P.1 of 2
VOX-3000 OPERATION MANUAL
Congratulations on the purchase of your VOX 3000 talking scale.
Forany assistance contact: Industrial Weighing Systems
You canalso visit usat www.iwsystems.ca
Technical Specification
Maximum Loading : 3000 grams or 6lb 10oz
Resolution : 1 gram or 0.1oz
Power : 9V Battery
Battery Installation
1. Press and push open the battery cover located at the bottom of the unit.
2. Insert one 9V size battery matching the (+) and (-) polarity covers with the
battery. Close the battery cover until it clicks shut.
Note : If the battery symbol appears in the display, it means low battery power. It is
time to replace the battery. If the power is too low, it will show “Lo” when powered
on and then it will turn off automatically.
Weighing Function
1. Turn the scale on by pressing the “ON” button. It will say “Hello!” Once the
platform is stable, it will say “I’m ready” and display “0g”.
2. Place the item to be weighed onto the scale platform. The weight will be displayed
and spoken when the reading is steady.
3. There is a stability indicator “H” in the top left corner of the screen. Whenever the
weight is stable, the “H” will be displayed before the voice reading.
4. Turn the scale off by pressing the “OFF” button. It will say “Good-bye”.
Note : Do not exceed the weighing capacity of the scale. You can cause permanent
damage and void the warranty. The scale will give the warning “Beep, beep,”
and show “ERR” if it is trying to weigh above it’s capacity.
The voice reading function only will read out a change if weight if that change
is greater than 5 grams.
To select oz or gram
Use the g/oz button to select the desired unit.
