INFITHEON InfiSENSIS Manual de usuario

infiSENSIS

Autonomous Alarm System

User Manual V2.0

Table of Contents

1SYSTEM OVERVIEW 5

1.1 Introduction 5

1.2 Applications 6

1.3 Features 6

1.4 System Basics 7

1.4.1 Anti-Burglary Protection 7

1.4.2 High Temperature Protection 8

1.4.3 Alarms 8

1.4.4 Tele-Control 9

1.5 System Components 9

2USER INTERFACE 10

2.1 infiSENSIS Device 10

2.2 LCD Front Panel 11

2.3 Keypad 11

2.3.1 Status LEDs 12

2.3.2 Alphanumeric Keypad 13

2.3.3 Navigation Keys 13

2.3.4 Function Keys 14

2.4 Alarm Siren 15

2.5 Switches / Interface Panel 15

2.5.1 ON/OFF Switch 17

2.5.2 Mini USB interface 17

2.5.3 SIM Card Holder 17

3SYSTEM SETUP 19

3.1 Infrasonic Setup 19

3.1.1 Infrasonic Sensor Calibration 19

a) Sensitivity Calibration 20

b) Hardness Calibration 21

3.2 GSM 22

3.2.1 GSM activation/deactivation 22

3.2.2 GSM numbers 22

3.2.3 Incoming Call Visible (inCall Visible) 23

3.2.4 Still Alive 24

3.3 Light Sensor 25

3.4 Time Delay 25

3.5 Alarm Duration 26

3.6 Selection of External Sensors Voltage (ΕΧΤ Sensors Powering) 27

3.7 Triggers Setup 27

3.7.1 Digital Input Trigger 27

3.7.2 Temperature Trigger 28

3.7.3 Light Trigger 29

3.8 AUDIO Alarm ON 30

3.9 GSM Call ON 31

3.10 SMS ON 32

3.11 RELAY ON 34

3.12 Default Values 35

4BASIC SYSTEM OPERATIONS 37

4.1 System Initialisation 37

4.1.1 System Calibration 37

4.1.2 GSM Operation Setup 38

4.1.3 Other parameters setup 39

4.2 Arming/Disarming the System 39

4.3 Generating Emergency User Alarms 40

5ADVANCED SYSTEM OPERATIONS 41

5.1 Using Profiles 41

5.2 Tele-Control 41

5.3 Software Upgrade 43

6SYSTEM TESTS 44

6.1 Infrasonic Sensor Test 44

6.2 Digital Input Test 45

6.3 Relay Test 45

6.4 Light Sensor Test 46

6.5 Status SMS Test 46

APPENDIX A DEFAULT VALUES 48

APPENDIX B Table of LED Indications 49

APPENDIX C SMS Table 50

APPENDIX D Tele-Control 52

1SYSTEM OVERVIEW

1.1 Introduction

This user manual explains all you need to know about your infiSENSIS, an Autonomous Alarm

System, and provides step-by-step instructions for all the system’s user functions.

InfiSENSIS has been developed by INFITHEON Technologies, a leading manufacturer of advanced

security products. The system uses infrasonic technology in order to detect the level of

infrasonic waves created, by air movement, when a door or a window is forcefully opened or

tampered with. The system is activated every time someone tries to intrude your space by

compromising any opening, such as window, door or other entry point provided that that your

doors are locked a your windows latched and any other openings are properly secured

When a potential intruder tries to break into your house, tests whether it is closed and locked,

uses tools on openings, or applies pressure and he creates vibrations, such actions are detected

by infiSENSIS. Since the system detects the intrusion attempt at the time the potential intruder is

trying to enter the protected area, it provides an early warning which prevents as well as deters

any intrusive action, thus giving you the necessary time to react.

The system consists of one single device (a mini-computer with sensors) housed within a plastic

panel enclosure. It requires no special installation. It is very easy to operate the infiSENSIS unit in

your house, office or any other enclosed space. You only need to plug it to the mains (a power

supply unit is included), and then activate it. The system will inform you visually –using status

LEDs, and audibly –using its built - in loud siren should the security of your home is threatened.

It should be noted that infiSENSIS has been patented through the Hellenic Industrial Property

Organisation (OBI) and a patent application has been filed in the European Patent Office (EPO).

1.2 Applications

InfiSENSIS, due to its innovative technology, numerous functionalities, and user friendly features,

can serve various security purposes:

Closed space protection (e.g. houses, holiday residences, warehouses, containers)

Vehicle protection

Remote Monitoring & Control of closed spaces (detecting temperature, lighting,

human movement, etc.)

Acoustic monitoring

Protection of any other areas where monitoring is necessary (e.g. rented

apartments, temporary residences), but permanent installation is not possible and

portability is an issue.

InfiSENSIS can be remotely operated through SMS’s or unanswered calls.

1.3 Features

InfiSENSIS alarm system has many features in order to suit a wide range of applications. This

manual outlines all of those features in detail.

If you have any questions regarding the features described in this manual, please ask your local

provider. Information is also available on our website: www.infisensis.com.

The system incorporates the following features:

Infrasonic Sensors for the protection of enclosed spaces (detection of forceful

opening or tampering of doors and windows) –this includes a protection area up to

200 m2.

Sensitive Internal microphone for remote acoustic monitoring of the protected area

Embedded thermometer sensor

Embedded alarm siren

Internal Lithium battery for independent operation (1000mAh) ensuring

uninterrupted 24hr operation (in case of power outage)

Light Sensor

Easy to use keypad and LCD display

Input for external sensors. InfiSENSIS can be connected through this input to a

plethora of commercial sensors, such as infrared radars electromagnetic traps,

motion detectors etc.

Relay output (NO/NC) for the remote control & operation of lights and home

appliances

Remote access via SMS or phone calls

Home Environmental conditions monitoring (e.g. temperature, light)

GSM unit for sending alarm notifications through SMS or phone calls

Urgent Help- Personal Alarm Activation (the system makes automatic calls to pre-

stored phone numbers and switches on its microphone so that the remote user can

acoustically monitor the protected area).

1.4 System Basics

1.4.1 Anti-Burglary Protection

The system must be armed before it can sense intrusions. To arm your system, press the desired

arming key or send the corresponding SMS message. To disarm the system, press the disarming

key or send the corresponding SMS message. The arming and the disarming can be also done

through a short unanswered call (1 up to 2 rings).

1.4.2 High Temperature Protection

High Temperature (or low temperature) protection can always be activated. An SMS message is

sent when the room temperature exceeds a certain limit that is set by the user.

1.4.3 Alarms

In the case of an intrusion attempt infiSENSIS will alert you with an audio alarm (the embedded

loud siren of the system will sound) and an alarm message will also be sent to the predefined

mobile numbers. To stop the alarm sounding, simply disarm the system by DISARM KEY, SMS

message or a short unanswered call (1 up to 2 rings). The system supports mobile

communication, so that you can receive information from your mobile phone about the system’s

status. If an event occurs on the protected premises, you are immediately informed no matter

where you are in the world.

The following events, if programmed, send you an SMS message:

Infrasonic Alarm

Personal Alarm

Digital Input –DIN Alarm

Temperature Alarm

Light Alarm

Low Battery (battery level below 30%).

1.4.4 Tele-Control

The System offers a wide range of Tele-control functions which provide remote access to it, via a

mobile phone. You can call your home at any time in order to operate your infiSENSIS or to

check the status of your system while you are away.

1.5 System Components

InfiSENSIS is an integrated autonomous alarm system. For example, in case of intrusion in a

protected area the system will send an SMS to predetermined mobile phone numbers to notify

you about the event. InfiSENSIS has an embedded internal siren, which also provides the

possibility of connecting an external siren as well. The system’s internal siren is activated by

certain events and its purpose is to audibly warn you in case of a security threat.

Optionally various other sensors and peripheral devices (such as radars, infrared sensors,

electromagnetic sensors) can be connected to the system even though this is not necessary for

its proper operation.

2USER INTERFACE

This chapter provides a brief introduction of infiSENSIS. It is important that you familiarize

yourself with this device before reading the following chapters which describe the system

operation in further detail.

2.1 infiSENSIS Device

InfiSENSIS provides you with all the functions you need to control your system and it consists of

the following components:

LCD Front Panel

Keypad

oStatus LEDs

oAlphanumeric Keypad

oNavigation Keys

oFunction Keys

Alarm Siren

Switch / Interface Panel

oΟΝ/ΟFF Switch

omini USB interface

oSIM Card Holder

oExternal Device Interface (I/O Connector).

Tabla de contenidos

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario

INFITHEON infiSENSIS Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas