iDevices Kitchen thermometer Manual de usuario
User Manual
Table of Contents
In the Box 3
Quick Start Instructions 3
Getting Started 4
iDevices Connected App 4
Battery Replacement 5
Powering On & Off 5
Connecting 6
Mounting 7
Probe Use 7
Probe Wrap Use 9
Using the Kitchen Thermometer 9
Display 9
Probe Toggle Buttons 10
Proximity Sensor 10
Custom & Preset Alarms 10
Renaming Probes 12
Timer Tool 13
Globe Tool 13
Graph Tool 13
Problem Solving 14
Frequently Asked Questions: 17
Disclaimer 19
Regulations 19
3
In the Box
Inside your Kitchen Thermometer box, you will nd:
• 1 Kitchen Thermometer
• 2 AA Batteries
• 2 Meat Probes
• 2 Probe Wraps
• 2 Colored Probe Indicators
• 1 Optional Magnetic Disc
• Quick Start Guide
Quick Start Instructions
1. Download the iDevices Connected app from the App StoreSM or
Google PlaySM Store on one of the following compatible devices:
• iPhone®(4S and later)
• iPad®(3rd generation and later)
• iPad mini™(all generations)
• iPod touch®(5th generation and later)
• Many Android™devices equipped with Bluetooth 4.0 and
running Android software version 4.3 or later
2. Enable Bluetooth®on your smart device under ‘Settings’.
3. Separate the Kitchen Thermometer from its base by rmly holding
the base with one hand and gently pulling the Kitchen Thermometer
top upwards with the other hand.
4. On the underside of the Kitchen Thermometer, depress and remove
the battery door. Insert the two supplied AA batteries with their
negative terminals compressing the springs and replace the battery
door.
4
5. Clip the Kitchen Thermometer top back into its base.
6. Plug one or more probes into the probe ports of the Kitchen
Thermometer.
7. Press the power button located at the bottom of the faceplate
between the < and > buttons for two seconds. The display will
animate and a single beep will sound, indicating that the Kitchen
Thermometer has powered on.
8. Open the iDevices Connected app to connect to your Kitchen
Thermometer. Tap on the iDevices logo in the gray toolbar at the
top of the app. Select your Kitchen Thermometer from the device
manager.
9. You are ready to use your Kitchen Thermometer!
Getting Started
iDevices Connected App
The iDevices Connected app provides all of the functionality and
customization you’ll need to get the most out of your Kitchen
Thermometer. The iDevices Connected app is compatible with the
following devices:
• iPhone®(4S and later)
• iPad®(3rd generation and later)
• iPad mini™(all generations)
• iPod touch®(5th generation and later)
• Many Android™devices equipped with Bluetooth 4.0 and running
Android software version 4.3 or later
You must be running iOS 7+ or Android version 4.3+ on your device to use
the iDevices Connected app. Please visit the App StoreSM or Google Play
StoreSM and search “iDevices Connected” to download the free iDevices
Connected app.
Once you’ve downloaded the app, you’ll have access to links
5
for instructional videos, step-by-step instructions and FAQ’s for
troubleshooting.
Battery Replacement
To replace your Kitchen Thermometer batteries, follow these steps:
• Separate the Kitchen Thermometer from its base by rmly holding
the base with one hand and gently pull the Kitchen Thermometer
top upwards with the other hand.
• On the underside of the Kitchen Thermometer, depress and remove
the battery door.
• Replace the two AA batteries with their negative terminals
compressing the springs and replace the battery door.
Powering On & Off
To turn on the Kitchen Thermometer, follow these steps:
• Press the power button located at the bottom of the faceplate
between the < and > buttons.
• The display will animate, and a single beep will be heard, indicating
it has powered on.
To turn off the Kitchen Thermometer, follow these steps:
• Press and hold down the power button located at the bottom of
the faceplate between the < and > buttons for three seconds. The
display will show “OFF”.
• Upon releasing the power button, the Kitchen Thermometer will
turn off.
Auto Shut-Off:
• The Kitchen Thermometer will stay powered on for ve minutes
before automatically turning off if there are no probes installed and
it is not paired to a smart device.
• The Kitchen Thermometer will stay powered on for eight hours
6
before automatically turning off if not paired to a smart device and
probes are installed.
• The Kitchen Thermometer will stay powered on indenitely if at
least one probe is installed and it is paired with a smart device.
Connecting
To connect your Kitchen Thermometer to your iPhone, iPad, iPod touch or
Android device follow these steps:
• Open Settings
• Tap Bluetooth
• Set Bluetooth to On
• While turned on, place your Kitchen Thermometer next to your
smart device and open the iDevices Connected app. Your smart
device will automatically recognize any available iDevices products
and display them in the device manager. You can view your device
manager by tapping the iDevices logo at the top of the app.
• Select your Kitchen Thermometer from the device manager. You
will then be sent a pairing request. Once you accept, your smart
device will pair with the Kitchen Thermometer and you are ready to
congure your settings and start cooking!
To connect an additional Kitchen Thermometer (or other iDevices product)
to your iPhone, iPad, iPod touch or Android device follow these steps:
• While turned on, place your Kitchen Thermometer (or other
iDevices product) next to your smart device and open the iDevices
Connected app.
• Tap on the gray bar located at the top of the screen to expose the
device manager. Select the product you would like to pair with
from the device manager. Your smart device will display a pairing
request. Once accepted, your smart device will pair with the
additional product and you are ready to congure your settings and
start cooking!
7
Mounting
• The Kitchen Thermometer’s base is magnetic for convenient
positioning on a cool portion of your oven, stove or other magnetic
surfaces.
• The Kitchen Thermometer can be taken out of its base, rotated
180°, and set back into its base for two different viewing angles.
• The Kitchen Thermometer comes with an optional magnetic disc
with an adhesive on one side. This allows the Kitchen Thermometer
to magnetically mount on a non-magnetic surface. The magnetic
disc has a protective cover on its face to protect it from being
scratched.
To mount your magnetic disc, please follow the below steps:
• Clean the surface thoroughly where the magnetic disc will be
adhered to ensure proper bonding.
• Remove the lm covering the adhesive on the magnetic disc.
• Adhere the magnetic disc to your desired surface.
• Let the magnetic disc bond to the surface for 6-12 hours before
mounting your Kitchen Thermometer to the disc.
• Place your Kitchen Thermometer on the magnetic disc.
The magnetic base is not designed to withstand high heat
and it must be placed on a cool surface. If the surface is too
hot to touch, it’s too hot for the Kitchen Thermometer base!
Probe Use
• Meat Probe Acceptable Temperature Range: -22°F to 572°F (-30ºC
to 300ºC).
• Pro Meat Probe and Pro Ambient Temperature Probe Acceptable
Temperature Range (sold on iDevicesinc.com): -22ºF to 700ºF (-30ºC
8
to 371ºC).
• The Meat Probes should always be inserted into the center of the
item being cooked for an accurate temperature reading.
• When using a standard Meat Probe, be sure to route the probe wire
where it will not be exposed to ames or temperatures exceeding
572° (300°C).
• The Pro Ambient Probe should be clipped between two grates
inside the oven. Ensure that the tip of the probe does not touch the
grates.
• The probe wraps allow convenient storage of your probes and
are magnetic so that they can be stored under your Kitchen
Thermometer when not in use.
The colored probe indicators are for visual identication of
the probe(s) within the app and cosmetic purposes only.
They are not designed for heat safety.
The probes should be cleaned by hand with a dishcloth,
standard dishwashing soap, and warm water. The probes are
not dishwasher safe. Take precaution not to get the probe’s
wiring wet.
Be sure to avoid water exposure to the probes’ wiring as
well as the area where the probes’ wiring meets the probes.
The probes are not waterproof and damage may result from
water exposure. The probes should never be submersed in
water.
Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the iDevices Connected app and
will cause the probe to disappear from connection.
9
Probe Wrap Use
To wrap your probe(s):
• Hold the probe wrap so that the clip segment is on the bottom left
and the iDevices logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap’s clip, ensuring that the probe’s
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointing downward.
• Wrap your probe’s wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the Kitchen
Thermometer
Display
The Kitchen Thermometer’s display contains the following:
Display
• Displays temperature of currently active probe.
• Displays “DC” for temperatures below -22°F (-30ºC).
• Displays “DH” for temperatures above 572°F (300ºC).
• Displays “OFF” during power off sequence.
• Animates during power on sequence and during reset.
Bluetooth LED
• Blinks blue when discoverable and awaiting pairing.
• Illuminates solid blue when paired.
Probe Indicator LED’s
10
• Left side LED illuminates to indicate Probe 1 temperature being
displayed.
• Right side LED illuminates to indicate Probe 2 temperature being
displayed.
Probe Toggle Buttons
The Kitchen Thermometer has two buttons adjacent to the power button
to toggle between the probes when there is more than one probe
connected.
• Pressing the < or > button will switch from the currently displayed
probe temperature (as indicated by the illuminated probe indicator
LED) to the next probe.
• Holding either the < or > button down for one second will activate
a cycle that will continuously cycle through displaying each probe’s
temperature.
• Pressing the <, >, or power button while the alternating display
cycle is activated will disable the display cycle.
Proximity Sensor
The use of Bluetooth®Smart allows the Kitchen Thermometer to sense
when a paired smart device moves in or out of range. The Kitchen
Thermometer will automatically wake and sleep at the below distances to
conserve power:
• Sleep ~ 30 feet away
• Wake ~ 5 feet away
Custom & Preset Alarms
Manage iPhone, iPad or iPod touch alarms:
If you are having issues hearing the alarms from the iDevices Connected
app, try these steps:
• Open Settings on your smart device
• Tap “Notication Center”
Otros manuales para Kitchen thermometer
2
Tabla de contenidos
Otros manuales de Termómetro de iDevices
iDevices
iDevices Kitchen Thermometer mini Manual de usuario
iDevices
iDevices IGRILL MINI Manual de usuario
iDevices
iDevices iGrill 2 Manual de usuario
iDevices
iDevices iGrill Manual de usuario
iDevices
iDevices Kitchen thermometer Manual de usuario
iDevices
iDevices IGRILL MINI Manual de usuario
iDevices
iDevices iGrill Manual de usuario
iDevices
iDevices Kitchen thermometer Manual de usuario
iDevices
iDevices iGrill Pro Manual de usuario
iDevices
iDevices IGRILL MINI Manual de usuario
