Icop VDX-6329 Manual de usuario

VDX-6329/ VDX-6329-512

DM&P Vortex86DX 800MHz

3.5” CPU Module

with 6S/2USB/VGA/LCD/AUDIO/2LAN/CF/FDD

256MB DDR2 Onboard

User’s Manual

(Revision 1.1A)

The information in this manual is subject to change without notice for continuous improvement in

the product. All rights are reserved. The manufacturer assumes no responsibility for any

inaccuracies that may be contained in this document. And makes no commitment to update or to

keep current the information contained in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,

in any form or by any means without the prior written permission of the ICOP Technology Inc..

Manual No. IUM6329000-01 Ver.1.0A April, 2010

Manual No. IUM6329000-01 Ver.1.1A August, 2010

Trademarks Acknowledgment

Vortex86DXis the registered trademark of ICOP Technology Inc.

Other brand names or product names appearing in this document are the properties

and registered trademarks of their respective owners. All names mentioned herewith

are served for identification purpose only.

T a b l e o f C o n t e n t s

T ab l e o f C o n t e nt s.............................................................iii

C h a p t e r 1 Introduction……………………………………………1

1.1 Packing List............................................................1

1.2 Product Description................................................2

1.3 Specifications.........................................................3

1.4 Board Dimension....................................................5

C h a p t e r 2 Installation……………………………………………..6

2.1 Board Outline.........................................................6

2.2 Connectors & Jumpers Location............................7

2.3 Connectors & Jumpers Summary...........................9

2.4 PinAssignments & Jumper Settings......................11

2.5 System Mapping...................................................24

2.6 Watchdog Timer...................................................27

2.7 GPIO....................................................................28

2.8 SPI flash...............................................................29

2.9 IDE to SD.............................................................30

C h a p t e r 3 Driver Installation……………………………………31

Appendix ………………………………………………………………..32

A. TFT Flat Panel Data Output......................................32

B. TFTFlat Panel Support List.......................................33

C. LVDS Flat Panel Support List....................................35

D. Flat Panel Hardware Setting.....................................36

E. Flat Panel Wiring and Lighting..................................37

F. TCP/IPlibrary for DOS real mode..............................38

G. BIOS Default Setting.................................................39

Warranty............................................................................................40

Vortex86DX-6329 Vortex86DX3.5” CPU Module

C h a p t e r 1

Introduction

1.1 Packing List

Product Name Package

VDX-6329

VDX-6329-512

Embedded Vortex86DX CPU All-in-One Board

Manual & Drivers CD x 1

RS232 cable x 6

PRINT cable x1

IDE cable x 1

VGA cable x 1

Audio cable x 2

FDD cable x 1

USB cable x 1 (USB port x 2)

LAN cable x 2

PS/2 Mouse cable x 1

PS/2 Keyboard cable x1

Vortex86DX-6329 Vortex86DX3.5”CPUModule 2

1.2 Product Description

The VDX-6329 family of low-power x86 embedded controlleris designed to meet 3.5”

specification, and integrated with the following features.

800MHz Vortex86DX System-On-Chip

VGA, TFT/LVDS LCD support up to

1280x1024 resolution

256/ 512MB DDR2 system memory

Enhanced IDE (UltraDMA-100/66/33)

10/100Mbps Ethernet x2

2 USB 2.0 (Host)

Up to 6 serial ports

Parallel port

Onboard 4MB SPI Flash

x-PCI expansion bus

Meet PC/104 stacking spec.

2 watchdog timer

JTAG interface

AMI BIOS

Single voltage +5V DC

Support extended operating

temperature range of -20°C to +70°C

The VDX-6329 3.5” family of embedded controller is designed with backward compatibility in

mind, to provide migration path for projects facing end-of-life challenges with their existing x86

based 3.5” controller.The VDX-6329 family of controller is designed as a plug in replacement,

with backward compatibility to support legacy software to help extend existing product life cycle

without heavy re-engineering.

VDX-6329 is suitable for broad range of data-acquisition, Industrial automation, Process

control,Automotive controller,AVL, Intelligent Vehicle management devic,Medical device,

Human machine interface, Robotics, machinery controlAnd more…application that required

small footprint, low-power and low-cost hardware with open industry standard such as 3.5 ”.

Vortex86DX-6329 Vortex86DX3.5” CPU Module 3

1.3 Specifications

Features VDX-6329

CPU DM&P SoC CPU Vortex86DX- 800MHz

Real Time Clock with Lithium Battery Backup

Cache L1:16K I-Cache, 16K D-Cache, L2 Cache 128KB

BIOS AMI BIOS

Bus Interface PC/104 Standard Compliant

32-bit x-PCI interface, compatible with PCI Rev.2.1

System Memory 256/ 512MB DDR2 Onboard

Watchdog Timer Software programmable from 30.5 us to 512 seconds x2

sets(Watchdog 1 fully compatible with M6117D)

VGA XGI Volari Z9s Chipset

VGA and TFT Flat Panel Interface Support

LVDS Flat Panel Interface Support

Onboard 32MB VGA Memory

Support resolution up to 1280 x 1024,16MB colors

LAN Realtek 8100B 10/100Mbps Ethernet Controller

Half/Full duplex capability

Audio CM119 USB Audio controller

I /O Interface Enhanced IDE port (UltraDMA-100/66/33) x1

FDD port x1

RS-232 port x5

RS-232/422/485 port x1 (RS-485:Auto Direction)

Parallel port x1

USB port x2 (USB 2.0 version)

10/100Mbps Ethernet port x2

Connectors 2.54mm 5-pin box header for Keyboard x1

2.54mm 5-pin header for Mouse x 1

2.54mm 3-pin header for RS-485 x1

2.54mm 2-pin header for Reset x1

2.54mm 4-pin header for DC-in x1

2.00mm 44-pin box header for IDE x1

2.00mm 44-pin box header for LCD x 1

2.00mm 34-pin box header for FDD x1

2.00mm 26-pin box header for Printer x1

2.00mm 10-pin box header for RS-232 x6

2.00mm 10-pin box header for USB x1

2.00mm 10-pin box header for VGA

2.00mm 8-pin header for LAN x 2

2.00mm 4-pin wafer for Line-out/MIC-in x 2

1.25mm 6-pin wafer for JTAG x1

Type I/II Compact Flash slot x1

Vortex86DX-6329 Vortex86DX3.5” CPU Module 4

Flash Disk Support

Onboard 4MB SPI Flash Disk (Driver: A)

44-pin IDE Flash Disk( EmbedDisk 16MB or above)

Type I/II CF Card

44-pin IDE to Micro SD (Optional)

SRAM support 512KB (Optional)

Power Requirement Single Voltage +5V @ 800mA

Dimension 102 X 144mm (4.01 x 5.67 inches)

Weight 150g

Operating

Temperature -20oC ~ +70oC

-40°C ~ +85°C (Optional)

Vortex86DX-6329 Vortex86DX3.5” CPU Module 5

1.4 Board Dimension

Vortex86DX-6329 Vortex86DX3.5” CPU Module 6

C h a p t e r 2

Installation

2.1 Board Outline

(Note1: COM2 RS232/422/485 is selected by BIOS setting)

(Note2: J39 Default setting of JTAG Has to be Disable: Pin 1 & Pin 2 short)

(Note3: VDX-6329-512 is optional)

Vortex86DX-6329 Vortex86DX3.5” CPU Module 7

2.2 Connectors & Jumpers Location

Connectors

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de Icop

Icop

Icop VDX-6328RD Manual de usuario

Icop

Icop VSX-6114-V2 Manual de usuario

Icop

Icop VDX2-6526 Manual de usuario

Icop

Icop VDX3-6726-V2 Manual de usuario

Icop

Icop SOM304D3 Manual de usuario

Icop

Icop QEC-M-01 Manual de usuario

Icop

Icop IBW-6954 Manual de usuario

Icop

Icop VSX-6154 Manual de usuario

Icop

Icop VSX-6116-V2 Manual de usuario

Icop

Icop QEC-M-090T Manual de usuario

Icop

Icop QEC-M-070T Manual de usuario

Icop

Icop VEX-SOM Manual de usuario

Icop

Icop VEX2-6415 Manual de usuario

Icop

Icop VEX2-6454 Manual de usuario

Icop

Icop VEX-6254 Manual de usuario

Icop

Icop VDX-6326RD-NF Manual de usuario

Icop

Icop VSX-6124 Manual de usuario

Icop

Icop VDX-6318RD Manual de usuario

Icop

Icop VSX-6115-V2 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario