www.iMAGsystems.com
- 2 -
iMAGsystems
TH800DS Controller Manual
1 Introduction 3
1.1 Overview 3
1.2 Features 4
1.3 Specifications 4
1.4 Panel 5
1.4.1 Front Panel 5
1.4.2 Rear Panel 6
2 Hardware Installation 7
3 Accessing the Device 8
3.1 Before Accessing the Device 8
3.1.1 Using LAN2 (C) Port 8
3.1.2 Using RS-232 Port 10
3.2 Accessing the Device via Web 12
3.2.1 Using the Administrator Account 12
3.2.2Using the Common User Account 12
3.3 Accessing the Device via Telnet 13
4 Web Configuration Page 13
4.1 Scenes Page 13
4.1.1 Setting Scenes 14
4.1.2 Telnet API Command 15
4.1.3 Logs 16
4.2 Encoders and Decoders Settings Page 17
4.2.1 Configuring the IP Settings of Encoders and Decoders 18
4.2.2 Encoder Setup 19
4.2.3 Changing Encoders and Decoders Alias 19
4.2.4 Restoring Encoders and Decoders to their Default Settings 19
4.2.5 Rebooting Encoders and Decoders 19
5 System Settings Page 20
5.1 IP Setup 20
5.1.1 IP Setup (TX and RX Communication) 21
5.1.2 IP Setup (Telnet Client and Browser Communication) 22
5.2 Web Matrix Switching 23
5.2.1 Importing Configuration File from iMAGsystems THUNDER Manager 23
5.2.2 Web Matrix Page 24
5.2.3 Operating Matrix Switching via Web 25
5.3 Managing Administrator and Common User Account 26
5.3.1 Changing the Administrator Password 26
5.3.2 Creating a Common User Account 26
5.4 Device Maintenance 27
5.4.1 Restoring TH800DS to its Default Settings 27
5.4.2 Rebooting TH800DS 27
5.4.3 Shutting Down TH800DS 28
5.5 Viewing API and System Version 28
6 Updating TH800DS 29
7 FAQ 30
