IBM FC 5026 Manual de usuario
IBM Installation Instructions
Field Feature Bill of Material
PN 29H4179
Exchange Hard Disk Drive (FC 5026)
on Service Processor Type 9577 or 9585
on IBM 3745 Model XXA or 3746 Model 9X0
Written by: J. Michaut
Checked by: J. Thabourin
Approved by: A. Badino
Reviewed by: B. Kelly
3746 PN 29H4179 EC D55911A EC E46709
FFBM 1 of 24 08 DEC 95 16 MAY 97
Copyright IBM Corp. 1995 1
IBM Installation Instructions
3746 PN 29H4179 EC D55911A EC E46709
FFBM 2 of 24 08 DEC 95 16 MAY 97
2
IBM Installation Instructions
Before Installation (Steps 1-8)
1.0 Machines Affected
3745 Model XXA or 3746 Model 9X0 with:
Feature
Code Designation
5020 Service Processor type 9577, or
5021 Service Processor type 9585 (Only).
This feature should only be applied on the machine serial for which it is specified
.
2.0 Related BMs and ECs
None.
3.0 BMs to be Installed
FFB/M Title
29H4179 Exchange Hard Disk Drive (FC 5026)
4.0 Preparation
Familiarize yourself with the purpose and details of the installation instruction
before negotiating machine time with the customer.
Check all items listed on the BM(s) to determine that all parts have been
received.
Get the up-to-date backup copy of the Service Processor Reference Diskette
and LIC Backup Optical disk.
The exchange of the Hard Disk Drive on Service Processor has no impact on
customer operations.
3746 PN 29H4179 EC D55911A EC E46709
FFBM 3 of 24 08 DEC 95 16 MAY 97
3
IBM Installation Instructions
5.0 Programming
None.
6.0 Purpose and Description
6.1 Purpose To allow the Service Processor type 9577 or 9585 to support the Network Node
Processor operation on the 3746-900 .
6.2 Description
These instructions explain how to exchange the actual HDD by a 2GB HDD. The
exchange of the Hard Disk Drive is divided into four parts:
1. Saving the Service Processor Hard Disk contents on the Optical Disk (Dura-
tion 2 Hrs).
2. Exchanging the Hard Disk Drive.
3. Updating the System Program.
4. Restoring the Service Processor Hard Disk from the Optical Disk (Duration 1.5
Hrs).
7.0 Installation Time
FFB/M Machine Hrs System Hrs Nbr. of CE
29H4179 00.0 00.0 1
8.0 Tools/Material Required
None.
3746 PN 29H4179 EC D55911A EC E46709
FFBM 4 of 24 08 DEC 95 16 MAY 97
4
IBM Installation Instructions
Installation (Steps 9-12)
9.0 Safety
None.
10.0 Details of Installation.
Is the SP installed in a Controller Expansion?
NO, go to 10.1, “Saving the Service Processor Hard Disk on the Optical
Disk.”
YES, continue with next step.
1. Open the front and rear doors of the Controller Expansion
10.1 Saving the Service Processor Hard Disk on the Optical
Disk. Very Important
This function is available from the Service Processor Installation Diskette 1,
use the backup optical disk to save the hard disk data and can take up to 2
hours
If the Service Processor data has been already saved on the backup optical
disk, this procedure can be bypassed.
Are the Service Processor data already saved on the backup optical disk?
1. YES, go to 10.2, “Shut-down and Power OFF the Service Processor” on
page 6
2. NO, continue with next step.
Shut-down and Power OFF the Service Processor:
1. If the Service Processor is operational, use the following procedure:
a. On the MOSS-E view window click on Program
b. Click on Shut down, then enter the Service Processor mainte-
nance password (default is IBM3745) and click on OK.
You are now able to power OFF the Service Processor.
2. Power OFF the Service Processor.
3746 PN 29H4179 EC D55911A EC E46709
FFBM 5 of 24 08 DEC 95 16 MAY 97
5
IBM Installation Instructions
3. Install the Service Processor Installation diskette 1. in the diskette
drive.
4. Power ON the Service Processor.
Backup the HDD on the Optical Disk:
5. Install the backup optical disk in the optical drive.
6. On the first screen displayed, press Enter
7. From the primary window select option Save hard disk and follow the
prompts.
Note: Wait for the message: 'Operation successfully completed'.
8. At the end, select Exit from the primary window and follow the prompts:
On prompt, remove the Service Processor Installation diskette 1,
Remove the backup optical disk from the optical drive.
Secure then for further use.
10.2 Shut-down and Power OFF the Service Processor
1. On the MOSS-E view window click on Program
2. Click on Shut down, then enter the Service Processor maintenance pass-
word (default is IBM3745) and click on OK.
3. Remove any media (Diskette or Optical Disk) from the drives.
4. Power OFF the Service Processor (Control Unit and Display).
Service Processor type ?
9577, go to 10.3, “Replacing the Hard Disk Drive on SP Type 9577..”
9585, go to 10.4, “Replacing the Hard Disk Drive on SP Type 9585.” on
page 13.
10.3 Replacing the Hard Disk Drive on SP Type 9577.
CAUTION
Before removing any FRU, power-off the Service Processor, unplug all power
cords from the electrical outlets, and disconnect any interconnecting cables.
On the rear side of the Service Processor:
1. Unplug the Power cord,
2. the Keyboard and Mouse cables connectors,
3. the LAN cable connector,
4. the Display cable connector and
3746 PN 29H4179 EC D55911A EC E46709
FFBM 6 of 24 08 DEC 95 16 MAY 97
6
IBM Installation Instructions
5. the Modem cable connector.
Is the SP installed in a Controller Expansion?
NO, go to 8
YES, continue with next step.
On the rear side of the Controller Expansion:
6. Slide the base unit from the Controller
Expansion
5
4
3
2
1
Figure 1. Removing the Service Processor Unit from
the Controller Expansion (Rear Side)
7. Take the unit and put it down on a table.
8. Unlock the cover on the front of the
Service Processor base unit.
9. Loosen the cover screws on the back of
the Service Processor. You might need to
use a screwdriver or a coin to turn the
screws if they are too tight.
3746 PN 29H4179 EC D55911A EC E46709
FFBM 7 of 24 08 DEC 95 16 MAY 97
7
IBM Installation Instructions
Remove the cover:
10. Slide the cover toward the front approxi-
mately 25 mm (1 in.).
11. Lift the cover off.
Remove the drive retainer:
12. Press the latch.
13. Pivot the drive retainer downward.
3746 PN 29H4179 EC D55911A EC E46709
FFBM 8 of 24 08 DEC 95 16 MAY 97
8
IBM Installation Instructions
Remove the hard disk drive:
14. Locate the hard disk drive (bay 4) on the
right hand side.
15. Disconnect the Power and Signal cables
from the hard disk drive (Leave the termi-
nator on the drive).
16. Slide the drive forward and out of the bay
(Lift and hold the latch), then
17. place it in a safe place to avoid physical
and ESD damage.
Prepare the drive for installation:
18. Touch the static-protective package to any
unpainted metal surface on the Service
Processor, then remove the drive from the
static-protective package.
19. Check that SCSI ID is set to 6 (Jumpers
should be in positions .2/ and .3/).
Compare with the figure below.
Note: The jumper in position .4/ (Illus-
trated above) is the motor-start. The
jumper should be in place to allow the
hard disk motor to start instantly when you
power-on the system.
3
4
1 2
Figure 2. Jumpers location for SCSI ID 6.
3746 PN 29H4179 EC D55911A EC E46709
FFBM 9 of 24 08 DEC 95 16 MAY 97
9
IBM Installation Instructions
20. Install the rail under the drive, using the
four screws.
21. Slide the new drive completely into the
bay (4).
If the drive does not slide all the way into
the Service Processor, it might be upside
down.
Connect the cables to the drive:
22. Connect the signal cable to the drive, with
the terminator in place.
23. Connect the four-wire power-supply cable,
if required, to the drive.
If you have difficulty connecting a cable,
turn the cable connector over and try
again; cable connectors are keyed and
connect only one way.
Reinstall the drive retainer:
24. Place the bottom edge of the drive retainer
on the tabs that stick up from the bottom
of the Service Processor frame.
25. Pivot the drive retainer up until it snaps in
place over the latch.
3746 PN 29H4179 EC D55911A EC E46709
FFBM 10 of 24 08 DEC 95 16 MAY 97
10
Otros manuales de Almacenamiento de IBM
IBM
IBM 7131-105 Manual de usuario
IBM
IBM System Storage TS7600 ProtecTIER Series Manual de instalación y operación
IBM
IBM LTO Manual de usuario
IBM
IBM IC35L040AVVN07-0 - 40GB IDE Deskstar 120GXP 7200RPM UATA-100... Manual de usuario
IBM
IBM Slicestor 3448 Manual de usuario
IBM
IBM DS4700 EXPRESS Guía de instalación
IBM
IBM 39M5657 Manual de usuario
IBM
IBM Computer Drive Manual de usuario
IBM
IBM Travelstar 5GS Manual de usuario
IBM
IBM Travelstar 3LP Manual de usuario
IBM
IBM TU3 2104 Manual
IBM
IBM C1B 1.12 Brick On Sled Carrier 128-pin HPC Manual de usuario
IBM
IBM 0663 Series Manual de usuario
IBM
IBM T400 Manual de instrucciones
IBM
IBM N3240 Manual
IBM
IBM Elastic Storage System 3500 Manual de usuario
IBM
IBM Storwize V7000 Manual de funcionamiento
IBM
IBM Storwize V5000 Manual de usuario
IBM
IBM FlashSystem 810 Manual de instrucciones
IBM
IBM 31P8128 Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario