iBeam TE-FDEM Manual de usuario
IMPORTANT
If you are having difficulties with the installation of this product, please call out Tech Support line at 1-
800-253-TECH. Before doing so, looks over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated. Please have the vehicle apart and
ready to perform troubleshooting steps before calling.
REV. 07/17/2018
TE-FDEM Manual
1. Box Contents
Wiring Emblem/Camera
2. Applications
2011-2016 Ford F150 Super Duty
3. Installation
•Connect the RED wire to a 12V reverse trigger.
•Connect the BLACK wire to a chassis ground.
•Cut the WHITE loop to cancel the parking guide lines.
4. Wiring diagram
5. Specifications
Sensor
CMOS ¼ sensor
Resolution
400 TV Lines
Field of View
Diagonal 168°, Horizontal 136°, Vertical 100°
Illumination
0.1 Lux
IP Rating
IP69
Parking Lines
Defeatable
Extension Cable
26’
TV System
NTSC
Working Temp.
-20°C ~ 70°C
Warranty
3 Years
Extension cable Camera cable
26 ft 2 ft
Ground & power
12v trigger
Otros manuales de Accesorios para automóviles de iBeam
iBeam
iBeam TE-DVR-MM Manual de usuario
iBeam
iBeam TE-DGH Manual de usuario
iBeam
iBeam TE-BPLTC Manual de usuario
iBeam
iBeam TE-AD43 Manual de usuario
iBeam
iBeam TE-TATGCHD Manual de usuario
iBeam
iBeam TE-180 Manual de usuario
iBeam
iBeam TE-JPKT Manual de usuario
iBeam
iBeam TE-WKMR43 Manual de usuario
iBeam
iBeam TE-RM45 Manual de usuario
iBeam
iBeam TE-3BFT Manual de usuario
