icetro ISI-161TH Manual de usuario
Ice Cream Machines
User's Manual
* This product is designed for indoor use.
* Make sure to install it indoors.
* The appearance, design, color, and parts of the product
are subjected to change without prior notice.
ISI-161TH
2
Ice Cream Machines offers the following advantages
1. Slim line soft Ice Cream Machines
Easy to install thanks to the compact form factor in Korea and slim body.
2. Minimised noise & Vibration cooling system
3. MICOM control system
4. Pasteurization function
5. Defrost function
7. Convenient washing system
8. Inverter system application(Taste & Texture control system)
6. Ergonomic button used premium LCD display panel
With a high efficiency and low noise motor, we can achieve minimal noise
from the refreshing cooling system.
Use of an artificial intelligence control system achieves an optimal cooling system.
A low-temperature pasteurization process is implemented for heating products at 68℃
for 30 minutes to supply sanitary ice cream products the spoilage of materials.
The soft ice cream inside the cylinder can be defrosted to liquids.
Water valve are directly connected to the body of machine pasteurization
functions allows boiling water when cleaning the cylinder and the mix hopper
to facilitate the cleaning of the system.
By allowing separate speed controls for producing and projecting soft ice-cream,
you can have the best ice cream quality.
Push button design for easy operation.
3
Thank you very much for purchasing a Ice Cream Machines made by ICETRO. For correct use of the product
and its maintenance, please read this manual carefully. If a problem occurs while using the product,
you can refer to this manual for troubleshooting. This manual contains a product warranty, so keep it safely
for future reference. This product can be installed only by someone qualified for installation.
If use of parts and accessories not provided or approved by ICETRO or any part or accessories made by ICETRO
but remodeled by other person causes a problem, we are not responsible for if financially.
(The functions and specifications shown in this manual and on the web site are subject to change without notice.
Please visit our website at http://www.icetro.com to obtain the latest specifications
Cautions for your safety ............................................................................................
Name of each part ....................................................................................................
Product specification ...............................................................................................
Check prior to use ...................................................................................................
Button display names and functions ........................................................................
Description of the functional buttons ........................................................................
Explanation of the button function ............................................................................
Making soft ice cream .............................................................................................
How to pasteurize the soft ice cream .......................................................................
How to make the soft ice cream look better .............................................................
Soft ice cream discharging speed control .................................................................
Adjustment method for carburetor ...........................................................................
Cleaning method .....................................................................................................
Unpacking and Installation .......................................................................................
Installation ................................................................................................................
Dasher and dasher cover assembly method ............................................................
How to upgrade the program ..................................................................................
How to use USB downloader ....................................................................................
Wiring diagram .........................................................................................................
Refrigeration circuit diagram ....................................................................................
Cautions for operation of soft ice cream machine ....................................................
Before requesting service .........................................................................................
Replacement cycle of consumable parts ..................................................................
Error Codes and Corrective Actions ..........................................................................
Part list ...................................................................................................................
Warranty .................................................................................................................
Dear customers
4~8
9~10
11
12
13
14~18
19
20
21
22
23
24
25~27
28
29
30
31
32
33
34
35
36~37
37
38
39~44
45
Contents
4
Cautions for your safety
The caution/warning details for safety are intended to prevent accident or danger through
safe and proper use. Therefore please follow the details accordingly.
The precaution details are categorized into warning and caution, and the respective
meanings are as follows.
This means that it can cause death or major injury
when the details are violated.
If you neglect this symbol and wrongly use the product,
it may cause a fire, serious injury or death.
Warning
Danger
Caution This means that it can cause injury or house/
property damage when the details are violated.
※ Personal Injury: Minor cuts, burns (high or low temperature) or electric shocks
that do not need hospitalization or long-term hospital visiting.
※ Property Loss: The loss on houses, household goods, livestock, bedding, and such.
[Each symbol has the following meanings]
This symbol means that it can be dangerous in specific conditions.
This symbol means never to do the described action.
This symbol means not to touch specific parts with bear hands.
This symbol means to unplug the power from the outlet.
Must be grounded.
This symbol means not to disassemble the product.
This symbol means to be careful because there is a possibility
of electric shock.
5
Do not disassemble or
alter the product.
Electric shock, fire or
injury may occur.
Call an expert for repair.
Imperfect repair may cause fire,
electric shock or injury.
For relocation of the product, call an expert.
The product may cause such hazards as
falling down unless properly installed.
It should be installed in accordance with related
regulations such as the road and traffic act,
the fire fighting act and the food sanitation act.
※ Call your distributor.
※ : If you think the product needs
repairing, call your distributor.
Keep a heating device away
from the power cable.
A heating device may melt
down the coating of the
power core, resulting
in fire or electric shock.
Do not put anything on
the power cable.
Make sure that the power cable
is not twisted or knotted.
Fire or electric shock
may occur.
Stop using the machine,
if you find the power cable,
or any other cable to be
defective.
Fire or electric shock
may occur.
Do not inject inflammable
material such as benzene,
gasoline, paint thinner or
LP gas into the product
or keep it close to product.
Explosion, fire or injury
may occur.
Do not spray with an
insecticide,
flammable spray or perfume
near the product.
Fire or electric shock
may occur.
Oh! NO
Oh! NO
If the power cable needs
replacement or repair, call a
service center or an expert.
Before you clean the inside
of the product, unplug the
earth leakage breaker
wearing rubber gloves.
Electric shock or injury may
result.
This product shows
the optimal performance
at temperature of 10~38℃
Label
Warning
Caution
Keep your warning and caution
labels clean for easy legibility.
If the user misunderstands
the content of such a label,
an accident may occur.
T
hinner
Gas
Ga
sol
in
e
6
User’s
Manual
Do not touch any moving part
inside the product.
You may get injured.
Stop operating the product if
you hear any unusual noise
or smell or if you see smoke
coming out from the product.
If you continue to operate the
machine in such condition,
fire or electric shock may
result.
Do not touch the power
cable or any elctric part
with wet hands.
Explosion, fire or injury may
occur.
Do not climb onto the product
or shake or tilt it.
The product may fall down
or develop a problem.
When you replenish ice cream
raw materials, do not allow rain
or snow to get into any interior
electric part.
Defective operation may occur.
When you dispose of the
product, consult a disposal
expert.
An accident may result unless
it is properly disposed of.
※ Call your distributor.
Make sure that no electric part
has come into contact with water.
If the product was immersed
in water by a flood, call a service
center for a check. Otherwise,
fire or electric shock due to
electric leakage may occur.
If you sell or hand over the product,
make sure to hand over the
user’s manual with it.
Without the manual, an accident may
occur because of erroneous
handing or operation.
7
Never operate the lever
during sterilization or
defrosting.
Hot material cna be discharged
and it may cause burns.
While operating the product,
please close mix cover
completely.
Bugs or alien substances
can enter the product.
Do not install it on a tilt.
It can cause physical injury
or product damages.
Do not apply excessive force
or impact to the product.
It can cause damages to
the product.
Do not use or store inflammable
gas or material near the product.
It can cause electrical
shocks or fire.
Do not install it near dust,
moisture or rainwater(water)
popping.
It can cause electrical
shocks or fire.
Don’t let an uneducated
person or a child touch
or operate the machine.
The machine can be
damaged, or an injury
may occur.
The damage will go to
the machine or there is
a possibility of injury.
To have good soft icecream,
it is recommended to pasteurize
or clean it everyday.
Otherwise, the ingredients
can deday.
If sterilization is not done
every day, you are recommen
ded to clean it every day.
Do not place water containers,
medicine, foods, small metal
parts or inflammable material
on top of the product.
If they go inside the product,
it can cause electrical shocks,
fire and damages.
Do not place any obstacle at
the entrance of the air vent.
It may cause the degradation
of functionality.
Please do not press“WASH”button
during empty condition which the cylinder
doesn’t contain any ingredients or water.
The bearing of drum can be frayed
because there is no lubrication.
EVERYDAY
8
ON
OFF
OFF
FOF
If you want to leave it unused
for a long time, then close the
water supply valve and
turn off the earth leakage
circuit breaker.
Injury may occur
if it falls over.
Do not turn the power ON/
OFF with the circuit breaker
continuously.
It can cause electrical shocks
or fire.
Do not arbitrarily connect
the power cord or process
it for use.
It can cause fire.
Do not touch the earth leakage
circuit breaker with your wet
hands.
It can cause electrical shocks or
fire.
Do not place candle lights
or cigarettes light on top of
the product.
It can cause fire.
Do not connect many electrical
products to the earth
leakage circuit breaker.
Use it individually.
It can cause fire.
ON
OFF
If there is water inside the
power supply, turn off the
earth leakage circuit breaker
and dry it before use.
It can cause electrical shocks
or fire.
9
Name of each part
FRONT
LEFT SIDE RIGHT SIDE
300 A WATER FAUCET
MIX TANK COVER
AIR VENT
BUTTON DISPLAY
DASHER COVER
DASHER COVER
BOLT
DRAIN BOX
AIR FILTER
USB PORT
LEVER
775
(854)
618
750
(871)
10
DASHER LUG POM
PACKING DASHER COVER
PACKING CARBURETOR
PACKING PISTION
CARBURETOR TUBE
CARBURETOR
TUBE BODY
HOSE
MANUAL
HINES
ATTACHMENTS
1EA
1EA
1EA
6EA
1EA
1EA
1EA
1EA
2EA
BRUSH DRUM
BRUSH COVER
BRUSH 3
1EA
1EA
1EA
1EA
BRUSH CARBURETOR OUT
1EA
UNION 1/2 PACKING REMOVE HANDLE
1 EA
BEARING DASHER
1EA
Tabla de contenidos
Otros manuales de Máquina para hacer helados de icetro
icetro
icetro SSI-300T Manual de usuario
icetro
icetro ISI-273SH3S Manual de usuario
icetro
icetro ISI-163TT Manual de usuario
icetro
icetro SSI-303SN Manual de usuario
icetro
icetro ISI-321TA Manual de usuario
icetro
icetro ISI-271SHSN Manual de usuario
icetro
icetro ISI-271THS Manual de usuario
icetro
icetro ISI-271THN Manual de usuario
icetro
icetro SSI-141TG Manual de usuario
icetro
icetro SSI-143S Manual de usuario
