Inctel IN-X300 Manual de usuario

IN-X300

N-

-X

Inctel co,.ltd would like to thank you for purchasing this product.

- 1 -

IN-X300

Table of Contents

1. Product Features ..................................................................................................................................................................... - 3 -

What is the access terminal kit?.......................................................................................................................................... - 3 -

What is the terminal services software?.............................................................................................................................. - 3 -

Features............................................................................................................................................................................... - 3 -

Minimum System Requirements......................................................................................................................................... - 3 -

Operating Systems.............................................................................................................................................................. - 4 -

Conceptual Diagram ........................................................................................................................................................... - 4 -

2. Installation .............................................................................................................................................................................. - 4 -

Install the IN-X300 PCI Card ............................................................................................................................................. - 4 -

Connect Peripheral Devices................................................................................................................................................ - 6 -

Install the software drivers.................................................................................................................................................. - 6 -

Install the terminal services software and register.............................................................................................................. - 7 -

3. Product Registration ............................................................................................................................................................. - 13 -

Online Registration........................................................................................................................................................... - 16 -

Offline Registration .......................................................................................................................................................... - 18 -

4. Uninstallation........................................................................................................................................................................ - 21 -

5. Updating the Terminal Services Software............................................................................................................................ - 21 -

6. Using the management console............................................................................................................................................. - 22 -

Local Settings ................................................................................................................................................................... - 22 -

Sessions............................................................................................................................................................................. - 23 -

Information & Settings ..................................................................................................................................................... - 26 -

USB-Device Assignment(s).............................................................................................................................................. - 30 -

7. Troubleshooting an error message........................................................................................................................................ - 31 -

Troubleshooting the access terminal................................................................................................................................. - 31 -

Troubleshooting the host PC............................................................................................................................................. - 32 -

8. Glossary................................................................................................................................................................................ - 32 -

9. FAQ ...................................................................................................................................................................................... - 33 -

- 2 -

IN-X300

1. P

Fea

Min

roduct Features

at is the access terminal kit?

The IN-X300 access terminal kit enables you to dramatically cut computing costs by sharing the untapped power

of PCs. The kit includes three access terminals, one PCI card, and terminal services software that work together to

efficiently harness excess computing capacity and enable multiple users to share a single PC. Best of all, IT staff and

end users do not need special training because this end-to-end solution is easy to manage and is compatible with

standard PC applications.

at is the terminal services software?

Note: This document uses the following terms interchangeably: "User software," "host INCTEL software,"

"terminal services software “and” NCX-2000-XP".

NCX-2000-XP, the terminal services software for the IN-X300, divides the host PC's resources into independent

sessions that give each user their own robust PC experience. One PC can support up to seven users.

tures

Cost effective

Save up to 70% on your computing costs versus buying a traditional desktop PC.

Minimal maintenance required

You only have to maintain and upgrade the host PC.

Simultaneous desktop operation

Each user can run their own applications.

Supports multiple resolutions

1024x768, 800x600, 16-bit color

Small, efficient and eco-friendly

With a small footprint and no moving parts, the IN-X300 runs completely silent and saves energy by using only

5 watts. Its design meets strict environmental guidelines and is ROHS compliant.

imum System Requirements

For one IN-X300 PCI card, a host PC with at least the following:

• A 1.3 GHz processor

• 512 MB RAM

• Keyboard, mouse, and monitor required for each access terminal

• Speakers optional for each access terminal (amplified speakers recommended)

For two IN-X300 PCI cards, a host PC with at least the following:

• A 2.4 GHz processor

- 3 -

IN-X300

• 1 GB RAM

• Keyboard, mouse, and monitor required for each access terminal

• Speakers optional for each access terminal (amplified speakers recommended)

erating Systems

• Windows

• Linux

nceptual Diagram

2. I

Ins

nstallation

tall the IN-X300 PCI Card

1. Disconnect all peripheral and power cables from the host PC.

2. Remove the system cover of the host PC.

3. Find an available PCI slot for the IN-X300 PCI card.

- 4 -

IN-X300

4. Insert the IN-X300 PCI card and secure the end of the card to the chassis with a retaining screw.

Note: If required, you can use the included low profile bracket.

5. Replace the cover and reconnect all peripheral and power cables.

- 5 -

IN-X300

Connect Peripheral Devices

Connect each access terminal to a port on the PCI card using the included Ethernet cables. You can also use any

standard Ethernet cable. Do not exceed the length limit of 15 feet. Also, do not use any Ethernet equipment, such as

a hub or a switch, between the access terminal and the PCI card. Connect peripheral devices to each IN-X300 access

terminal.

Note: Please use amplified speakers.

Note: A LAN cable between the IN-X300 PCI card and the access terminal as long as 33 feet (10 meters) is

allowed if the cable is high quality. Category 6 (Cat6) cables are recommended. Lower quality cables can be a

maximum of 16 feet (5 meters) long.

Install the software drivers

Turn on the host PC. After Windows starts, it will automatically bring up a dialog box called “Hardware Update

Wizard.” Insert the Software Installation CD into the host PC's CD drive. The “Hardware Update Wizard” dialog

box will ask whether it is OK to contact Windows Update to find drivers for the IN-X300 PCI card. Note: Do not

install anything from Windows Update for the IN-X300 PCI card. The driver installation must be done using the

IN-X300 setup application. Select the “No, thanks” radio button and click the “Next” button.

Windows will now automatically bring up a window called, “Found New Hardware Wizard.” Select the “Install

the software automatically (Recommended)” radio button and click the “Next” button. Next, Windows will search

for an IN-X300 bus enumerator driver. Windows will display a message that says the IN-X300 bus enumerator

driver has been found and it has not passed Windows Logo testing to verify its compatibility with Windows XP.

Click on the “Continue Anyway” button. In the next window, click the “Finish” button.

Now Windows will bring up a similar set of dialog boxes as it did for the IN-X300 bus enumerator. This time it’s

for the IN-X300 graphics controller. In the “Hardware Update Wizard” dialog box, select “No, not this time” and

click on the “Next” button. In the “Found New Hardware Wizard” dialog box, select “Install the software

automatically (Recommended)” and click the “Next” button. Windows searches for the IN-X300 graphic controller

driver and brings up a dialog box that says the driver has been found and it has not passed Windows Logo testing.

Click on the “Continue Anyway” button and then the

- 6 -

IN-X300

“Finish” button in the next screen.

The previous paragraph’s process is repeated two more times.

Install the terminal services software and register

Go to "My Computer", open the CD drive's icon, and start the "Install.exe" application.

At the installation screen, click the "software" button.

Before the installation starts, the installation software attempts to connect to the Internet to compare the software

version on the CD with the latest software version on the host server. If there is a later version on the host server, a

prompt will appear to ask if you want to use the version on the CD or if you want to download the latest version and

use it.

Note: It is recommended to download the latest version and use it rather than use an older version on the CD.

At the "Welcome" screen, click the "Next" button.

- 7 -

IN-X300

At the antivirus and firewall warning screen, click the "Next" button.

At the software license screen, you may view the software license and print it out. When you are finished, click

on the "I agree" checkbox, and then click the "Next" button.

- 8 -

IN-X300

At the software terms of use screen, you may view the software terms of use document and print it out.

When you are finished, click on the "I agree" checkbox, and then click the "Next" button.

At the readme file screen, you may view the readme file and print it out. When you are finished, click the "Next"

button.

- 9 -

IN-X300

At the "Choose destination location" screen, you can install to the default location, or you can choose a different

location. When you are finished, click on the "Next" button.

At the "Choose Password for Administrator" screen, select whether or not to use an administrator password and

whether or not to install the Network Administration Console. If you choose to use an administrator password, enter

- 10 -

Tabla de contenidos

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario