IDS GeoRadar RockSpot Manual de usuario
Mod: MDM/011/M4 Rev 1
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
RockSpot
User Guide
October 2021
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
1Important Information about your Instrument
Read and follow the Quick Guide before using the product or the accessories delivered
with the product.
☞
Keep for future reference!
Intended use
The intended use is the real time detection of fast-moving geological event, such as
rockfall, debris flow, snow avalanche, etc. in one of the following possible environments:
•open pit mines and quarries
•natural landslides
•glaciers
•snowy slopes
•tailing dams.
The product must not be disposed with household waste.
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
Conformity to
European
regulations
This equipment is compliant with the essential requirements and other relevant provisions
of Directive 2014/53/UE.
The full Declaration of its Conformity can be found either on the CD or a separate document
included with this product.
This is a Class A product. In a domestic environment it may cause radio interference. If so, the
user may need to take adequate measures.
Conformity to
U.S regulations.
FCC Use limits
The RockSpot sensor is granted by FCC approved, according to the Code of Federal
Regulations, Title 47, Chapter I, Subchapter D, Part 90, Subpart F, Private land mobile radio
services; Radiolocation Service. In order to use the sensor in the US territory, a license of
utilization must be obtained by FCC. The license application can be submitted to the following
website: http://wireless.fcc.gov/uls/index.htm?job=home
Electronic
This product poses no health and safety risk when operated in the normal manner of the
intended use.
FCC statements:
. This device complies with FCC Part 15. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
. This device complies with Health Canada's Safety Code. The installer of this device
should ensure that RF radiation is not emitted in excess of the Health Canada's requirement.
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
Information can be obtained at http://www.hc-sc.gc.ca/ewh-
semt/pubs/radiation/radio_guide-lignes_direct-eng.php.
. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
.
. This product complies with FCC and ISED radiation exposure limits set forth for an
uncontrolled environment. The antenna should be installed and operated with minimum
distance of 30 cm between the radiator and your body.
Conformity to
Canada
regulations.
The RockSpot sensor is granted by ISED as a license exempt low power device, according to
RSS-210 Issue 10, Annex F, F.1. Operating band is 10.50-10.55 GHz, with a maximum EIRP of
32.7dBm. Within the above mentioned limitation in terms of band and emitted power,
ROCKSPOT can be used in Canada, without any license.
For more information about licensing procedure contact IDS GeoRadar personnel.
ISED Statements:
. Cet appareil est conforme FCC Partie15. Son utilisation est soumise Les deux
conditions suivantes: (1) cet appareil ne peut pas provoquer d'interfrences et (2) cet
appareil doit accepter Toute interfrence, y compris les interfrences qui peuvent causer un
mauvais fonctionnement du dispositif.
. Cet appareil est conforme avec SantCanada Code de scurit6. Le programme
d'installation de cet appareil doit s'assurer que les rayonnements RF n'est pas mis au-del
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
de I'exigence de SantCanada. Les informations peuvent tre obtenues: http://www.hc-
sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php
. Les changements ou modifications non expressment approuvs par la partie
responsable de la conformitpourraient annuler l'autoritde l'utilisateur utiliser cet
quipement.
. This device contains license-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation
is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme
aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorise aux deux conditions
suivantes:
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est
susceptible d'en compromettre le fonctionnement.
. Cet appareil est conforme aux limites d'exposition aux rayonnements de l’ISED pour un
environnement non contrôlé. L'antenne doit être installé de façon à garder une distance
minimale de 30 centimètres entre la source de rayonnements et votre corps.
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
Canadian Representative:
Company Name: Leica Geosystems Ltd
Company Number: 3177B
Company Address: 1-3761 Victoria Park Ave
City: Scarborough
Province/State: Ontario
Postal Code: M1W 3S2
Country: Canada
Contact Name: Sudha Sachdeva
Phone Number: +1 416 497 2463
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
1.1 Symbols
Warning messages are an essential part of the Safety Concept of the instrument. They appear wherever hazards or
hazardous situations can occur.
1.1.7
WARNING
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
1.1.8
DANGER
Indicates a potentially hazardous situation or an unintended use which, if not avoided, could
result in death or serious injury.
1.1.9
CAUTION
Indicates a potentially hazardous situation or an unintended use which, if not avoided, may
result in minor or moderate injury.
Supplementary safety information may be placed as notice message with the symbol indicated below.
Note text/to keep in mind.
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
2Hazard of use
NOTICE: Watch out for erroneous measurement results if the product has been dropped or has been
misused, modified, stored for long periods or transported.
Precautions:
Periodically carry out test measurements and perform the field adjustments indicated in the user
manual, particularly after the product has been subjected to abnormal use and before and after
important measurements.
NOTICE: If the accessories used with the product are not properly secured and the product is
subjected to mechanical shock, for example blows or falling, the product may be damaged.
Precautions:
When setting-up the product, make sure that the accessories are correctly adapted, fitted, secured,
and locked in position. Avoid subjecting the product to mechanical stress.
NOTICE: Only IDS GeoRadar authorized technical service are entitled to repair this product.
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
1.1.10
DANGER
During the setup and the use of the product, the user must take care of the danger
related to the environment surrounding the product, such as obstacles, excavations,
traffic etc…
Precautions
During the operations of the product, the user must be fully aware of the existing
dangers.
1.1.11
DANGER: During the setup of the product, the user must take care of the danger related
to installing and working at height.
Precautions:
During the installation and setup of the product, the user must be fully aware of the
existing dangers related to work at height such as the use of ladders, step-ladders, etc.
1.1.12
DANGER: Because of the risk of electrocution, it is dangerous to use poles and extensions
near electrical installations such as power cables or electrical railways.
Precautions:
Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2020/002 Rev. 1.1
1.1.13
DANGER: If the product is used with accessories, you may increase the risk of being struck by
lightning.
Precautions:
Do not use or maintain the product in a thunderstorm.
1.1.14
CAUTION: High mechanical stress, high ambient temperatures or immersion into fluids can
cause leakage, fire or explosions of the batteries.
Precautions:
Protect the batteries from mechanical influences and high ambient temperatures.
Do not drop or immerse batteries into fluids.
1.1.15
DANGER
Inadequate securing of the working site can lead to dangerous situations, for example in
traffic, on building sites, and at industrial installations.
Precautions:
Always ensure that the working site is adequately secured. Adhere to the regulations
governing safety and accident prevention and road traffic.
Keep at a safe distance from electrical installations. If it is essential to work in this
environment, first contact the safety authorities responsible for the electrical
installations and follow their instructions.
Otros manuales para RockSpot
1
Tabla de contenidos
Otros manuales de Radar de IDS GeoRadar
Manuales populares de Radar de otras marcas
SAW D2L
SAW D2L Valentine One Gen2 Manual de usuario
Raymarine
Raymarine Raytheon R20X Manual de usuario
Simrad
Simrad CA34 Manual de usuario
Endress+Hauser
Endress+Hauser Micropilot FMR67B Especificaciones técnicas
Endress+Hauser
Endress+Hauser Levelflex M FMP45 Manual de usuario
ECHOMAX
ECHOMAX Active-X-Band Manual de usuario
