IDEAL 4107 Manual de usuario
1
123456789012345678901234567890121234567890
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
123456789012345678901234567890121234567890
GB Operating InstructionsDocument Shredders
IDEAL 4107
IDEAL 4107 CC
2
123456789
1
2345678
9
123456789
12345678901234567890
1
234567890123456789
0
1
234567890123456789
0
1
234567890123456789
0
12345678901234567890
IDEAL 4107
Children must not operate the machine!
Do not reach into the feed-opening of the cutting
head!
Do not cut hard materials or materials which may
splinter!
3
123456789012345678901234567890121234567890
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
123456789012345678901234567890121234567890
Table of contents
1. General ....................................................... 4
1.1 Safety Precautions ...................................... 4
1.2 pplication ................................................... 4
2. Installation ................................................... 5
2.1 Pre-assembly .............................................. 5
2.2 Power supply ............................................... 6
2.3 Checking rotating direction ......................... 6
3. Operation .................................................... 7
3.1 Operating elements ..................................... 7
3.3 Starting the machine ................................... 7
Machine stops due to overloading .............. 7
Stopping the machine ................................. 8
3.3 Switching off the machine ........................... 8
For short breaks: ......................................... 8
For longer breaks: ....................................... 8
3.4 Oiling the shredding mechanism ................. 8
3.5 Replacing the plastic bag ............................ 8
4. Trouble-shooting ......................................... 9
5. ccessories ............................................... 10
6. Technical data ........................................... 10
7. EC-declaration of conformity ..................... 11
4
123456789
1
2345678
9
123456789
12345678901234567890
1
234567890123456789
0
1
234567890123456789
0
1
234567890123456789
0
12345678901234567890
IDEAL 4107
1. General
This instruction manual will help you to learn the
safe and comfortable operation of this machine.
Please carefully read and observe the operating
instructions and safety instructions.
1.1 Safety Precautions
Danger!
Non-compliance with the instructions may
endanger persons.
Warning!
Non-compliance with the instructions may
cause damage to the machine.
The operating instructions must always be
a ailable for the operator.
ll components which may endanger the operator
are covered by a guard or have a door. ll panels
are screwed onto the machine. utomatic cut-off
when opening the door.
Operation by one person at a time only.
1.2 Application
The machine is constructed for shredding crumpled
paper, stacks of paper and cardboard boxes
(including staples).
Danger!
Children must not operate the machine.
Danger!
Do not shred any strapping materials or fluids
or materials which may explode, chemically
react or splinter.
Warning!
Feeding of big steel components, screws, nails
or hard components will damage the cutting
mechanism.
5
123456789012345678901234567890121234567890
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
123456789012345678901234567890121234567890
2. Installation
The machine is mobile on castors. The machine
must be installed on a sturdy, dry, and level floor.
Danger!
- The machine may not be installed outside.
- Do not use in the vicinity of flammable liquids
or gases.
- Do not use in humid environments.
- Protect the power cable from extreme heat,
oil, and sharp edges.
Warning!
- Do not cover the ventilation slits (3).
2.1 Pre-assembly
- Fix the side tables (4) and (5) to the machine.
6
123456789
1
2345678
9
123456789
12345678901234567890
1
234567890123456789
0
1
234567890123456789
0
1
234567890123456789
0
12345678901234567890
IDEAL 4107
2.2 Power supply
The name plate is located at the rear of the machine
or next to the electric mains.
- Data stated on the name plate
- Voltage "V",
- Frequency "Hz",
- Power consumption " "
must correspond to the values of the power supply
unit.
- Earth wire must be a ailable.
- Connect the machine to the mains.
2.3 Checking rotating direction
Operate the machine for a short time as described
under 3. "Operation".
- The material is transported to the shredding
mechanism by a conveyor belt.
When the conveyor belt runs in the opposite
direction:
The machine is wired according to the IEC
standardized rotary field. When changing the rotary
direction we recommend that this is performed by
an experienced specialist. The rotary direction is
changed by exchanging the "L1" and "L2"
connections in the plug.
Danger!
Incorrect exchanging of connections may
endanger the operator. If in doubt, this work
should be performed by an electrical specialist.
7
123456789012345678901234567890121234567890
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
123456789012345678901234567890121234567890
3. Operation
Danger!
- The machine may only be operated by
persons who have read and understood the
operating instructions.
- Do not reach into the running shredding
mechanism! The shredding mechanism
may cause serious injury!
- The machine will only run when the door is
closed.
3.1 perating elements
(1) Start
(2) Stop
(3) Reverse switch and lamp showing "bag full"
(4) Key switch
(5) Standby
(6) Mains switch
(7) Emergency-stop
3.3 Starting the machine
Danger!
Do not shred any material which may loop or
splinter. In case of danger, press emergency-
stop button (7).
- Turn mains switch (6) to position "I"
- Emergency-stop (7) pulled out.
- Turn key switch (4) on.
© Standby (5) illuminates.
- Press and release the black button (1).
© Conveyor belt is running.
- Distribute the paper over the total width of the
conveyor belt.
Machine stops due to overloading
- Remove any paper left on the conveyor belt.
Do not reach into behind the flap.
- Press and release the yellow key (3)
© Conveyor belt reverses.
- Feed less paper onto the conveyor belt.
- Start afresh.
Warning!
void continuous overloading of the machine.
8
123456789
1
2345678
9
123456789
12345678901234567890
1
234567890123456789
0
1
234567890123456789
0
1
234567890123456789
0
12345678901234567890
IDEAL 4107
Stopping the machine
- Press white button (2) or emergency-stop (7)
Do not reach into the running shredding
mechanism!
3.3 Switching off the machine
For short breaks:
- Press white button (2) © Conveyor belt stops.
For longer breaks:
- Turn main switch (6) to position "0". © The entire
machine shuts down.
- Turn key switch (4) and remove the key © Now
the machine is secured from unauthorized use.
3.4 iling the shredding mechanism
If the sheet capacity reduces or after the bag is
emptied we recommend that you oil the shredding
mechanism!
- Press the oilpump button 3 x.
- fter lubrication let the machine run several times
backwards and forwards alternately.
- If tank (8) is empty refill with oil.
Type of oil: cutting head oil
3.5 Replacing the plastic bag
Replace bag when "bag full" indicator lights.
- Open the door (9).
- Pull out the plastic bag holding the bottom of the
bag.
- Push down the waste paper.
- Pull out the waste bag with frame (10) until it
stops.
- Remove the round belt (11) from the waste bag
frame.
- Fasten the bag (wire twisting tool and wire ties see
accessories).
- Place a new bag into the bag frame (10) and turn
the edge over the outside of the frame.
- Fasten the bag with the round belt. The round belt
must fit into the channel of the bag frame.
- Push the bag frame into the machine and adjust
the plastic bag with your foot.
- Close the door (9).
9
123456789012345678901234567890121234567890
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
1
2345678901234567890123456789012123456789
0
123456789012345678901234567890121234567890
4. Trouble-shooting
Danger!
Disconnect from the mains before starting any
service work or before removing the cover.
Malfunction:
Standby (5) is not lighting up / machine does not
start.
Cause:
- Door open
- Main switch "0"
- Emergency-stop button is pressed
- Key switch is vertical
- Machine is plugged in
- On-site fuse
- Machine is overloaded - The motor protection
switch releases the machine after approx. 2
min.
Malfunction:
Motor hums and has no power.
Cause:
One phase is missing.
Remedy:
Ensure that voltage is on all 3 phases
Malfunction:
Machine switches off during normal operation.
a) Cause:
Indicator for "Bag full" lights
© Shred bag is full.
Remedy:
Renew plastic bag.
b) Cause:
Machine is overloaded to frequently.
Remedy:
Check on-site fuse
Motor protection switch releases the machine after
approx. 2 min.
10
123456789
1
2345678
9
123456789
12345678901234567890
1
234567890123456789
0
1
234567890123456789
0
1
234567890123456789
0
12345678901234567890
IDEAL 4107
5. Accessories
Plastic bags 350 l (50 pieces) ............... 9000 412
Cutting head oil 10 x 0,2 l ..................... 9000 610
For fastening plastic bags:
Wire twisting tool for one-way
plastic bags ........................................... 9000 591
Wire ties for one-way plastic bags
(1000 pieces) ........................................ 9000 592
Attention!
Only use manufacturer recommended
accessories.
6. Technical data
The exact technical specifications can be found on
the technical specifications sticker on the machine.
Noise level < 70 dB( ).
Fuse protection 400 V with 16 .
Fuse protection 220 V with 20 .
If you have further questions please contact your
dealer or directly on the internet www.ideal.de
© "Service" ser ice@krug-priester.com.
Subject to alterations without notice.
IDEAL
"Service"
Otros manuales para 4107
4
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Trituradora de papel de IDEAL
IDEAL
IDEAL 2604 Manual de usuario
IDEAL
IDEAL 2402 Manual de usuario
IDEAL
IDEAL IDEAL 5009-1 Manual de usuario
IDEAL
IDEAL 2604 Manual de usuario
IDEAL
IDEAL 2445 CC Oil Manual de usuario
IDEAL
IDEAL Shredcat 8260 CC Manual de usuario
IDEAL
IDEAL DSH0064 Manual de usuario
IDEAL
IDEAL 2604 Manual de usuario
IDEAL
IDEAL 2501 Manual de usuario
IDEAL
IDEAL 2265 Manual de usuario
IDEAL
IDEAL SHREDCAT 8220 CC Manual de usuario
IDEAL
IDEAL 0201 OMD Manual de usuario
IDEAL
IDEAL IDEAL 4000 Manual de usuario
IDEAL
IDEAL 1 Manual de usuario
IDEAL
IDEAL 2240 Manual de usuario
IDEAL
IDEAL IDEAL 4605 Manual de usuario
IDEAL
IDEAL 2603 cross/cut Manual de usuario
IDEAL
IDEAL SHREDCAT 8220 CC Manual de usuario
IDEAL
IDEAL 2604 Manual de usuario
IDEAL
IDEAL IDEAL 4605 Manual de usuario
Manuales populares de Trituradora de papel de otras marcas
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Manual de instrucciones
GBC
GBC ShredMaster CC055 Manual de usuario
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manual de usuario
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manual de usuario
Rexel
Rexel Optimum AutoFeed+ 45X Manual de usuario
Martin Yale
Martin Yale 227284S1 Manual de usuario
