© 2021 Incam Systems
1
Overview
Incam Systems Co., Ltd. is engaged in provision of products and services for
broadcasting and film industry. Products designed and manufactured by Incam
include robotic rail camera systems, remote control pan/tilt heads, wireless
control systems, optical transmission systems, camera control panels, micro
cameras, customized products, etc. With our professional technical team, we
also provide the rental solution services, system design, on-site image quality
control services, professional after-sales services.
LCW-20P is a universal wireless control unit for SONY camera with flexible
functions, highly reliable and small size. The working frequency range of LCW-
20P is arranged in two bands, 902~928 MHz and 2.402~2.482 GHz. The center
frequency and transmission bandwidth can be adjusted according to the site
environment, the bandwidth is available in 1MHz, 2MHz, 4MHz and 8MHz. The
device is compatible with SONY camera control protocol, it has two tally relay
output and 12VDC tally power output ①, which is especially suitable for flexible
use in live production.
LCW-20P can be combined with other Incam products to consist a variety of
application system, such as camera control signal long-distance transmission
system for SONY camera, consist of FPT-S2E1 portable multi-purpose optical
transmission unit and SONY camera control panel, which provides wireless
control transmission for SONY cameras and extends the control distance
according to different application scenarios. Meanwhile, the video signals of the
camera and program feedback can also be transmitted by V30 or V50E2 video
optical transmission units which supports 12G, 3G and HD.
LCW-20P supports transmission of full function and parameter adjustment of
SONY cameras, when it used together with SONY camera control panel. The
wireless transmission of built-in tally signals inside SONY control protocol is
also supported in a low-latency transmission mode.
①The 12VDC tally power output can only be used for Incam tally lamp (optional). The unit need
to be power off before connecting the tally lamp, otherwise, the unit may be damaged.
