I-View Smart Vacuum Manual de usuario
1 Important safety instrucons
Pleasereadthefollowingsafetyinstruconsbeforeusingthisproduct
to avoid damage.
Warning!Violaonofsafetyinstruconsmaycauseseverepersonalcasualty
and property loss.
Do not put weight on the power cord
or bend the power cord, otherwise
maycauseelectricshockorre.
Always use the original charger with ^ this
product, otherwise may cause product
damage,electricshockorre.
Do not handle the power cord with
wet objects, otherwise may cause
electric shock.
Keep the product away from heat
or flammable objects.
While in use, keep objects like clothes
and hair away from the device. Do
not touch the wheels or brushes of
the device while in use.
Do not attempt to disassemble or after
the main machine, otherwise may cause
fire,electricshockorpersonalinjury.
Make sure the charger is firmly
plugged into the socket. Otherwise
maycauseelectric shock, short-
circuit, smoke or fire.
Do not use the product to vacuum stones,
metals, large pieces of waste, or heated
objects like cigarette butts.
Do not stand or sit on the product,
otherwise may cause product damage
orpersonalinjury.
To avoid product damage, do not use in
elevated areas (IE, stairs, balconies,
etc.), where it may fall.
Clear up all fragile, braided fabrics,
glassesorbolesbeforeuseit,
otherwise may cause damage
Do not use the product to vacuum water
or other liquids, otherwise may cause
product damage
To avoid injury, be careful when
operating this product around
children.
This product is meant for indoor use
only. Do not operate outdoors.
Pleaseswitchtheproductoffwhen
not in use for long periods of time.
Do not use it in public commercial places.
Children and people with disabilities should not operate this product without direct
supervision.
2. Components
2.1 The main machine
2.2Chargingstaon
1An-fallingSensor
2 Charging Pole
3 Side brush
4 Driving wheel
5 Main brush
6Dustbinandwater
tank
7An-collisionsensors
8Tape
9Universalwheel
10 Charging socket
11Power switch
12 Dust box and water
tank assembly key
13 Display panel
14 Auto-cleaning
buon
1 Signal receiving window
2 DC Charging Socket
3 Charging Poles
2.3 Display panel
2.4 Remote control
WIFI display
Baerystatus
Time/Plan display
1On/Obuon
2Autobuon
3Okbuon
4Edgecleaningbuon
5Clockbuon
6Strongcleaningbuon
7Planbuon
8Spotcleaningbuon
9Dmodebuon
10Direconbuon
11Auto-chargingbuon
3. Product operaons
1. Chargingstaon
1. Placechargingstationagainstwalland
remove any obstacles within a 2 meter
radius of the charging station.(asshow
inthefigure)
2. Connect the adapter to DC charging
socketonchargingstation.
2 Side brush
The side brushes can be cleaned or
replaced by unscrewing them from the
main unit.
3 Disassemble of main brush
Pushthebuononthemainbrush,then
take out the roller brush and fur brush.
4 Dust and water tank
1Pressthebuonondustbin,
pull out the dustbin.
2 Push the dustbin into the right
posion,installthedustbinagain.
3Pressthebuonasshowninthe
picture to clean the dust box.
4 Pour the garbage into trash bin.
5 When you need to use the mop,
please remove the dustbin and install
the water tank and mop.
6Pressthebuonondustbin,remove
the dustbin, and install the water tank.
5 Mop
Install the mop on the water tank.
6Fillwaterinwatertank
Pulltherubbercover,llinwater,
and install the rubber cover again.
3.2 Product charging
1. Manual charging
Connect the power plug directly to the
DCsocketforcharging.(Asshowin
gure)
2 Auto charging
1 When the robot is in Auto Cleaning
Mode,itwillstarttondchargingstaon
when power is low.
2 When the robot is on, press HOME
Buonontherobotorremotecontrol
tolettherobotstartndingcharging
staon
3 Charging status
1Pleasemakesurethebaeryhas
beenchargedfor12hoursforthefirst
charging. While charging, the charging
status light will begin flashing;when
fully charged, the charging status light
will stop flashing.
2 If used frequently, keep the power
switch on the robot to the ON position
and make sure it's in it's charging
station..
3 If the robot will not be used for long
periods of time, please store in a cool
dry area.
4 When the robot is in Planning mode,
please use the auto-charging function.
Do not manually charge the device.
3.3 Product Mode
1 Cleaning mode: The robot is cleaning,
display panel is On
2 Standby mode: Power switch is On,
display panel is On
3 Sleeping mode: Power Switch is On,
displaypanelisO
4 WIFI mode: Power switch is on, WiFi
modeison,set the power switch on the
robot to the OFF positionfor 3 seconds
to close/open WIFI. Set the power switch
on the robot to the OFF position for 6
secondstodisconnectthemachineand
appconnection.
1 Cleaning mode
1 Make sure the switch on the robot is
set to the ON position
2PressanyCleaningButtononthe
robotorremotecontroltoactivate
cleaning
3 Note: If the robot is in Standby mode,
pressinganycleaningbuttononthe
robotortheStandbybuttononthe
remote control to wake it up.
2 Standby mode
1 The device will enter standby mode
when in-between cleaning jobs. It will
remain in standby mode until a new
cleaning job is assigned or powered off.
2 You can manually put the device in
standby-mode by pressing any cleaning
button on either the remote or the
device itself.
3 Sleeping
1 If the robot remains in standby mode
longer than 45 seconds, it will power
down and enter sleep mode.
2 The device can be manually put into
sleep mode, by pressing the power
button on the remote, while the device
is in standby mode.
3 When the device is in sleep mode,
you can wake the device by pressing the
power button on either the remote or
the robot itself.
3.4 Cleaning Mode
1 Auto Cleaning Mode
1TherobotcleanerusesInertial
Navigation,anadvancednavigation
system that ucalculates thebestpathto
efficientlyclean your room. When it is in
Auto Clea-ningMode,itwillcleanrooms
automa-callyandadjustitscleaning
modesaccording to its environment.
2 Note: By pressing Auto Cleaning
buttonontherobotorremotecontrolto
activateAutoCleaningmode.
2 Spot Cleaning Mode
1 Put the robot in the area requires
Spot Cleaning, press Spot Cleaning but-
ton on the robot or remote control
toacvethismode
2 Note: If you want to terminate the
Spot Cleaning mode, press any Cleaning
buons on the robot control or the
robot to stop this mode; also the robot
will automacally stops cleaning when
Spot Cleaning is done
3 Edge Cleaning Mode
1 Put the robot close to the edge of
wall,pressEdgeCleaningbuonon
the remote control to start this mode.
Note: If you want to terminate the Edge
Cleaning mode, press any Cleaning
buttonsontherremote control to stop
this mode.
4 Scheduling Cleaning
1 Set up Scheduling Cleaning as
needed. When scheduling Is set up,
the robot will start cleaning according
to the set schedule and return to its
charging station when completed.
5 D Cleaning
1 When the robot is on, or in cleaning, or
inchargingstatus(connectedtocharging
staon),pressDbuonontheremote
controltoactivatethismode.Therobot
willstartcleaningautomaticallyonce
fully charged.
3.5 Plan mode/Scheduling
1TimeSetting
1 Make sure the robot is on and not in
charging
2 Point your remote control toward
the display panel of the robot, press
ClockButton,thelefttwonumberswill
flash,pressUpArrow/DownArrowto
set up the current HOUR, and press OK
toconfirm;thentherighttwonumbers
willflash,pressUpArrow/DownArrow
to set up the current Minute, press OK
toconfirm.
3PressOKbuttontoconfirm.Current
clocksettingisfinished.
2SchedulingSetting
Oncetheschedulingsettingisactivated,
the robot will begin cleaning, every day,
at the scheduled time.
1 Make sure the robot is on and not in
charging
2 Point your remote control toward
the display panel of the robot, press Plan
SettingButton,thelefttwonum-bers
willflash,pressUpArrow/DownArrow
to set up the current HOUR, and press
OKtoconfirm;thentherighttwo
numberswillflash,pressUpArrow/
Down Arrow to set up the current Minu-
te,pressOKtoconfirm.Thescheduling
settingisfinished.
3.6 Remote control operation
1 Press this button to wake the robot
from sleep mode. Press it again to have
the robot enter sleep mode.
2 Auto button
When the robot is standby, press this
buttontostartautocleaning.
3 OK button
Whenscheduling,pressthisbuttonto
savesetting.
4
When the robot is standby, press this
buttontostartedgecleaning.
5 Clock button
When the robot is standby mode, press
this button to set the time on the robot.
6
When the robot is cleaning, press this
buttontostartstrongpowercleaning.
Press again to stop.
7 Plan button
When the robot is in standby mode, press
this buttonto enter planning mode. You
will be able to schedule a time for the
robot to clean..WhentherobotIsIn
planningmode,pressthisbuttonto
cancel.
8
When the robot Is standby, press this
buttontostartspotcleaning.
9 D mode button
When the robot Is In standby mode or
on thechargingstation,press this button
to have the robot begin cleaning after
it's been fully charged.
10 Direction button
1 Forward
IncreasenumberwhenInTimingSetting
orSchedulingSetting.Robotmoves
forward when In Standby Mode or any
other Cleaning Modes.
2 Backward
DecreasenumberwhenInTiming
SettingorSchedulingSetting.Robot
movesbackward when In Standby Mode
or any other Cleaning Modes.
3 LeftArrow
WhenInTimesettingorSchedulingSet-
ting,pressIttoskipthenumbersetting
fromlefttwodigitstorightdigits.Robot
turnsleftwhenInStandbyModeorany
other Cleaning Modes.
4 Right Arrow
WhenInTimesettingorSchedulingSet-
ting,pressIttoskipthenumbersetting
fromrighttwodigitstoleftdigits.Robot
turns right when In Standby Mode or
any other Cleaning Modes.
11 HOME button
While the robot is in standby mode,
press this button to have it search for its
charging station.
4. Product maintenance
4.1 Dustbin and lter
1Takethefilteringclothoutasper
figureandcleanit(when washing the
dustbin, make sure it's dry before using
again)
2Notes:Do NOT clean filter with water.
Please clean it by using a softbrush.
4.2 Main brush and side brush
Cleanthembyusingasobrush.
4.3 Other parts
1 Keep the universal wheel clean
of hair, animal dander and string.
2 Cleanallsensorsusingasoft
cloth.
3 Cleaning charging poles using a
drysoftcloth.
Notes:
When cleaning the main machine and its
parts,pleasemake sure the robot is
powered off and disconnected from the
charger.
Otros manuales para Smart Vacuum
1
Tabla de contenidos
Otros manuales de Aspiradora de I-View
