IBM POWER GXT135P Graphics PCI Guía

POWER GXT135P Graphics PCI Adapter

Installation and Using Guide

SA23-1256-00

First Edition (September 2001)

Before using this information and the product it supports, read the information in “Safety Information” on page v and

“Appendix B. Notices” on page 17.

A reader’s comment form is provided at the back of this publication. If the form has been removed, address comments

to Publications Department, Internal Zip 9561, 11400 Burnet Road, Austin, Texas 78758-3493. To send comments

electronically, use this commercial internet address: [email protected]. Any information that you supply may be

used without incurring any obligation to you.

Note to U.S. Government Users – Documentation related to restricted rights – Use, duplication, or disclosure is subject

to the restrictions set forth in the GSA ADP Schedule Contract with IBM Corp.

Note

Before you install this product and use this information, be sure to read the product warranties and

notices information included with the system unit into which you are installing the product.

Contents

Safety Information.......................v

Handling Static-Sensitive Devices.................vii

About This Book .......................ix

ISO 9000 ..........................ix

RelatedPublications......................ix

Trademarks .........................ix

Chapter 1. Overview ......................1

Specific Hardware Characteristics ..................1

POWER GXT135P Graphics PCI Adapter ..............1

Display Power Management ....................1

Software Requirements .....................2

Chapter 2. Preparing for Installation ................3

Checking Prerequisites .....................3

Chapter 3. Installing Device Driver Software .............5

AIX Device Driver Software Installation ................5

Chapter 4. Installing the POWER GXT135P Graphics PCI Adapter ......7

Installing the Adapter ......................7

Troubleshooting ........................8

Checking Cables ......................8

Verifying AIX Software Installation .................8

Checking Console ......................9

Verifying AIX Hardware Installation ................9

Chapter 5. Display Information ..................11

Changing Resolution and Refresh Rates ...............11

Appendix A. Communications Statements ..............13

Federal Communications Commission (FCC) Statement ..........13

European Union (EU) Statement ..................14

International Electrotechnical Commission (IEC) Statement .........14

United Kingdom Telecommunications Safety Requirements .........14

Avis de conformitéaux normes du ministère des Communications du Canada . . . 15

Canadian Department of Communications Compliance Statement .......15

VCCI Statement .......................15

Radio Protection for Germany ...................15

Appendix B. Notices .....................17

iii

iv Installation and Using Guide

Safety Information

DANGER

An electrical outlet that is not correctly wired could place hazardous voltage

on metal parts of the system or the devices that attach to the system. It is the

responsibility of the customer to ensure that the outlet is correctly wired and

grounded to prevent an electrical shock.

Before installing or removing signal cables, ensure that the power cables for

the system unit and all attached devices are unplugged.

When adding or removing any additional devices to or from the system,

ensure that the power cables for those devices are unplugged before the

signal cables are connected. If possible, disconnect all power cables from the

existing system before you add a device.

Use one hand, when possible, to connect or disconnect signal cables to

prevent a possible shock from touching two surfaces with different electrical

potentials.

During an electrical storm, do not connect cables for display stations, printers,

telephones, or station protectors for communications lines.

vi Installation and Using Guide

Handling Static-Sensitive Devices

Attention: Static electricity can damage this device and your system unit. To avoid

damage, keep this device in its anti-static protective bag until you are ready to install it.

To reduce the possibility of electrostatic discharge, follow the precautions listed below:

vLimit your movement. Movement can cause static electricity to build up around you.

vHandle the device carefully, holding it by its edges or its frame.

vDo not touch solder joints, pins, or other printed circuitry.

vDo not leave the device where others can handle and possibly damage the device.

vWhile the device is still in its anti-static package, touch it to an unpainted metal part

of the system unit for at least two seconds. (This drains static electricity from the

package and from your body).

vRemove the device from its package and install it directly into your system unit

without setting it down. If it is necessary to set the device down, place it on its

static-protective package. (If your device is an adapter, place it component-side up).

Do not place the device on your system unit cover or on a metal table.

vTake additional care when handling devices during cold weather, as heating reduces

indoor humidity and increases static electricity.

vii

viii Installation and Using Guide

About This Book

This book provides information about the POWER GXT135P Graphics PCI Adapter and

its associated device driver software. Use this book together with your specific system

unit and operating system documentation.

ISO 9000

ISO 9000 registered quality systems were used in the development and manufacturing

of this product.

Related Publications

The following publications contain related information:

vSystem unit documentation for information specific to your hardware configuration

vOperating system documentation for information specific to your software

configuration

vPCI Adapter Placement Reference Guide (for the latest version, you may need to

contact your marketing representative)

Trademarks

The following term is a trademark of International Business Machines Corporation in the

United States, other countries, or both:

vAIX

Other company, product, and service names may be trademarks or service marks of

others.

xInstallation and Using Guide

Tabla de contenidos

Otros manuales de Adaptador de IBM

IBM

IBM N2125 Manual de instalación

IBM

IBM OpenCAPI Manual de instrucciones

IBM

IBM 4684 Store Loop Adapter/A Manual de usuario

IBM

IBM Remote Supervisor Adapter II Manual de usuario

IBM

IBM Power GXT800P Manual de usuario

IBM

IBM FC EJ08 Manual de usuario

IBM

IBM 57D7 Manual de usuario

IBM

IBM OPTIONS Manual de usuario

IBM

IBM ThinkPad i Series Manual de usuario

IBM

IBM Netfinity 10/100 Ethernet Adapters Manual de usuario

IBM

IBM Power System 8247-21L Manual de usuario

IBM

IBM Flex System FC5024D Manual de usuario

IBM

IBM 10/100 Mbps Ethernet PCI Adapter II Guía

IBM

IBM Flex System EN4132 Manual de usuario

IBM

IBM Netfinity ServeRAID-3H Manual de usuario

IBM

IBM 4-Port 10/100 Base-TX Ethernet PCI Guía

IBM

IBM 10/100/1000 Base-T Ethernet PCI Guía

IBM

IBM Brocade Manual de usuario

IBM

IBM Emulex Virtual Fabric Adapter Manual de usuario

IBM

IBM Emulex Manual de usuario

IBM

IBM High IOPS Adapter Manual de instalación

IBM

IBM Netfinity Manual de usuario

IBM

IBM Flex System FC3052 Manual de usuario

IBM

IBM DS8000 - ADDITIONAL INFORMATION Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario