Select SEA LEVEL weather state unit option (mb hpa or inHg) sealevel setting exit.
When setting, the setting item will twinkling at a frequency of 1HZ.
Press “HISTORY”to confirm setting item and turn to next setting.
Press “+/°C/°F”once to ahead one step, hold more than 2 seconds to ahead by 8 steps/ second.
Press “-/RCC”once to back one step, hold more than 2 seconds to back by 8 steps/ second.
Without any effective handling more than 20 seconds, will exit setting automatically.
4.7/ WIDE SPEED SETTING
Hold “WIND”more than 2 into wind relative setting.
Setting order: select unittime of average wind speedexit.
When setting, the setting item will twinkling at a frequency of 1HZ.
Press “Wind” to confirm setting item and turn to next setting.
When setting unite, press “+/°C/°F ”or“-/RCC” to select m/s、Km/h、mph、knots
When in time setting of average wind speed, press “+/°C/°F”once to ahead one step, hold more than 2 seconds to ahead by 8 steps/ second.
When in time setting of average wind speed, press “-/RCC”once to back one step, hold more than 2 seconds to back by 8 steps/ second.
Without any effective handling more than 20 seconds, will exit setting automatically.
4.8/ RAINFALLSETTING
Hold “RAINFALL” more than 2 seconds into rainfall setting.
When setting, the setting item will twinkling at a frequency of 1HZ.
When in unit setting, press “+/°C/°F”or“-/RCC” to select INCH, MM.
Press “RAINFALL” or without any effective handling more than 20 seconds, will exit setting automatically.
5/ FUNCTION AND EFFECT
5.1/ RF RECEIVING
When power on, it will automatically into RF receive for 3 minutes after temperature and humidity testing. 3 minutes later into RCC receiving.
In normal mode, press Channel more than 2 seconds to force clear all registration information of channels
If the registered CH temperature does not receive any effective signals from the same ID Code in 60 minutes, the CH temperature will display twinkling.
If the wind speed does not receive any effective signals from the same ID Code in 60 minutes, it will display twinkling.
If the rainfall does not receive any effective signals from the same ID Code in 60 minutes, it will display twinkling.
When the information of temperature / wind speed / rainfall lost, it will return to display after receive the signal again.
5.2/ RCC RECEIVING FUNCTIONS
Enter the RCC receiving conditions:
When change the battery or reset to enter RCC receiving.
Automatically receiving RCC at 2:03, 3:03, 4:03, and 5:03 everyday.
Press “RCC ” 2 seconds receive the RCC receiving comely.
RCC receiving time is 7 minutes.
Symbol of RCC receiving:
When into RCC receiving, the tower-like RCC symbol will twinkling at a 1HZ frequency.
When received signals successfully, RCC receiving symbol will display fully and exit receiving mode.
When successfully received signal, the sign of the RCC display quiescence and exit the receiving mode
When RCC receiving, there are no functions of other keys. Press "-/RCC" will exit receiving mode
If failed to receive present-day, time for receiving next day is 2:03 a.m..
