About AccessLinX VoIP Gateways
The AccessLinX units are analog gateways with two Voice-over-IP (VoIP)
ports. The unit enables the use of two independent analog telephone lines
or FAX machines to make VoIP phone calls over the Internet or Intranet. In
addition, it enables connecting up to four computers or segments to the net-
work. Local computers are connected via Ethernet 10/100Base-TX ports.
The Uplink connection is via either a 100Base-FX SFP fiber optic connector
or a 10/100Base-TX copper port. All Ethernet ports are connected by an
advanced switching engine that supports VLANs and QoS.
For
complete
installation
and
configuration
information
for
your
AccessLinX,
please
refer
to
the
User
Guide,
located
on
the
User
Documentation
CD-RROM,
delivered
with
the
unit.
Installing AccessLinX Units
The figure below shows the connectors on the rear of the AccessLinX unit
as it is deployed in a typical application.
• The RJ-11 telephone ports Phone 1 and Phone 2 connect to the
telephony devices.
• The PSTN (lifeline) port can be connected as a standby to the public
telephone network. In case of power failure, the phone connected to
the Phone1 port will be automatically switched from VoIP to this line,
for regular telephone communication.
• The RJ-45 LAN ports connect to the LAN, to other Access units and to
computers. The LAN4 Uplink port connects to the network.
• The AUX/Console port, if available, is an option to be used by author-
ized technicians to configure the unit via a serial PC port.
WARRANTY
IMC Networks warrants to the original end-user purchaser that this product, EXCLUSIVE OF SOFTWARE, shall be free from
defects in materials and workmanship under normal and proper use in accordance with IMC Networks' instructions and direc-
tions for a period of six (6) years after the original date of purchase. This warranty is subject to the limitations set forth below.
At its option, IMC Networks will repair or replace at no charge the product which proves to be defective within such war-
ranty period. This limited warranty shall not apply if the IMC Networks product has been damaged by unreasonable use, acci-
dent, negligence, service or modification by anyone other than an authorized IMC Networks Service Technician or by any other
causes unrelated to defective materials or workmanship. Any replaced or repaired products or parts carry a ninety (90) day
warranty or the remainder of the initial warranty period, whichever is longer.
To receive in-warranty service, the defective product must be received at IMC Networks no later than the end of the war-
ranty period. The product must be accompanied by proof of purchase, satisfactory to IMC Networks, denoting product serial
number and purchase date, a written description of the defect and a Return Merchandise Authorization (RMA) number issued
by IMC Networks. No products will be accepted by IMC Networks which do not have an RMA number. For an RMA number,
contact IMC Networks at PHONE: (800) 624-1070 (in the U.S.) or (949) 465-3000 or FAX: (949) 465-3020. The end-user shall
return the defective product to IMC Networks, freight, customs and handling charges prepaid. End-user agrees to accept all
liability for loss of or damages to the returned product during shipment. IMC Networks shall repair or replace the returned
product, at its option, and return the repaired or new product to the end-user, freight prepaid, via method to be determined
by IMC Networks.
IMC Networks shall not be liable for any costs of procurement of substitute goods, loss of profits, or any incidental, conse-
quential, and/or special damages of any kind resulting from a breach of any applicable express or implied warranty, breach of
any obligation arising from breach of warranty, or otherwise with respect to the manufacture and sale of any IMC Networks
product, whether or not IMC Networks has been advised of the possibility of such loss or damage.
EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, IMC NETWORKS MAKES NO OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS IMC NETWORKS PRODUCT, INCLUDING WITHOUT LIMITA-
TION ANY SOFTWARE ASSOCIATED OR INCLUDED. IMC NETWORKS SHALL DISREGARD AND NOT BE BOUND BY ANY
REPRESENTATIONS OR WARRANTIES MADE BY ANY OTHER PERSON, INCLUDING EMPLOYEES, DISTRIBUTORS,
RESELLERS OR DEALERS OF IMC NETWORKS, WHICH ARE INCONSISTENT WITH THE WARRANTY SET FORTH ABOVE.
ALL IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
HEREBY LIMITED TO THE DURATION OF THE EXPRESS WARRANTY STATED ABOVE.
Every reasonable effort has been made to ensure that IMC Networks product manuals and promotional materials accu-
rately describe IMC Networks product specifications and capabilities at the time of publication. However, because of ongoing
improvements and updating of IMC Networks products, IMC Networks cannot guarantee the accuracy of printed materials after
the date of publication and disclaims liability for changes, errors or omissions.
FFE D E R A L CCO M M U N I C A T I O N S CCO M M I S S I O N RRA D I O FFR E Q U E N C Y IIN T E R F E R E N C E SST A T E M E N T
This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to
operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits.
This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out
in the Radio Interference Regulation of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère
des Communications du Canada.
14
IMC Networks •19772 Pauling • Foothill Ranch, CA 92610-2611 USA
TEL: (949) 465-3000 • FAX: (949) 465-3020
© 2005 IMC Networks. All rights reserved.
The information in this document is subject to change without notice. IMC Networks assumes no responsibility for any errors
that may appear in this document. AccessLinX is a trademark of IMC Networks. Other brands or product names may be
trademarks and are the property of their respective companies.
Document Number 52-80422-00 A0 June 2005
