InFocus LP 225 Instrucciones de instalación

LP225 RS-232 Command Values

Communication Configuration

To control one of the above noted projectors from an RS-232 control system, connect the serial cable or a null modem cable and

the InFocus RS-232 Adapter (SP-CWRS232) and set the control system serial port settings to match the following communication

configuration*:

RS-232 Port Settings

Setting Value

Bits per second 19,200

Data bits 8

Parity None

Stop bits 1

Flow control None

Emulation VT100

RS-232 Connection for LP225

The RS-232/serial connection for these projectors is located on the PC side of the CableWizard II connection hub. Use the serial

cable (IFS part # 210-0107-xx) to connect the CableWizard II to the serial port of the computer source.

Note: CableWizard3(p/n SP-CW3) does not support RS-232. You must Use CableWizard II (p/n SP-CW2) and the InFocus

serial cable.

Command Format

All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can be a read request

(indicated by a "?") or a write request (indicated by 1 to 4 ASCII digits).

A read request example:

(AAA?) where

( starts the command

AAA denotes the command

? denotes the read request

) ends the command

A read command returns the range and the current setting, for example:

Read Command Examples

Function Command Response

Brightness (BRT?) (0-22, 10)

Volume (VOL?) (0-80, 0)

Lamp Hours (LMP?) (0-9999, 421)

A write request example:

(AAA####) where

( starts the command

AAA denotes the command

#### denotes the value to be written

(leading zeros not necessary)

) ends the command

Some commands have ranges, while others are absolute. If a number greater than the maximum range is received, it is

automatically set to the maximum number for that function. If a command is received that is not understood, a "?" is returned. With

absolute settings, "0" is off, 1-9999 is on. The one exception is the Power command, where 0 is off and 1 is on.

To assure the projector can process a command, wait 3 seconds before entering the next command.

Write Command Examples

Function Command Response

Brightness (BRT10) Sets the brightness

to 10

Freeze (FRZ1) or

(FRZ8888) Freezes the display

Power (PWR0) Turns power off

Power (PWR1) Turns power on

Error Conditions

Not all commands are supported for all projectors. If an unsupported command is issued, the command will be ignored. If a

command is received that is not understood, a ‘?’ character will be returned indicating the command was not understood.

Limitations

The CLI cannot respond to commands coming in at a high-rate. Therefore, a delay must occur between commands to ensure that

the command gets properly executed. To assure the projector can process a command, wait 3 seconds before entering the next

command.

Note: Specified commands and values apply to the LP225 with version 1.10 software or higher. The version number of the

software is the first number listed in the upper right corner of the on-screen menu. Command values for LP225s with earlier

software versions may vary. If your LP225 does not have version 1.10 software or higher, go to the Software/Downloads page to

download and upgrade the projector software.

For absolute command value ranges of 0 - 1, 0 = "Off" and 1-9999 = "On" unless otherwise noted.

Range

Data Source

(Computer) Video Source

Function Command

Min-Max, Initial Value Min-Max, Initial Value

Power (write only) ("PWR") N/A N/A

Brightness ("BRT") 0-32,16 0-32,16 or 14

Tint ("TNT") 0-32,16 0-32,16

Contrast ("CON") 0-32,16 0-32,18 or 16

ColorTemp ("TMP") N/A N/A

Saturation ("CLR") N/A 0-32,16

Optimize ("OPT") N/A N/A

VideoFmt ("VSU") N/A 0-6,0

Volume ("VOL") 0-80,40 0-80,40

Balance ("BAL") 0-31,16 0-31,16

Treble ("TRB") 0-14,7 0-14,7

Bass ("BAS") 0-14,7 0-14,7

Fade ("FAD") 0-31,16 0-31,16

Ambiance ("AMB") 0-37,19 0-37,19

Mute ("MTE") 0-1,0 0-1,0

Manual Tracking ("MTS") 0-63,32* N/A

Manual Sync ("MSS") 0-19,10* N/A

Horiz Position ("HPS") 0-63,32* N/A

Vertical Position ("VPS") 0-63,32* N/A

Auto Image ("AIM") 0-1,1 N/A

Resize ("ARZ") 0-1,1 0-1,1

Freeze ("FRZ") 0-1,0 0-1,0

Language ("LAN") 0-3,0 0-3,0

Ceiling ("CEL") 0-1,0 0-1,0

Rear Project ("REA") 0-1,0 0-1,0

Reset ("RST") 0-1,0 0-1,0

Auto Source ("ASC") 0-1,0 0-1,0

Default Source ("DSC") 0-1,0 0-1,0

Blank Screen ("BSC") 0-1,0 0-1,0

Menu Position ("MPS") 0-4,0 0-4,0

Standby Time ("SBT") N/A N/A

Display Messages ("DMG") N/A N/A

Display Startup Screen ("DSU") N/A N/A

Standby Mode ("STB") 0-1,0 0-1,0

Source ("SRC") 0-1,0

0 = computer

1 = video

0-1,0

0 = computer

1 = video

Bulb Clock (read only) ("LMP") 0-9999,0 0-9999,0

*Software dynamically changes range based on the signal received.

Tabla de contenidos

Otros manuales de Proyector de InFocus

InFocus

InFocus LiteShow II Manual de usuario

InFocus

InFocus IN124STA Manual de usuario

InFocus

InFocus IN36 Manual de usuario

InFocus

InFocus LP 420 Manual de usuario

InFocus

InFocus SP777 Manual de uso y cuidado

InFocus

InFocus LP755 Manual de usuario

InFocus

InFocus LP790 Manual de usuario

InFocus

InFocus Learn Big XS1 Manual de usuario

InFocus

InFocus IN5132c Manual de usuario

InFocus

InFocus LP 740TM Manual de referencia

InFocus

InFocus LP 820 Guía de configuración rápida

InFocus

InFocus LP790 Manual de usuario

InFocus

InFocus ScreenPlay 7205 Manual de usuario

InFocus

InFocus LASER PROJECTOR LP 540 Manual de usuario

InFocus

InFocus SP7205 Guía de inicio rápido

InFocus

InFocus LP 425 LiteMount Manual de usuario

InFocus

InFocus IN78 Manual de usuario

InFocus

InFocus in114ST Manual de usuario

InFocus

InFocus X8 Manual de usuario

InFocus

InFocus LP800 Manual de lista de piezas

InFocus

InFocus IN26 Manual de usuario

InFocus

InFocus LP 240 Manual de usuario

InFocus

InFocus in122 Manual de usuario

InFocus

InFocus IN3134a Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario