securing the plate to the ﬂat panel

insert the tilter into the arm.

Use the 10-32” Philips Pan Head screw

and washer and fasten them to the hole in

the underside of the tilter shaft, locking the

monitor in place.

Tilt the monitor so it faces upward and

locate the set screw under the tilter. Insert

the 7/32” Allen wrench into set screw to

adjust the tilt friction.

* To tighten friction turn the wrench to the

right.

* To loosen, turn the wrench to the left.

Step 1A Arm Height Adjustment

To adjust the position of the extension(s),

loosen the set screw on the back of

the of the extension(s) then loosen the

thumbscrew attached to the collar under

the arm.

The extension(s) and collar(s) will easily

slide up and down the pole. Tighten

the thumbscrew on the collar and the set

screw on the back of the extension(s) to lock into place at the desired height.

Step 2 Attach Tilter/VESA bracket to the monitor

Step 3 Apple Bracket Assembly Continued

Step 4 Monitor to Arm Assembly

Step 5 Tilt Mechanism Adjustments

Set

Screw

Carefully remove the base from the ﬂat

panel monitor. (See your monitor’s User’s

Guide for instructions on how to do this.)

Attach the adapter plate (75MM or 100MM)

to the tilter mechanism, using four (4) #10-32

x 3/8” Flat Head Philips screws.

Otros manuales de Rack y soporte de Innovative

Innovative

Innovative EVO 5900 Manual de usuario

Innovative

Innovative HAT Collective WINSTON-E Triple Manual de usuario

Innovative

Innovative LCD Monitor Arm 9103 Manual de usuario

Innovative

Innovative Winston Lift Single Manual de usuario

Innovative

Innovative WINSTON-E Series Manual de usuario

Innovative

Innovative PTS-04-ISC250 Manual de usuario

Innovative

Innovative 8519 Manual de usuario

Innovative

Innovative 7000 Manual de usuario

Innovative

Innovative 9136 Manual de usuario

Innovative

Innovative 9035 CRT Guía de instalación

Innovative

Innovative Busby 8451 Manual de usuario

Innovative

Innovative 9047 Manual de usuario

Innovative

Innovative Ella Manual de usuario

Innovative

Innovative PTS-04-LANE Manual de usuario

Innovative

Innovative 8520 Manual de usuario

Innovative

Innovative Ella Manual de usuario

Innovative

Innovative PTS-04-M400/MX915 Manual de usuario

Innovative

Innovative STAXX Series Manual de usuario

Innovative

Innovative 8408 Manual de usuario

Innovative

Innovative 9049 Manual de usuario

Innovative

Innovative Winston Lift Single Manual de usuario

Innovative

Innovative UltraRack URPS Manual de usuario

Innovative

Innovative 7011 Manual de usuario

Innovative

Innovative STAXX Series Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario