INDIWORK IW03LX Manual de usuario
Instruction Manual
High-Definition Link for Lexus
IW03LX
Model Name IW03LX
Latest Firmware Date 2016 -09 -06
Manual Version Rev. 3.9
Language English
Release Date: 2016 - 12 -30
•Cautions
•Dimension & Exterior
•Components & Optional Parts
•Full Installation Diagram
•HDMI ConnectionDiagram
•Navigation Connection Diagram(Type B)
•Compatibility Chart for Navigation(GPS) Box Models
•GVIF IN / OUT Connection Diagram
•Body ConnectorSpecifications
•Car Compatibility Chart
•Activation by Original buttons
•DIP Switch Settings
______________________________________________________________ 3
__________________________________________________ 4
__________________________________________ 5
_______________________________________________ 6
_____________________________________________ 7
________________________________ 8
____________________ 9
____________________________________ 10
________________________________________ 11
_______________________________________________ 12
_________________________________________ 13
___________________________________________________ 14
Contents
3
IW03LX-related
•You should check the names and colors of each wires exactly, before you connect the wires.
ex) CAN HIGH: White wires / CAN LOW: Blue wires
• The ‘POWER / CAN Cable’ should always be connected last and be disconnected first.
•The 'Mode Switch' is an optional part to change modes forcibly without CAN-BUS.
Generally, the CAN-BUSwires are connected for changing modes by original buttons.
•When the reverse gear is not detected by CAN-BUS,
the 'REVERSE12V IN wire’ should be spliced with 12V power of reverse light.
HDMI device-related
•HDMI mode accepts general-screen resolution of HDMI devices(1080P / 1920*1080).
•Generally, '5V 1A Power output(5V USB POWER)' is a standard voltage for charging smartphone.
If you need higher voltage than 5V, you should add a separate power supply.
Navigation(GPS) box-related
•When you connect the power wires(B+, ACC) to the navigation(GPS) box,
the ‘NAVI (12V) OUT' wire supported by IW03LX should be spliced with an ACC wire of navigation box.
•The navigation box should be powered off before unplugging the HDMI cable.
Cautions
4
ⓐ ⓑ ⓒ ⓓ ⓔ
ⓕ ⓖ ⓗ ⓘ ⓙ
Width:142 mm
Length: 91 mm
Height: 22 mm
Exterior
Dimension
ⓐ
DIP SWITCH
ⓑ
AV IN / OUT
ⓒ
TOUCH IN
(Not Used)
ⓓ
MODE
ⓔ
POWER/ CAN
ⓕ
HDMI IN
ⓖ
5V USB POWER
ⓗ
NAVI IN
ⓘ
UART I/F
ⓙ
LVDS OUT
5
POWER / CAN Cable GVIF-IN Cable GVIF PCB HDMI Cable
(For GVIF) AV IN / OUT Cable 5-Pin Micro USB Cable
Mode SwitchHDMI Extender
(For stick type HDMI device)
HDMI Cable
(Male to Male)
GVIF-OUT Cable
Components
Optional Parts(sold separately at the indiwork)
External Rear View
Camera
Audio(AUX) Output of
Navigation Box
Auxiliary(AUX)
Input of the car
External Front View
Camera
AV device
(ex: DTV Box, Divx)
NAVI 12V Power Output(NAVI 12V OUT)
AUDIO-KEYCAN Hi(White)
*OEM Monitor –24-Pin Connector
Pin # 2 = ‘Blue’ Wire *Cut!!
Pin # 1 = Battery Power(B+ / Red)
Pin # 13 = ACC Power(Yellow)
Pin # 24 = Ground(GND / White/Black)
Ground Input(GROUND)
Battery Power Input(BAT +)
HDMI
HDMI
HDMI USB
6
GVIF IN / OUT Connection
Monitor(OEM)
AUDIO-KEYCAN Lo(Blue)
GVIF
IN / OUT
PCB
HDMI
1 5 6 14
15 28
1 2 12
13 24
(OEM GVIF Cable)
HDMI
HDMI
*Head Unit(OEM) –24-Pin Connector
Pin # 5 = CAN LOW (White)
Pin # 6 = CAN HIGH (Light Brown)
※Cut the genuine No.2 wire(Blue)!
*24-Pin Connector
Pin # 2 = Blue Wire
Full Installation Diagram
※Optional External Devices
Navigation Box
HDMI Device
AV-Input(AV2)
FV-CAM Video Input
(AV1)
NAVI Audio Input
Audio Output
RV-CAM Video Input
DIP S/W Setting
12V Power Output & GNDOutput(RV-CAM Power)
ReverseSignal Detection(optional)
Mode
Switch
(optional)
USB
USB
HDMI
HDMI
(Female)
USB
‘Stick Type’ HDMI Devices
HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT
HDMIDevice
HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT
HDMIDevice
USB
HDMI
HDMI
(Male)
‘Dongle & Adapter’ Type HDMI Devices
HDMI Connection Diagram
(5V-1A Power output for HDMI Device) (5V-1APower output for HDMIDevice)
7
(HDMIExtender) (HDMICable)
HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT
8
HDMI Touch Screen Panel
HDMI
Navigation Connection Diagram(Type B)
Navigation(GPS) Box Navigation(GPS) Box
HDMI
HDMI
Touch screen panel
USB
USB
(USB Cable is connected with the ‘N-Link’, only)
MICROCITY - N-LinkI-NAVI X1 CUBE
Model Country Dip S/W
(Navigation) Required Parts
MICROCITY
N-Link South Korea -
HDMI Cable
(HDMI to HDMI) USB A-A Cable
(USB to USB)
MYVI
MS1400 Digital South Korea
OFF(↓): 1, 2, 3
ON(↑) : 4 HDMI Cable
(HDMI to HDMI)
iNAVI
X1 CUBE South Korea
OFF(↑): 1, 2, 3, 4 HDMI Cable
(HDMI to HDMI)
9
1 2 3 4
ON
↑
Compatibility Chart for Navigation(GPS) box models
•The 'IW03LX(HD-Link)' supports navigation(GPS) box models equipped with 'Digital video output'.
•It does not support the 'RGB video signals'.
1 2 3 4
OFF
↓
ON
(Provided GVIF OUT Cable)
HDMI
HDMI
‘Display Audio’ Head Unit(OEM)
HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT
GVIF
IN / OUT
PCB
LCD
Cable
(OEM GVIF Cable)
10
(Provided GVIF IN Cable)
Monitor(OEM)
GVIF Connection Diagram
GVIF Connection
•'Genuine(OEM) GVIF Connector' should be connected
to ‘GVIF IN Connector'.
• ‘Provided GVIF OUT Connector' should be connected to
the OEM monitor instead to the genuine connector.
Tabla de contenidos
Otros manuales de Accesorios para automóviles de INDIWORK
INDIWORK
INDIWORK IW-NTG55-N23 Manual de usuario
INDIWORK
INDIWORK IW04A-N Manual de usuario
INDIWORK
INDIWORK BMW Easy Access Manual de usuario
INDIWORK
INDIWORK A-LINK HD NTG5.5 Manual de usuario
INDIWORK
INDIWORK A-LINK2-Volvo Manual de usuario
INDIWORK
INDIWORK IW04A-4G Manual de usuario
INDIWORK
INDIWORK IW03C-EQ-D Manual de usuario
INDIWORK
INDIWORK A-LINK2-LX Manual de usuario
INDIWORK
INDIWORK IW06B-N23 Manual de usuario
INDIWORK
INDIWORK IW04A3-N Manual de usuario
