ICON CubePro-VST Manual de usuario
User manual
4-In / 4-Out Recording USB Interface
Important Safety Instructions
1. Read this manual thoroughly before using this unit.
2. Keep this manual for future reference.
3. Take notice of and comply with all warnings included in the user's manual or indicated on the
appliance.
4. Follow all instructions included in this manual.
5. Do not expose this unit to rain or moisture. Avoid having water or other liquids spilled on this
unit.
6. When cleaning the cabinet or other parts of this appliance, use only a dry or slightly damp soft
cloth.
7. Do not block any ventilation openings or interfere with the proper ventilation of this unit. Install
in accordance with the manufacturer's instructions.
8. Do not use or store near any heat sources such as radiators, heat registers, stoves, or other heat-
producing appliances.
9. Do not interfere with the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. These are designated for your safety. If the provided plug does not fit into your
outlet, consult an electrician.
10. Protect the power cord from being walked on or otherwise damaged by items placed on or
against them. Particular attention should be given to the plugs, receptacles, and the point where
the cord exits the appliance.
11. To avoid the risk of electrical shock, do not touch any exposed wiring while the unit is in
operation.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this unit and all connected electrical equipment during lightning storms or when left
unused a long period of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the appliance has
been damaged in any way or fails to operate normally.
WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture
Introductions.............................................................................................4
What’s in the package? ............................................................................4
Features ...................................................................................................5
Front Panel ..............................................................................................6
Rear Panel................................................................................................7
Mac driver installation...............................................................................8
Mixer control panel .................................................................................10
Windows driver installation..................................................................... 11
ProDriver VST ........................................................................................14
Mixer control panel .................................................................................15
Settings (Sample rate and latency settings)...........................................17
ProDriver VST hosting rack....................................................................21
Hardware Connections...........................................................................22
Specications .........................................................................................23
Services..................................................................................................24
Contents
4
Introductions
What’s in the package?
Thank you for purchasing the ICON CubePro-VST digital audio Interface. We
sincerely trust this product will provide years of satisfactory service, but if anything is
not to your complete satisfaction, we will endeavor to make things right.
In these pages, you'll nd a detailed description of the features of the CubePro-VST
digital audio interface, as well as a guided tour through its front and rear panels,
step-by-step instructions for its setup and use, and full specications.
You'll also nd a warranty card enclosed---please don't forget to ll it out and mail it
so that you can receive online technical support at: www.iconproaudio.com. And
so we can send you updated information about these and other ICON products in
the future. As with most electronic devices, we strongly recommend you retain the
original packaging. In the unlikely event the product must be returned for servicing,
the original packaging (or reasonable equivalent) is required.
With proper care and adequate air circulation, your CubePro-VST digital audio
interface will operate without any trouble for many years. We recommend that you
record your serial number in the space provided below for future reference.
Please write your serial number here for future reference:
Purchased at:
Date of purchase:
●CubePro-VST USB Recording Interface
●Quick Start Guide x 1
●Driver Software CD
Different language electronic user manual & quick start guide (pdf)
●DAW software – Reaper & KiloHearts VST
●USB 2.0 cable x 1
5
Features
●24-Bit 192KHz 4-In/4-Out USB Recording Interface
●High dynamic range:
DAC: Dynamic Range: 114dB
ADC: Dynamic Range: 114dB
●4x4 analog I/O full duplex recording and playback
●4 analog inputs and 4 analog outputs on 1/4” TRS jacks
●Master volume control on the front panel
●1 headphone output with assignable source and individual volume control
●Flexible channel routing via the software control panel
●ICON innovative ProDriverVST™ VST plug-ins hosting rack is provided
●Different VST plug-ins are provided
●USB2.0 High Speed equipped and USB bus-powered
●Supports DirectSound, WDM and ASIO2.0
●Compatible with Mac OS (Intel-Mac), iOS 9 or above and Windows 7, 8 & 10
(32-bit/64-bit)
●Full duplex, simultaneous record/playback
●+5VDC power supply connector is equipped for external power supply when using
with iOS
●Rugged aluminum construction
The ICON CubePro-VST USB recording interface provides an audio input and output
module with USB connectivity. Main features include:
6
Front Panel
1. Line Inputs 1-4
These are unbalanced analog inputs on standard 1/4" TS connectors at
-10dB line level.
2. Master level control
This potentiometer controls the master output level of the analog outputs.
3. Headphone level control
This potentiometer controls the output level of the headphone output.
4. Headphone output
This output jack accepts a standard 1/4″ stereo TRS headphone connector.
1 2 3 4
7
Rear Panel
1. USB 2.0 Connector
Connect it with the provided USB cable to your Mac/PC/iOS device camera kit’s
USB connector. Your Mac/PC must have a USB2.0 connector in order to run the
full speed of CubePro-VST.
2. Line outputs 1-4
These are unbalanced analog outputs on standard 1/4″ TS connectors at +6dBU
line level.
3. Power supply connector
CubePro-VST is USB bus powered. If your computer does not supply sufcient
power, connect an ICON +5VDC power supply adapter to this jack or use a
standard phone charger/power adapter with the correct USB cable.
(Note: You can get the power adapter from ICON Distributors/dealers near you.)
23 1
8
Mac driver installation
CubePro-VST is a class compliance device. Thus there is no driver installation
needed for Mac. Also, it is fully supporting iOS devices by connecting to a
camera kit.
Please follow the step-by-step procedures below to install your CubePro-VST USB
recording interface.
1. Turn on your Mac
(Note: Do not connect the CubePro-VST digital audio interface to your Mac yet.)
2. Class compliance device
CubePro-VST is class compliance on Mac OSX, no driver installation is needed.
3. Copy the software control panel shortcut logo to your
desktop
Open the previous “Mac” folder. Copy the “ProDriver VST” software panel
shortcut logo and paste it to your desktop.
4. Launch the software control
panel
Click the CubePro-VST’s software
control panel shortcut logo you have
just copied to your desktop to launch
the software control panel.
Diagram 1
Mac
Diagram 2
9
5. Connect your CubePro-VST
digital audio interface
Now connect the CubePro-VST
digital audio interface to your Mac's
USB port.
Note: CubePro-VST audio interface
only support USB2.0. Your Mac must
have a USB2.0 port.
Diagram 4
CubePro VST (Core Audio) CubePro VST: Output
CubePro VST (Core Audio)
CubePro VST (Bit Accurate)
6. Audio MIDI setup
Open the “Audio MIDI setup”
window and check if the CubePro-
VST device has setup properly as
shown below in diagram 4.
Diagram 3
Cube4 Nano VST
13
13
14 15
USB
Esc
F1 F2 F3 F4
F5
F6
F7 F8 F9 F10 F11 F12
Prtsc
sysrq
pause
Break
Lns
Del
Home
Pgup
PgDN
End
$
~
`
！
1
··
23456778 90
）
）
*—
-
+
=
#￥%
*
##
QWERTYUIOP{}|
ASDFGHJKL:
;
ZXCVBNM<>?
Tab
CapsLook
Shift
Ctrl Alt AltGr Ctrl
Backspace
[
]
|
Enter
Shift
intel
USB
Mac
10
Diagram 5
1. HW Input 1/2 level metering
Showing the hardware 1/2 input level. (HW In 1/2).
2. HW Output 1/2 level metering
Showing the hardware 1/2 output level.(HW Out 1/2).
3. HW Input 3/4 level metering
Showing the hardware 3/4 input level. (HW In 3/4).
4. HW Output 3/4 level metering
Showing the hardware 3/4 output level.(HW Out 3/4).
5. Link switch
Switch to adjust both channels level simultaneously.
6. Mute switch
Switch to mute the corresponding channel.
7. “0dB” switch
Switch to instantly adjust the corresponding channel to “0dB” level.
8. Gain control fader
Slide to adjust the gain level for the corresponding channel.
9. Inputs & Outputs Matrix switches
Switch to turn On/Off the corresponding input channel route to the corresponding
output channel. The matrix is very useful and makes your inputs and outputs very
exible. You may route any of your input(s) to any output(s)
.
Mixer control panel
The mixers work like a matrix mixer. Activate and adjust the corresponding input or output
channel level. They are very useful and make your inputs and outputs very exible. You may
route any of your input(s) to any output(s).
4
5
6
7
2
1
3
8
9
Tabla de contenidos
Otros manuales de Interfaz USB de ICON
Manuales populares de Interfaz USB de otras marcas
PASCO
PASCO SCIENCEWORKSHOP 750 Manual de usuario
Phonic
Phonic FIREFLY 302 USB Manual de usuario
OHAUS
OHAUS Scout STX Series Manual de usuario
Denon
Denon DN-HC4500 - DJ Mixer USB Controller Manual de usuario
Lutron Electronics
Lutron Electronics Stanza SZ-CI-USB-CPN5138 Manual de usuario
Paradox
Paradox PMC5-TI00 Manual de usuario
Thorsis Technologies
Thorsis Technologies isDNet USB Manual de usuario
Thorsis Technologies
Thorsis Technologies isHRT USB Manual de usuario
microHAM
microHAM DigiKeyer Manual de usuario
Apogee
Apogee Jam X Manual de usuario
RigExpert
RigExpert TI-3000 Manual de usuario
microHAM
microHAM USB Interface II Manual de usuario