IFM OID20 Series Manual de usuario

Operating instructions

Optical distance sensor

OID20x

UKUK

11474459 / 00 04 / 2019

Contents

1 Preliminary note��3

1�1 Symbols used ��3

2 Safety instructions ��3

3 Functions and features ��4

3�1 Applications ��4

4 Installation��5

4�1 Installation conditions ��5

5 Electrical connection��5

6 Operating and display elements ��6

7 Settings / operation��6

7�1 Switch off the laser ��6

8 IO-Link ��7

8�1 General information ��7

8�2 Device-specific information��7

8�3 Parameter setting tools��7

9 Maintenance, repair, disposal��7

1 Preliminary note

1.1 Symbols used

►Instructions

> Reaction, result

[…] Designation of keys, buttons or indications

→Cross-reference

Important note

Non-compliance may result in malfunction or interference�

Information

Supplementary note

2 Safety instructions

• Read this document prior to set-up of the unit� Ensure that the product is

suitable for your application without any restrictions�

• Improper or non-intended use may lead to malfunctions of the unit or to

unwanted effects in your application� That is why installation, electrical

connection, set-up, operation and maintenance of the unit must be carried out

by qualified personnel authorised by the machine operator�

• In case of malfunction of the unit please contact the manufacturer� If the unit is

tampered with and/or modified, any liability and warranty is excluded�

• The unit complies with the standard EN 61000-6-4� The unit may cause radio

interference in domestic areas� If interference occurs, the user must take

appropriate remedial actions�

WARNING

Visible laser light; laser protection class 2�

Use of controls or adjustments other than those specified herein may result in hazardous

radiation exposure� Damage to the retina is possible�

►Do not stare into the laser beam!

►Apply the enclosed labels (laser warning) in the immediate vicinity of the unit�

►Adhere to the caution and warning notes on the product label�

►Use the enclosed label for the power supply cable�

►EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014 complies with 21 CFR 1040

except for deviations pursuant to Laser Notice No� 50, dated June 2007

Label for supply cable

D-45128 Essen

Product label

3 Functions and features

The unit is used as an optical distance sensor�

3.1 Applications

• The optical distance sensor measures distances between 0�03 and 2 m�

• It has a background suppression of up to 20 m�

• The switching outputs are complementary�

The distance between the sensor and the background must be limited

to max� 20 m by the customer� Otherwise measured values can be

ambiguous → 4.1 Installation conditions.

4 Installation

4.1 Installation conditions

►Install the unit so that the object to be detected is within a measuring range of

0�03��2 m�

Any object between the set switch point and a distance of 20 m from the sensor is

suppressed�

Reflecting surfaces in the direct beam path of the sensor – also in

the range > 20 m – are to be avoided by the customer� Otherwise the

measured values can be ambiguous�

5 Electrical connection

The unit must be connected by a qualified electrician�

►The national and international regulations for the installation of electrical

equipment must be adhered to�

►Ensure voltage supply to EN 50178, SELV, PELV�

►Disconnect power�

►Connect the unit as follows:

DC PNP

2 1

L+

5: IN = Laser on / off

4: OUT1 = normally open / IO-Link

2: OUT2 = normally closed

Core colours of ifm sockets:

1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black), 5 = GR (grey)

6 Operating and display elements

1: LED yellow: Set value reached, output OUT1 = High (if OUT1 is congured as NO)

7 Settings / operation

The unit is set via the IO-Link interface. (→ 8 IO-Link)

On delivery the unit can also be used without IO-Link� Preset switch point: 2 m

►After installation, electrical connection and programming, check whether the

unit operates correctly�

Lifetime of a laser diode: 50,000 hours

7.1 Switch off the laser

For safety and maintenance purposes the laser of the unit can be temporarily

switched off via the input on pin 5�

Input signal at pin 5 Laser

Low / not connected On

High Off

8 IO-Link

8.1 General information

This unit has an IO-Link communication interface which requires an IO-Link-

capable module (IO-Link master) for operation�

The IO-Link interface enables direct access to the sensor values and parameters

and provides the possibility to set the parameters of the unit during operation�

In addition communication is possible via a point-to-point connection with a USB

adapter cable�

You will find more detailed information about IO-Link at www�ifm�com�

8.2 Device-specific information

You will find the IODDs necessary for the configuration of the IO-Link device and

detailed information about sensor values, diagnostic information and parameters

in the overview table at www�ifm�com�

8.3 Parameter setting tools

You will find all necessary information about the required IO-Link hardware and

software at www�ifm�com�

9 Maintenance, repair, disposal

Faulty sensors must only be repaired by the manufacturer�

►Keep the front lens of the sensor clean�

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations�

►Do not open the module housing� There are no user-serviceable components

inside�

Technical data and further information at www�ifm�com

Tabla de contenidos

Otros manuales de Accesorios de IFM

IFM

IFM MFH Manual de usuario

IFM

IFM O6H7 Series Manual de usuario

IFM

IFM LR3009 Manual de usuario

IFM

IFM PI109 Series Manual de usuario

IFM

IFM efector200 O6P2 Manual de usuario

IFM

IFM SBY2 Series Manual de usuario

IFM

IFM Efector 410 Guía de aplicación

IFM

IFM SI 5000 Manual de usuario

IFM

IFM O1D300 Manual de usuario

IFM

IFM SDP110 Manual de usuario

IFM

IFM Ecomat 100 EC2082 Guía

IFM

IFM SI 5000 Manual de usuario

IFM

IFM Efector 200 O7P2 Series Manual de usuario

IFM

IFM Efector600 TN2531 Manual de usuario

IFM

IFM OID20 Series Manual de usuario

IFM

IFM LW2720 Manual de usuario

IFM

IFM TS502A Manual de usuario

IFM

IFM PI28 Series Manual de usuario

IFM

IFM 402946 Manual de usuario

IFM

IFM Efector 200 OG Manual de usuario

IFM

IFM Efector 200 O5 Manual de usuario

IFM

IFM Efector 160 LR70 Manual de usuario

IFM

IFM KI0063 Manual de usuario

IFM

IFM PN3 Series Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario