IDRONAUT – Brugherio (MB) OCEAN SEVEN 315 On-Line Module 02-2015
Raw data – ADC Counts As a whole set of data acquired by means of the ADC and the
conditioning circuits, from the configured sensors and is expressed
in numeric decimal or hexadecimal format.
Non-verbose mode This term refers to a module that has been configured to use a
communication protocol (computer oriented) to communicate with the
operator.
Verbose mode This term refers to a module that has been configured to use the MMI
functions to communicate with the operator.
ON condition This term refers to a fully operative module, waiting for commands
from the operator or running the requested command.
OFF condition This term refers to a module electronically switched off. In this state,
the module draws negligible amount of current from the battery.
MMI This term refers to the set of common rules, which the operator must
follow during the operation of module in verbose mode.
FSK Frequency Shift Keying.
The following documents are available in the “Literature & Manual” folder on the CD-ROM distributed with
the OCEAN SEVEN 315 On-Line Module.
IDRONAUT Documentation pertaining the OCEAN SEVEN 315 On-Line Module
OCEAN SEVEN Module Data Transmission Protocol Description.
Please visit our website download area for software updates and technical support:
Software updates and technical support
http://www.idronaut.it
The OCEAN SEVEN 315 On-Line Module is covered by a one-year limited warranty that extends to all parts
and labour and covers any malfunction that is due to poor workmanship or due to errors in the
manufacturing process. The warranty does not cover shortcomings that are due to the design, nor does it
cover any form of consequential damage because of errors in the measurements. In case of problem with your
OCEAN SEVEN 315 On-Line Module, first try to identify the problem by following the procedure outlined in
the troubleshooting section of this manual. Please contact your representative or IDRONAUT if the problem
is identified as a hardware problem or if you need additional help in identifying the problem.
Warranty
Please make
sure to contact IDRONAUT to obtain the relevant instructions before the OCEAN SEVEN 315 On-Line
module or any module is returned to IDRONAUT (see cleaning instructions)
For systems under warranty, IDRONAUT will attempt to ship replacement parts before the malfunctioning
part is returned. We encourage you to contact us immediately if a problem is detected and we will do our best
to minimize the downtime. Every effort has been made to ensure the accuracy of this manual. However,
IDRONAUT makes no warranties with respect to this documentation and disclaims any implied warranties
of merchantability and fitness for a particular purpose. IDRONAUT shall not be liable for any errors or for
incidental or consequential damages in connection with the furnishing, performance or use of this manual or
the examples herein. The information in this document is subject to change without notice.
.
Before the returned OCEAN SEVEN 315 On-Line Module can be serviced, equipment exposed to biological,
radioactive, or toxic materials must be cleaned and disinfected. Biological contamination is presumed for any
instrument, module, or other device that has been used with wastewater. Radioactive contamination is
presumed for any instrument, module or other device that has been used near any radioactive source. If an
OCEAN SEVEN 315 On-Line module, or other part is returned for service without following the cleaning
instructions, and if in our opinion it represents a potential biological or radioactive hazard, our service
personnel reserve the right to withhold service until appropriate cleaning, decontamination has been
completed.
Cleaning Instructions
