Infomark IML-C4300W Manual de usuario
MyHotspot
User Manual
(Draft version - 2015.04.01)
Model: IML-C4300W
INFOMARK
Contents
1. Getting Started........................................................................................................................................ 4
1.1) Your Device........................................................................................................................................... 4
1.2) Package Contents............................................................................................................................... 5
1.3) System Requirements....................................................................................................................... 6
1.4) Setting Up Service.............................................................................................................................. 6
2. Device Information ................................................................................................................................ 7
2.1) Introduction........................................................................................................................................... 7
2.2) How to use............................................................................................................................................ 7
2.3) LED ..........................................................................................................................................................10
3. Web Management ...............................................................................................................................12
3.1) How to Connect to Web Management Page......................................................................12
3.2) Web Management Page Menu..................................................................................................14
3.2.1) Home..................................................................................................................................................15
3.2.2) Connected Devices.......................................................................................................................16
3.2.3) Settings..............................................................................................................................................18
3.2.4) Notifications ....................................................................................................................................38
3.2.5) About..................................................................................................................................................39
3.2.6) Support..............................................................................................................................................40
4. Frequently Asked Questions............................................................................................................41
5. Technical Specification.......................................................................................................................42
5.1) Radio Frequency specification....................................................................................................42
5.2) Electrical and Mechanical specification..................................................................................42
6. Safety Information ...............................................................................................................................43
6.1) Important Notice ..............................................................................................................................43
6.2) Safety and Hazards..........................................................................................................................43
6.3) Proper Battery Use and Disposal ..............................................................................................44
6.4) For Your Safety..................................................................................................................................44
7. Regulatory Notice ................................................................................................................................45
8. Warranty Information .........................................................................................................................47
8.1) TBD.........................................................................................................................................................47
1. Getting Started
The following topics give you all the information you need to set up your device.
1.1) Your Device
1. Power button
2. Micro USB cable for charging external devices
3. Charger LED (indicates external charging status)
4. Micro USB port
5. LED indicators (Wi-Fi, Network, Power)
6. Reset button
7. Nano SIM Card Slot/Micro SD Card Slot
8. Battery
※"6, 7, 8" is under the back cover .
1.2) Package Contents
1. MyHotspot 2. Wall charger [5V/1A]
3. Micro USB cable 4. Quick Guide
※Failure to use approved accessories provided by manufacturer could result in poor
performance, electric shock, fire, injury or damage to MyHotspot or other property.
1.3) System Requirements
The following items are required to use your MyHotspot.
One or more WiFi enabled devices which support Wi-Fi (IEEE 802.11b/g/n)
Web browser. The following browsers are supported:
® (version 7.0 or higher)
oogle Chrome™ (version 2.0.172.28 or higher)
® (version 4.0 or higher)
If you will be connecting your device through USB:
or Mac OS® X (version 10.5 or higher)
SB 2.0 slot
1.4) Setting Up Service
1. Setting Up MyHotspot
-Remove the back cover.
-Insert the SIM card if not already installed.
-Install the battery.
-Install the back cover onto MyHotspot.
-Press Power button on the side of the MyHotspot for about three seconds to turn the
device on.
-Make a Wi-Fi connection from your PC or Smartphone to the device.
Default Wi-Fi SSID is "IML-C4300Wa- xxxxxx".
"xxxxxx" is the lower 6 Hex value of the Wi-Fi MAC Address.
Default Wi-Fi Key is "yyyyyyyy".
"yyyyyyyy" is the Serial number(8 Digit) of the MyHotspot.
2. Activate Your Device
-Power up your device
-Make a connection to Web management page (please refer to Section 3.3) How to
Connect to Web Management Page )
-Click 'StartActivation' on the Notification pop-up.
2. Device Information
2.1) Introduction
MyHotspot provide LTE service over Wi-Fi AP and up to 10 clients can connect at the same time.
※Main Wi-Fi support up to 9 clients at the same time. To use 10 clients, Guest Wi-Fi should be
enabled. Please check the instructions in "Wi-Fi basic settings" .
2.2) How to use
The operation / battery charging time
LTE MyHotspot can be charged over wall charger or Micro USB Cable suppler provided.
No
Description
Approximate Time
1
Full Charging time
(Power off)
Over Micro USB cable.
5h 18m
Over wall charger
5h 12m
2
Operation time
Battery is full charged
7h 45m
3
Stand by time
Power On and full charged battery
8h 20m
4
Hibernation
Hibernation Mode
1000h
※Above times may vary with the number of users, operating environment and signal
conditions.
Power
Power can be supplied through a USB cable or internal battery.
Power On/OFF
1. Power On
Push power button (more than 2 seconds) and release when PWR, Network LED is turned on
with Red color.
2. Power Off
Push power button (more than 8 seconds) and release when Network LED is Blinking with
Blue color.
Hibernation Mode
1. Wakeup
Push power button (more than 2 seconds) and release when Power LED turns Yellow,
Network LED turns Green color.
2. Hibernation Entry
Push power button (between 2~8 seconds) and release when Power LED is Blinking with
Yellow color.
※Wi-Fi and LTE Network cannot be used in Hibernation Mode.
Device Reset
If the device is unstable or responds erratically, push the Reset Button for 1 sec to reset the
device. Reset Button is located under the back cover. Remove the back cover to find the
Reset Button.
Device Factory Reset
Factory default settings can be restored when the device is turned on.
Push power button for 15 seconds and release when Network LED is blinking with Blue color.
Wi-Fi LED turns Red. The configuration settings of the device will be reset and restored to the
factory default values. After Factory Reset, device will perform power on reset and reboot.
Nano SIM
Nano SIM card is used for LTE service.
SIM Card slot is located under back cover. First remove back cover and then insert Nano SIM
Card. There are two card slots, upper slot is for micro SD card and the lower one for nano
SIM. Before inserting SIM Card, check the card orientation. Circuit side should face down.
Micro SD Card
You can use the storage function by installing a micro SD card. When you connect the device
to a PC via USB cable after you insert a micro SD card, it is recognized as a removable disk
on your PC.
You can also use the media server (DLNA) and file transfer server (FTP) functions by
downloading related programs and apps on your PC or Smartphone. Some popular Media
Streaming apps are BubbleUPnP for Android devices and Gizmoot for iOS devices. And some
popular apps for FTP include File Manager and AndFTP for both Android and iOS devices.
The micro SD Card Slot is located under back cover, first remove back cover and then insert
micro SD Card into the upper slot.
Before insert micro SD Card, check the orientation of the card.
2.3) LED
Status LED Information
MyHotspot support 4 status LED( Wi-Fi, Network, Battery, External changing )
1. Wi-Fi Status LED
2. Network Status LED
3. Battery Status LED
4. External charging status LED
Wi-Fi status
Wi-Fi status is shown on Wi-Fi LED.
Wi-Fi On with Wi-Fi clients
LTE Network : Green (Solid)
Wi-Fi On without Wi-Fi clients
LTE Network : Green (Blinking)
Wi-Fi Off
LED Off
Tabla de contenidos
