Influx Technology ReXgen Manual de usuario

www.influxtechnology.com

User Guide

ReXgen-Manual

ABOUT THIS MANUAL

This document provides a brief idea on the usage, safety precautions, installation procedures and operation of the

Influx ReXgen2. This document is intended for professional engineers as well as academic researchers, allowing them

to understand the concept of operating the device and to integrate this knowledge into systems with components of

other manufacturers.

DISCLAIMER

Translation of the original Product Manual ReXgen2.

Version

Date

Remarks

1.0

21-10-2020

First official version

1.1

02-02-2021

Minor Changes

1.2

20-04-2021

Added Certifications

Table 1: Version Details

The content of this document including all brands and trademarks and possibly protected by third-party rights are

subject without limitation to the terms of the valid trademark law and intellectual property rights of their respective

registered owner.

CONTACT ADDRESS

Influx Technology Ltd

Office 22, Building 03, Millbrook Proving Ground

Bedford, MK45 2JQ, United Kingdom

Telephone: +44 (0) 1525 842504,

Sales: sales@influxtechnology.com

Support: support@influxtechnology.com

www.influxtechnology.com

SAFETY INSTRUCTIONS

▪Always ensure that the device is installed, connected, and commissioned by a qualified professional by

following all safety norms.

▪Disconnect the device completely before handling it and disconnect any independently supplied output load

circuits.

▪Do not connect the housing to Ground externally. This will suspend the reverse voltage protection of the

power supply. Applying a reverse voltage in this case will destroy the supply circuits.

▪Provide all the device connectors with plugs and any protection caps required to ensure protection class

IP65.

▪Never immerse the device in water or other liquids.

▪The device must only be repaired by the manufacturer.

▪Keep substances that contain solvents away from the type label.

The following formatting and symbols will help you recognize the purpose of each paragraph:

Severe injury or death. Probability: possible

Slight or medium injury. Probability: possible

Property damage

•Important usage instructions/notes/limits.

Notes

DANGER

WARNING

CAUTION

ATTENTION!

 
 © 2020 Influx Technology | Version 1.2 
Table of Contents 
ABOUT THIS MANUAL..................................................................................................................................................... 2 
DISCLAIMER.................................................................................................................................................................... 2 
COPYRIGHT & LICENSE AGREEMENT .............................................................................................................................. 2 
CONTACT ADDRESS......................................................................................................................................................... 2 
SAFETY INSTRUCTIONS ................................................................................................................................................... 3 
OVERVIEW OF THE DEVICE .....................................................................................................................................6 
1 GENERAL INFORMATION ................................................................................................................................ 7 
1.1 DEVICE ELEMENTS................................................................................................................................... 7 
1.2 PRODUCT DRAWINGS ............................................................................................................................. 7 
1.3 TECHNICAL SPECIFICATION ..................................................................................................................... 8 
1.4 ELECTRICAL DATA.................................................................................................................................... 9 
1.5 INTENDED USE ........................................................................................................................................ 9 
1.6 LIABILITY & WARRANTY ........................................................................................................................ 10 
1.7 CONFORMITY ........................................................................................................................................ 10 
2 DEVICE KIT..................................................................................................................................................... 10 
2.1 HARDWARE........................................................................................................................................... 10 
2.2 SOFTWARE ............................................................................................................................................ 10 
3 SERVICE & SUPPORT ..................................................................................................................................... 11 
HARDWARE & FUNCTIONALITY............................................................................................................................. 11 
1 FUNCTIONS ................................................................................................................................................... 11 
1.1 RECORDING CAN/CAN FD DATA............................................................................................................ 11 
1.2 RECORDING LIN DATA........................................................................................................................... 11 
1.3 RECORDING GNSS DATA........................................................................................................................ 11 
1.4 RECORDING ACCELEROMETER & GYROSCOPE DATA ............................................................................ 11 
1.5 DIGITAL & ANALOG INPUT FUNCTIONS................................................................................................. 11 
2 HARDWARE................................................................................................................................................... 12 
2.1 INSTALLATION.......................................................................................................................................12 
2.2 ENCLOSURE........................................................................................................................................... 13 
2.3 CABLES .................................................................................................................................................. 13 
2.4 INDICATOR ELEMENTS –LED’S.............................................................................................................. 14 
2.5 ACCESSORIES.........................................................................................................................................15 
GETTING STARTED ................................................................................................................................................ 15 
1 CONNECTING THE DEVICE............................................................................................................................. 15 

 
 © 2020 Influx Technology | Version 1.2 
1.1 POWER.................................................................................................................................................. 15 
1.2 CAN / CAN FD........................................................................................................................................15 
1.3 ANALOG & DIGITAL INPUT .................................................................................................................... 16 
1.4 USB........................................................................................................................................................ 16 
2 SOFTWARE INSTALLATION............................................................................................................................ 16 
3 DRIVER INSTALLATION .................................................................................................................................. 18 
4 FIRMWARE UPDATE...................................................................................................................................... 19 
ANNEXURES .......................................................................................................................................................... 20 
1 DIGITAL INPUT FUNCTION ............................................................................................................................ 20 
2 CERTIFICATIONS............................................................................................................................................ 21 
FCC........................................................................................................................................................................ 21 
CE.......................................................................................................................................................................... 22 
ROHS..................................................................................................................................................................... 23 
3 CAN OVERVIEW............................................................................................................................................. 24 
 
 

1. OVERVIEW OF THE DEVICE

This chapter gives an overview of the device, its operating elements and functions as well as the

intended use of the device.

Along with the free, user-friendly configuration software, the standalone ReXgen logger comes with

the following advantages:

▪Extreme level of compactness –pocket size

▪Tolerable to harsh environments with IP65 rating

▪Secure data storage with an internal eMMC

▪Supports CAN, CAN FD & LIN buses

▪Supports CAN monitoring RAW CAN signals, SAE J1939

▪Sleep modes with wake up on CAN & wake up on movement

▪Most advanced trigger & filter conditions

▪In-built gyroscope & accelerometer modules

▪2 x digital & 2 analog inputs

▪Up to 18 Hz rate GNSS module

▪Micro USB 2.0 PC interface

▪Internal temperature sensor

▪CAN error logging

Available Models

Model

eMMC Storage

CAN/CAN FD

Analog I/P

Accelerometer & Gyroscope

GNSS

INF2110

8 GB

INF2111

16 GB

INF2112

32 GB

Yes

INF2113

32 GB

Yes

Yes (Dead Reckoning)

1.1 GENERAL INFORMATION

1.1.1 DEVICE ELEMENTS

1 –External GNSS antenna connector.

5 –Mounting Holes.

2 –Micro USB connector.

6 –Channel 1 Connector.

3 –Channel 1 LED.

7 –Channel 0 Connector.

4 –Channel 0 LED.

1.1.2 PRODUCT DRAWINGS

1.1.3 TECHNICAL SPECIFICATION

Functions

ReXgen 2

ReXgen 2 IMU

CAN Interfaces

2 x CAN/CAN FD

ISO 11898-1: Compliant with CAN (up to 1 Mbit/s)

ISO & Bosch CAN FD (up to 8 Mbit/s)

Conforms to CAN protocol version 2.0 - part A, B

Max 20000 mps

Meets the requirements of ISO 11898-2:2016 & ISO 11898-5:2007 physical

layer standards

CAN/CAN FD Functions

Supports custom baud rates

CAN/CAN FD Bit timing selection

SAE J1939 support (Source Address, Destination Address & PGN Filters)

Silent Mode Configurable

CAN DBC Support

CAN frame error detection

LIN Interface

1 x LIN (up to 20 K Baud with LIN-Compatible Output Driver)

Inputs

2 x Digital and 2 x Analog

Positioning & IMU Sensors

GNSS

Up to 18 Hz rate

GNSS Receiver Type

72-channel, GNSS L1C/A, SBAS

L1C/A, QZSS L1C/A, QZSS L1-SAIF,

GLONASS L1OF, BeiDou B1I , Galileo

E1B/C

Position Accuracy

2.0 m CEP*

Acquisition

Cold starts: 26s

Reacquisition: 2 s

Antenna

External

Accuracy

Velocity: 0.05m/s

Heading: 0.3 degrees

Altitude: not specified

Accelerometer

±2/±4/±8/±16 g full scale

Gyroscope

±125/±250/±500/±1000/±2000 dps

full scale

PC Interfaces

Rugged Micro USB 2.0

Data Storage Capability

8 or 16 GB Inbuilt eMMC storage

32 GB Inbuilt eMMC storage

Supported Protocols

CAN Monitoring (RAW CAN signals, SAE J1939 support)

LEDs

Triggering

Trigger on CAN ID, CAN Signal, Digital Input.

Trigger on DM1 counter.

Data Storage format

FAT32, Log files accessible via ReXdesk software

File Format Supported

ASAM MDF (.mf4), CSV, MATLAB, ASC, BLF

Data Logger Configuration

Supplied with Influx ReXdesk configuration software, XML based

Analog Input

Number of channels

2 x Bipolar single-ended inputs

Range

+/- 10 V

Resolution (ADC)

12 Bit

Max sampling rate

1 kHz

Input Impedance

> 50 K Ohms

Safe Applied Voltage

+/- 28 V

Digital Input

Number of channels

2 x Unipolar single-ended inputs

Input Switching Thresholds

Low < 0.8 V, High > 2.5 V (up to 28V)

Safe Applied Voltage

+/- 28 V

1.1.4 ELECTRICAL DATA

BUS & Signals

Operating Voltage

Power supply - OBD

+4.5 to +31V

Power supply - USB

+4.5 to +5.5V

CAN FD

+2 to +3V

LIN

0 to +24V

Digital Input

0 to +28V

Analog input

+/- 10V

Function

Description

Transceiver Protection

Bus fault protection: ±58 V

Thermal-shutdown protection (TSD)

Under-voltage protection

Enclosure

PC+ ABS

IP Rating

IP65

Dimension

L - 100 mm, W - 73.5 mm, H –27.4 mm

Weight

220164 Grams

Mounting Holes

4 mounting holes and screws

Stackable

Yes

Environmental Tolerance

Working temperature -40degC to +85degC; Humidity max 90%

Power Saving

Wake Up On CAN, Power Down Mode, Sleep Modes,

Wake Up On Movement

Power Consumption

Normal Operation: 87 mA at 12 V

Power Down Mode: <2 mA

*CEP - circular error probable

1.1.5 INTENDED USE

The ReXgen2 is one of the most compact, pocket-sized data loggers suitable for automotive and

various industrial applications. The device is designed to log data continuously for hours from a CAN

bus and simultaneously save it to the embedded SD memory card. The device is tolerable to all

harsh environments that require an IP65 class protection. It can be easily mounted and integrated

with your vehicle /machine.

1.1.6 LIABILITY & WARRANTY

Influx Technology assumes no liability for damages caused by normal wear, installation errors,

operating or maintenance faults. This is also applicable when the user modifies the devices, any

accessories, or the software without the prior approval of Influx Technology.

1.1.7 CONFORMITY

For detailed information on the respective tests, see Chapter Certifications.

The device meets the following standards and legal requirements:

Compliance with CE

This device complies with the directives, standards and normative documents listed in chapter

Certifications.

Compliance with FCC

This device complies with the directives, standards and normative documents listed in chapter

Certifications.

Compliance with ROHS

This device complies with the directives, standards and normative documents listed in chapter

Certifications.

1.2 DEVICE KIT

1.2.1 HARDWARE

Packaging will contain the following components:

INF 2110/INF 2111

▪1x Rexgen2 with integrated cable

▪1x Micro USB

INF 2112/INF 2113

▪1x Rexgen2 with integrated cable

▪1x Micro USB

▪1x GNSS Antenna with 5M long cable

1.2.2 SOFTWARE

ReXgen2 device will be supplied with a freely distributed configuration and data retrieval software, ReXdesk.

The software can be downloaded from our website, www.influxtechnology.com.

Otros manuales para ReXgen

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Registrador de datos de Influx Technology

Influx Technology

Influx Technology ReXgen 2 Manual de usuario

Influx Technology

Influx Technology ReXgen Manual de usuario

Influx Technology

Influx Technology ReXgen1 Manual de usuario

Manuales populares de Registrador de datos de otras marcas

TESTO

TESTO 176 Manual de usuario

HT Italia

HT Italia XL421 Manual de usuario

HBM

HBM SOMAT XR CX22B-R Manual de usuario

Agtrix

Agtrix 380i Manual de usuario

Hobo

Hobo H8 Pro Manual de usuario

Beijing ART Tech

Beijing ART Tech PCI2320 Manual de usuario

Athena

Athena GET SL1 Manual de usuario

Motec Systems

Motec Systems C185 Manual de usuario

Beijing ART Tech

Beijing ART Tech USB2832 Manual de usuario

Rotronic

Rotronic HygroLog HL20 Manual de usuario

MRC

MRC DW-6092 Manual de usuario

Racelogic

Racelogic VBOX LapTimer Manual de usuario

Edu-Logger

Edu-Logger 900-240 Manual de usuario

Elma

Elma DT173 Manual de usuario

MadgeTech

MadgeTech PRTemp140 Hoja de especificaciones

Comet

Comet U0121M Manual de usuario

pico Technology

pico Technology PT-104 Manual de usuario

Soil Instruments

Soil Instruments GTecLink Manual de usuario