Infineon TLE5501 Series Manual de usuario

1Rev.1.0

www.infineon.com 2018-08-01

TLE5501 Eval Kit

Scope and purpose

This document describes the Evaluation Kit for the TLE5501 TMR based angle sensor.

The purpose of this manual is to describe the software installation process and how to use the TLE5501 angle

sensor Evaluation Kit.

Intended audience

This document is intended for anyone who wants to use the TLE5501 Evaluation Kit

2Rev.1.0

2018-08-01

TLE5501 Eval Kit

Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1 General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Evaluation Kit for Angle Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.1 Connection to PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.2 Sensor readout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.3 How to calibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.4 Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.5 Output buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Table of contents

3Rev.1.0

2018-08-01

TLE5501 Eval Kit

General description

1 General description

The Eval Kit consists of:

• an Infineon XMC1100 Boot Kit (microcontroller)

• the TLE5501 Angle Shield which can be plugged onto the Boot Kit

• a “magnetic knob” that can be mounted on top of the shield

Figure 1 Infineon XMC1100 Boot Kit

Figure 2 TLE5501 Angle Shield

The Eval Kit is complemented by the TLE5501 Eval Kit GUI (Evaluation Kit for Angle Sensors window, see

Figure 3).

For connection to the PC a micro USB cable is required.

Notes

1. The Eval Kit assumes that the sensor gets 5 V via USB and the integrated regulator on the XMC Boot Kit.

2. All calculations are made with the above assumption! If you create your own setup please also take into

account VDD monitoring. Please respect the instructions in the TLE5501 E0002 Safety Manual.

4Rev.1.0

2018-08-01

TLE5501 Eval Kit

General description

TLE5501 Angle Shield description

The TLE5501 Angle Shield has to be plugged onto the Boot Kit. Care has to be taken that the pins are correctly

aligned.

The TLE5501 sensor is soldered on the shield in a “breakout” area that can be easily broken of the shield and

used in another application if needed.

The shield has mounting holes for a magnetic knob that can be used to demonstrate the functionality of the

sensor.

The shield has also a voltage buffer available on board, and the output of the sensor can be optionally buffered

by selecting the correct DIP switch settings.

5Rev.1.0

2018-08-01

TLE5501 Eval Kit

Installation

2 Installation

1. Connect the Eval Kit with an USB cable to an USB port on your computer.

2. Install the programmer software by double-clicking on the file: TLE5501_EvalKit_vx.msi.

3. If you do not have installed Segger Driver & .NET 3.5 included with this installer, install them.

4. Start the installed software TLE5501 – Eval Kit.

6Rev.1.0

2018-08-01

TLE5501 Eval Kit

Evaluation Kit for Angle Sensors

3 Evaluation Kit for Angle Sensors

3.1 Connection to PC

After starting the software, a device should appear in the Programmer list, click

the Connect button to connect the Eval Kit.

In the Sensor drop-down list select the sensor TLE5501 and click Start.

The Evaluation Kit for Angle Sensors window shows the real time angle read-out

of the sensor and other related information (see Figure 3).

7Rev.1.0

2018-08-01

TLE5501 Eval Kit

Evaluation Kit for Angle Sensors

3.2 Sensor readout

The Evaluation Kit for Angle Sensors window displays the uncalibrated differential angle with the angle gauge.

It also reports the voltage for each output (SinP, CosP, SinN, CosN).

Figure 3 Evaluation Kit for Angle Sensors window

8Rev.1.0

2018-08-01

TLE5501 Eval Kit

Evaluation Kit for Angle Sensors

3.3 How to calibrate

For analog angle sensors, the offset, amplitude and orthogonality of the raw signals sin and cos has to be

calibrated to achive high angl eaccuracy. This calibration procedure can be performed as described below:

Click Calibrate. The calibration window appears.

In den calibration window click Ok.

Rotate the magnet 360° in the direction shown in the

calibration window. If the red label turns green, press Ok.

Repeat the process for the other direction, press Ok.

9Rev.1.0

2018-08-01

TLE5501 Eval Kit

Evaluation Kit for Angle Sensors

3.4 Safety features

• The right-down area of the Evaluation Kit for Angle

Sensors window displays information that is related

to the safety concept for TLE5501 described in the

Product Safety Manual.

• To get all the safety fields populated a calibration is

required.

• The external safety mechanisms were implemented

in the Eval Kit and violations of the expected values

are presented in red.

• If you hover with the mouse over the Iicon after

performing a calibration you will see more

information about the calibration parameters.

10 Rev. 1.0

2018-08-01

TLE5501 Eval Kit

Evaluation Kit for Angle Sensors

3.5 Output buffer

On the sensor shield, there are 4 DIP switches which allow to select an output buffer for the analog raw signal

sin and cos. With this buffer enabled, a low output impedance is provided.

For special application, e.g. which high capacitive load, this option is preferred as it avoids thehigh impedance

of theTMR bridge.

Otros manuales para TLE5501 Series

Tabla de contenidos

Otros manuales de Placa madre de Infineon

Infineon

Infineon TLE987 Series Manual de usuario

Infineon

Infineon CYW989820M2EVB-01 Manual de usuario

Infineon

Infineon Driver SBC Evaluation Board Manual de usuario

Infineon

Infineon XDP710 Manual de usuario

Infineon

Infineon AIROC CYW920822M2P4TAI040-EVK Manual de usuario

Infineon

Infineon 2ED4820-EM EB2 2HSV48 Manual de usuario

Infineon

Infineon EVAL AUDIO MA2304DNS B Manual de usuario

Infineon

Infineon LITIX Power TLD5190-1QV Manual de usuario

Infineon

Infineon CYPRESS Manual de usuario

Infineon

Infineon 3D Magnetic Sensor 2 Go Manual de usuario

Infineon

Infineon XENSIV PAS CO2 Sensor2Go Manual de usuario

Infineon

Infineon iMOTION AN2018-35 EAL-M1-IM818-A Manual de usuario

Infineon

Infineon Audiohub Nano Analog Manual de usuario

Infineon

Infineon TLE989 EVALB LQFP Series Manual de usuario

Infineon

Infineon iMOTION EVAL-M7-D112T Manual de usuario

Infineon

Infineon EVAL AUDIO MA12040 Manual de usuario

Infineon

Infineon CYW920819M2EVB-01 Manual de usuario

Infineon

Infineon TriBoard TC3X5 Manual de usuario

Infineon

Infineon IR3447A Manual de usuario

Infineon

Infineon EVAL-M1-IM818-A Manual de usuario

Infineon

Infineon Cypress MB2146-223 Manual de usuario

Infineon

Infineon TLD5542-1IVREG-EVAL Manual de usuario

Infineon

Infineon TLS820F3ELVxx Manual de usuario

Infineon

Infineon TLE8082ES Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario