Innovation First 106-2183 Manual de usuario
Rack Sliding Seat
Operation Instructions
Kit P/N: 106-2183
Patent(s) Pending
Page 2
Operation Instructions
1
3
2
Slowly
Seat
Support
Release
CAUTION: RACK MUST BE SECURED FROM TIPPING PRIOR TO USING RACK
SLIDING SEAT.
CAUTION: MAXIMUM WEIGHT CAPACITY FOR SEAT IS 350 LBS (158 KGS).
Step 1. Pull seat out completely.
Step 2. Pull the Release while holding the support from dropping.
Step 3. Slowly lower the support. Do not let it drop.
Operation Instructions
Page 3
Step 4. CAUTION: Ensure Red Slide is below the line.
Step 5. CAUTION: Check if latch is locked down. When locked, the seat will not slide
back in.
Line
Latch
Down
Warranty Statement
Innovation First, Inc. warrants our products against defects in material and workmanship for a
period of one (1) year from the date of purchase. Innovation First, Inc. liability shall be limited to
repairing or replacing, at our option, any defective product.
2183 OPI
Step 6. Reinsert into rack.
– Push red slide up.
– Fold Support up until Release holds it closed.
– Push Latch up.
– Slide seat in.
Operation Instructions
Otros manuales de Rack y soporte de Innovation First
Innovation First
Innovation First RETAIL-HP-AIO-016 Manual de usuario
Innovation First
Innovation First 104-6474 Manual de usuario
Innovation First
Innovation First 104-6241 Manual de usuario
Innovation First
Innovation First 104-5192 Manual de usuario
Innovation First
Innovation First 105-2670 Manual de usuario
Innovation First
Innovation First 111-5383 Manual de usuario
Innovation First
Innovation First 118-1619 Manual de usuario
Innovation First
Innovation First BRK-DELL-WS01 Manual de usuario
Innovation First
Innovation First RETAIL-AIO-017 Manual de usuario
