INNO V30 Manual de usuario
(Optical Multi Meter)
User’s manual
V0.06
Thank you for choosing V30 Optical Multi Meter produced by
INNO!
This manual is only subject to the users who have already
purchased V30 Optical Multi Meters. Copying any part of this
manual without any written permission by publisher is forbidden.
Chapter 1 Overview
③
④
⑥
⑦
⑨
⑧
⑩⑪
⑤
①②
1. Optical fiber connector
( standard FC )
2. LED lamp
5. Button for wavelength selection
(available under“ OPM ” function)
3. VFL interface （2.5mm UPP）
4.LCD 8. Test indicator for
7. Power on/off or function
selection button
9. Mini USB charger socket
10. RJ45 network test socket
11. RJ11 phone line test socket
6. Flicker on/off (available
under the functions of “ VFL ”
or “ LED ” )
Size：124×53×33 (L×W×H)
Weight:155g
network
cable connection system
Chapter 2 Parameters
Parameters
Optical Power
Meter(OPM)
Type of detector
InGaAs
Type of optical fiber
interface
2.5mm of ST/SC/FC
universal connectors
Calibrated wavelengths
850/1300/1310/1490/1550/1625nm
Measuring range
Accuracy
± 0.02dB
from +6 to -70dBm
Linearity ± 2%
Units
dBm、mW 、uW
Visual Fault
Locator
(VFL/ VLS)
Output power
1mW
Type of optical fiber
interface
5KM of single mode fiber(SMF)
Radiation safety class
Class 2
Wavelengths
650nm ± 20nm
Output modes
Continuous /2Hz flicker lasers
Battery reverse
protection function
Available
Network cable
/phone line
test
Type of interface
RJ45/RJ11
Applicable network /
phone lines
UTP CAT-5/CAT-5e
(2/4/6-core phone lines)
Max.test distance 1KM
Operating temperature from -10℃to +60℃
Storage temperature from -20℃to +70℃
Relative humidity ＜90% (non-condensing)
Chapter 3 Functions
3.1 power-on and power saving function:
Power saving function:
3.2 Function selections:
This instrument will shut off automatically after waiting but
without receiving any operation instruction for about 10 minutes.
If you want to disable this auto shut-off function and keep this
instrument working, please press and hold the “MODE” button
immediately when power on for about 2 seconds until “PERM”
appears on the bottom right screen of the LCD, meaning that the
power saving function has been canceled.
It defaults to be under “OPM” function when power-on. 4
Function selections:
It defaults to be under “OPM” function
when power-on.4 functions including
“OPM”,“VFL”,“LED”and“network
Power-on:
Quickly press “MODE” key to turn on the instrument.
Power-off:
Press and hold “MODE” key for 2 seconds or more until “OFF”
displays on the screen.
Note: This instrument will shut down
automatically without receiving any
operation instruction for 10 minutes.
PERM
cable
/phone line tester”will be switched in
loop mode.
-ons including “OPM”, “VFL”, “LED” and “network cable/phone
line tester” will be switched in loop mode.
functi
3.4 Visual Fault Locator (VFL)
3.5 LED lamp
3.3 Optical Power Meter (OPM)
You can switch the measuring
and the units of numeric display
include uW and dBm,which can
be switched via “U” button.
/1300/1310/1490/1550/1625nm
“OPM”.The calibrating wavelen-
You can select continuous
optical wavelengths by pressing
“T” button under the function of
gths of this instrument are 850
You can select continuous
mode or flicker laser mode with
2Hz of flicker frequency under
the function of “VFL”.
laser
light mode of LED or flicker
mode of SOS coding by
pressing “U” button under
the function of LED.
3.6 Null Function Description
Tighten the OPM dust cap.
“NULL”appears when "T"
button and "U" button are
pressed at the same time
in OPM model.
The “Network cable/ phone line test”(NET) function is used in
network generic wiring and for verifying the link on-off
condition of network including the sequence of testing cable
connection systems. Test will begin when this NET function is
enabled; the 8 indicators are used for indicating the sequence
of testing cable connection systems. When the network cable
or phone line is connected to this instrument and remote
model, 8 indicators will blink in turn.
3.7 Network cable/phone line test
Remote module
Company：INNO Instrument Inc.
Address：E-22F, 30, Songdomirae-ro, Yeonsu-gu,
Incheon21990, Republic of Korea
Tel: +82 32 837 5600
Fax: +82 32 837 5601
Email: [email protected]
Please contact with INNO customer engineer or access to the
following website for consultation:
Any calibration, maintenance or repair to this instrument
should be carried out by qualified maintenance staff.
www.innoinstrument.com
Otros manuales para V30
1
Tabla de contenidos
Otros manuales de Instrumento de medición de INNO
INNO
INNO A870 OTDR Manual de usuario
INNO
INNO 320 Manual de usuario
INNO
INNO 5G SMART Manual de usuario
INNO
INNO View 950M Manual de usuario
INNO
INNO View 950M Manual de usuario
INNO
INNO ANS729422722230010 Manual de usuario
INNO
INNO TCW-S1-UR2-230AC Manual de usuario
INNO
INNO DWA-S-M2RC0-24DC Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario