All products manufactured by Cooper Controls and
identied with the iLumin brand are warranted to be
free from defects in material and workmanship and shall
conform to and perform in accordance with Seller’s
written specications for a period of :
Five (5) years from date of shipment for all occupancy
sensors and Two (2) years from date of factory invoice
for our hardware and software on Lighting Control
Panels.
We warranty all our standard relays for a period of 10
years from date of factory invoice. We guarantee the
performance of our system to specications of your
money back.
This warranty will be limited to the repair or replace-
ment, at Seller’s discretion, of any such goods found
to be defective, upon their authorized return to Seller.
This limited warranty does not apply if the goods have
been damaged by accident, abuse, misuse, modica-
tion or misapplication, by damage during shipment or
by improper service.
Cooper Controls
203 Cooper Circle, Peachtree, GA 30269
800-553-3879 www.coopercontrol.com
There are no warranties, which extend beyond the here-
inabove-limited warranty, INCLUDING, BUT NOT LIM-
ITED TO, THE IMPLIED WARRANTY OF MERCHANT-
ABILITY AND THE IMPLIED WARRANTY OF FITNESS.
No employee, agent, dealer, or other person is author-
ized to give any warranties on behalf of the Seller or to
assume for the Seller any other liability in connection
with any of its goods except in writing and signed by
the Seller. The Seller makes no representation that the
goods comply with any present or future federal, state
or local regulation or ordinance. Compliance is the Buy-
er’s responsibility.
The use of the Seller’s goods should be in accordance
with the provision of the National Electrical Code, UL
and/or other industry or military standards that are per-
tinent to the particular end use. Installation or use not in
accordance with these codes and standards could be
hazardous.
Document 73-888-00 IM8504 Iss.01
Ambient atmosphere requirements
Temperature 320F to 1040F (00C to +400C)
Humidity 0 to 95% non-condensing
CL V 4 4Z RL W IR T1
Raise/Lower
(always tted)
Insert color:
W- White
B- Black
G- Gray
V- Ivory
Insert text:
Blank Scene 1, Scene 2, etc.
T1 Preset 1, Preset 2, etc.
T2 General, Meeting, Seminar, Lecture
T3 Lunch, Cocktails, Dinner, Special
Cooper
iLumin
Revio
Number
of buttons
in rst
column
Number of buttons
in second column.
Z denotes ‘Zone’
function
IR
Receiver
Model numbers
Each model is specied using a part number in the
following format:
[DRAFT 0.3a]
