Image Sensing Systems RTMS Echo Manual de usuario

PN A900-1280-5Rev A

RTMS Echo

User Guide

RTMS

or quoted without written permission from Image Sensing Systems, Inc.RTMS and Echo are trademarks

of Image Sensing Systems, Inc., registered in the United States and other countries.All other product

names referenced in this guide are trademarksof their respective owners.

Record of Revisions

Revision Date Affected Pages Description

A 12/2019 Initial release.

Table of Contents

Preface- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -vi

Federal Communication Commission (FCC) Notices- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vi

Industry Canada (IC) Notices - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -vii

FCC and IC ID Numbers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -vii

CE Certification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -vii

Chapter 1:Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1

General - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1

Features/Benefits - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1

RTMS Echo Technical Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-2

Electromagnetic Interference - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3

Firmware Upgrade Capability - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3

Chapter 2:Pre-Installation Considerations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1

General - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2-1

Safety Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1

Power Considerations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2-1

Cabling Considerations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2-2

Breakout Boxes- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-3

Surge Suppression/Filtering - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-4

Connecting Power and Communications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-5

Providing a Proper Ground - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-7

Placement in Side-Fired Highway Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2-9

Height, Setback, Tilt Requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-11

Guardrails and Barriers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-12

Sunken Road and Roadside Walls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-12

Elevated Roadway- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-13

Installing RTMS Echo on Sign Structures- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-14

Grade Differentials- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-15

Trees - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-15

Chapter 3:Sensor Installation & Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1

General - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3-1

Safety Information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1

Installing the Sensor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2

Setting Up the Sensor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3-4

Logging in to the Sensor For the First Time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-5

Aiming the Sensor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6

Table of Contents

Detect and Adjust Zones - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7

Verifying Vehicle Counts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9

Configure Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-11

Chapter 4:Operations and Adjustments - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1

General - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-1

Logging in to the RTMS Echo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1

Home Tab - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2

Aim Tab - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-4

Zones Tab - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-5

Add a Zone- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-6

Edit a Zone - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-7

Remove a Zone- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-7

Auto Detect Zones- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-8

Calibrate Tab - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-8

Optimizing Volume Count Accuracy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-10

Condition A: Over/Under Count in Adjacent Zones - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-10

Condition B: Under Count in Near Zone - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-11

Condition C: Under Count in Far Zone - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-12

Condition D: Under Count in Several Zones- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-13

Condition E: Over Count in Several Zones- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-14

Condition F: Under Count in First Zone Past a Barrier - - - - - - - - - - - - - - - - - - - - - - - - - 4-15

Speed Calibration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-16

Length Calibration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-17

Data Tab - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-18

Classification By Binned Speed Query- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-19

Classification by Length Query - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-22

Gap Average Query- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-24

Headway Average Query - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-26

Interval Data Query - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-28

Per-Vehicle Data Query - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-30

Speed 85th Percentile Query - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-32

Speed Average Query - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-34

Speed By Bin Query - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-36

Voltage Query- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-39

Volume Query- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-41

Log Tab - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-43

Settings Tab - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-44

Install Firmware- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-44

Table of Contents

Local Area Network Setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-45

Wi-Fi Setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-46

Location Setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-47

Date and Time Setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-48

Traffic Data Storage Setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-49

Interval Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4-50

Sx-300 Protocol Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-51

Region Setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-52

Licensing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-52

Backup/Restore Device Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-53

Download Diagnostics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-54

Reboot Device - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-54

Preface

Federal Communication Commission (FCC) Notices

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off an

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by Image

Sensing Systems, Inc. could void the user’s authority to operate the

equipment.

Per FCC 15.19(a)(3) and (a)(4) This device complies with part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired

operation.

FCC RF Radiation Exposure Statement:

This transmitter complies with FCC RF radiation exposure limits set forth for

an uncontrolled environment.

This transmitter should be installed and operated with a minimum distance

of 30 centimeters (12 inches) between the radiator and your body.

Industry Canada (IC) Notices

English

Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) the user of the device must accept any

interference suffered, even if the interference is likely to lead to undesired

operation.

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Francais

Le présent appareil est conforme aux CNR d'Industrie Canada applicables

aux appareils radio exempts de licence. L'exploitation est autorisée aux deux

conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d'en compromettre le fonctionnement.

Cet appareil est conforme aux normes RSS exempts de licence d'Industrie

Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1)

cet appareil ne doit pas causer d’interférences et (2) cet appareil doit accepter

toute interférence, y compris les interférences pouvant entraîner un

fonctionnement indésirable de l’appareil.

FCC and IC ID Numbers

Echo:

•

FCC ID: J7TRTMSECHO

•

IC ID: 1868A-RTMSECHO

Contains Transmitter Module:

•

FCC ID: UAY-W8997-M1216

•

IC: 6549A-W8997M1216

The FCC and IC IDs can also be found on the label affixed to the outside of the

RTMS Echo.

CE Certification

Certified for the RTMS Echo.

Chapter 1: Introduction

General

The RTMS Echo is a side fire radar mounted on the roadside. Simultaneously,

the sensor provides per vehicle data including volume, occupancy, speed and

classification information in up to 12 detection zones. The installation of RTMS

has never been easier with built-in aiming guidance, auto configuration of the

sensor, and wireless configuration via mobile device or tablet. The data

collected by the RTMS Echo is highly accurate and can be formatted to fit the

needs of your organization or agency’s objectives.

The RTMS technology provides meaningful and reliable data that maximizes

the full potential of existing infrastructure and optimizes the safety and

efficiency of every city.

Features/Benefits

Some of the features and benefits of the RTMS Echo include:

•

Fast, safe installation on existing road-side poles with no traffic

disruptions.

•

Radar transceiver designed for traffic data collection.

•

Built-in aiming guidance and auto configuration for easy installation

and set up.

•

Wireless configuration and management of sensor.

•

Configurable using a mobile device or tablet eliminating the need to

carry a computer or install complicated software.

•

Single RJ-45 connection for TCP/IP communications and power.

•

Data storage of up to one million per-vehicle records and ten thousand

interval records.

Chapter 1: Introduction

RTMS Echo Technical Specifications

*RTMS Echo meets the requirements of the minimum sweep rate as specified

by ERC recommendation (70-03) as specified in IR2030/12/9 2014/88/UK

June 2014.

Table 1-1: Radar Frequency - Radar

Country Bottom

Frequency

Top

Frequency Power

USA/RUS 24.075 GHZ 24.175 GHZ 20 dBm max

FR/Other Europe 24.145 GHZ 24.245 GHZ 20 dBm max

UK* 24.145 GHZ 24.245 GHZ 20 dBm max

Table 1-2: Wi-Fi Frequencies

Country Channels Bottom

Frequency

Top

Frequency Power

North America 1 - 11 2412 MHZ 2462 MHZ 20 dBm max

Europe 1 - 13 2412 MHZ 2472 MHZ 20 dBm max

Table 1-3: Specifications

Measurement Dimensions

Mechanical Width: 12.5 in. (32 cm)

Height: 7.25 in. (19 cm)

Depth: 2.5 in. (7 cm)

Weight: 4.5 lbs (1.5 kg) with bracket

Electrical Voltage: 12-24 V DC

Power: Max = 7.9 Watts; Avg = 7.3 Watts

Temperature Range -40 to +165°F (-40 to 74C°)

Humidity Up to 95% Relative Humidity

Ingress Protection IP67

(Table continues on the next page.)

Chapter 1: Introduction

Electromagnetic Interference

Certified under US FCC Rule part 15 Class B; Canadian CSA C108.8 M1983

Class A; CE. For additional information, see “Preface” on page vi.

Firmware Upgrade Capability

User upgrades of firmware is available through the same web interface used to

set up and configure the RTMS Echo (see “Install Firmware” on page 4-44).

Vibration Resonance: Tested per NEMA TS2 2.2.8.3

Endurance: Tested per NEMA TS2 2.2.8.4

Shock: Tested per NEMA TS2 2.2.9.3

Frequency Bands K band; operates in the 24 GHZ band

Field of View Elevation angle: 57 degrees

Azimuth: 17 degrees

Range: 0 to 250 ft (0 to 76 m)

Regulatory FCC15.107:2019,FCC15.109:2019,FCC

15.109(g):2019,FCC15.207:2019,FCC15.245:2019

RSS‐210:2016+A1:2017

ICES‐003:2016updatedApril2017

EN50293:2012

RadioEquipmentDirective(2014/53/EU)

EN300440V2.2.1:2018,EN301489‐51V2.1.0:2017,

EN300328V2.1.1:2016,EN301489‐17V3.1.1:2017,

EN303413V1.1.1:2017,EN301489‐19V2.1.0:2017

RoHS(2011/65/EU)

Table 1-3: Specifications (Cont’d)

Measurement Dimensions

Otros manuales para RTMS Echo

Tabla de contenidos

Otros manuales de Radar de Image Sensing Systems

Image Sensing Systems

Image Sensing Systems RTMS Echo Manual de usuario

Manuales populares de Radar de otras marcas

SAW D2L

SAW D2L Valentine One Gen2 Manual de usuario

Raymarine

Raymarine Raytheon R20X Manual de usuario

Simrad

Simrad CA34 Manual de usuario

Endress+Hauser

Endress+Hauser Micropilot FMR67B Especificaciones técnicas

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Manual de usuario

ECHOMAX

ECHOMAX Active-X-Band Manual de usuario

AGD

AGD 340 Manual de usuario

Kustom Signals

Kustom Signals Eagle 3 Manual de usuario

SYMEO

SYMEO STU Manual de usuario

Axis

Axis D2110-VE Manual de usuario

MALA

MALA MIRA Manual de usuario

Emerson

Emerson ROSEMOUNT 5300 Manual de usuario

Rosemount

Rosemount 5300 Series Manual de usuario

Endress+Hauser

Endress+Hauser Levelflex FMP56 Especificaciones técnicas

TERMA

TERMA SCANTER 5102 Manual de usuario

GSSI

GSSI UtilityScan Manual de usuario

Acconeer

Acconeer A111 Manual de usuario

Crosley

Crosley CR37 Manual de usuario