Warning
If the air coming out of the suction fan contains dust. Stop immediately the X-150 and check for
leakages. Never operate with dust coming out of the suction fan since the suction fan will be worn out.
This can cause severe damages.
Warning
Always turn the X-150 off while moving the equipment. Quick movements of the X-150 can cause
excessive forces on the suction fan. This can cause severe damages
Warning
The X-150 contains rotating and moving parts. When servicing the X-150 make sure the hydraulic
power is switched off, the pneumatic pressure is evacuated and the electric circuit is switched off.
Caution
Components are heavy. Please use lifting devices where necessary to avoid accidents and damages.
Further safety instructions
The X-150 can only be used for what it is intended for
Only qualified and trained personnel may operate the machine
Practice how to turn off the machine in case of emergency
The recommended air pressure cannot be exceeded
Always inspect the equipment before use
Never use the equipment if you suspect it is damaged
Always use good practice and sound judgment
Be aware of what you are doing
Never use the equipment when you are tired or under the influence of drugs, alcohol or
anything else that can affect your vision, your reactions or your judgment
Participate in safety training and other trainings applicable
Never hit the equipment and never misuse it
Store the equipment in a safe place and out of reach for children
Make sure that all equipment is maintained in the right way
Make sure that warning signs and decals are readable and maintained.
Make sure that unauthorized personnel never come within the working area of the equipment
Keep the workspace free from foreign objects
Never point compressed air towards yourself or anybody else. To avoid damages, never use
compressed air to clean your clothes from dust and other dirt.
Safety regulations
These instructions contain important sections dealing with safety.
Special attention must be paid to all framed safety text that begins with a warning symbol (triangle)
followed by a signal word, as shown below.
Warning denotes a hazard or hazardous procedure which CAN lead to serious or life
threatening injuries if the warning is not observed.
Caution denotes a risk or risky procedure which CAN lead to personal injury or damage
to equipment if the warning is not observed.
Also observe the following general safety rules:
Before starting the machine, read through these instructions carefully.
Also read through the safety instructions before putting the machine to use.
For reasons of product safety, the machine must not be modified.
Use approved personal protective equipment.
Use ILMEG Genuine Parts only.
Always replace worn or damaged signs.
