Hytera E-pack100 Manual de usuario

To Costumers

Thank you very much for your favor of our products! This manual aims to enable you

quickly grasp the use of the product.

This manual applies to the following model:

E-pack100 Digital WANET Repeater

Icon Conventions

The following icons are used in this manual. The explanation of icons are

as follows:

Icon Description

Caution Indicates situations that could cause data loss or

equipment damage.

Comment Indicates notes that serves as supplement, illustration

or emphasis to the main content.

Hytera is the trademark or registered trademark of Hytera Communications

Corporation Limited (the Company) in People's Republic of China (PRC)

and/or other countries or areas. The Company retains the ownership of its

trademarks and product names. All other trademarks and/or product

names that may be used in this manual are properties of their respective

owners.

The product described in this manual may include the Company's

computer programs stored in memory or other media. Laws in PRC and/or

other countries or areas protect the exclusive rights of the Company with

respect to its computer programs. The purchase of this product shall not be

deemed to grant, either directly or by implication, any rights to the

purchaser regarding the Company's computer programs. The Company's

computer programs may not be copied, modified, distributed, decompiled,

or reverse-engineered in any manner without the prior written consent of

the Company.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of

this manual, but no warranty of accuracy or reliability is given. All the

specifications and designs are subject to change without notice due to

continuous technological development. No part of this manual may be

copied, modified, translated, or distributed in any manner without the prior

written consent of the Company.

We do not guarantee, for any particular purpose, the accuracy, validity,

timeliness, legitimacy or completeness of the third-party products and

contents involved in this manual.

If you have any suggestions or would like to receive more information,

please visit our website at: http://www.hytera.com, or call our service

hotline 400-830-7020.

Federal Communications Commission (FCC) Regulatory

Requirements

According to the Federal Communications Commission regulatory

requirements, the terminals must comply with the FCC's rules on

radiofrequency radiation, otherwise the products shall not be sold in the

iii

U.S market. Besides, the manufacture shall be asked to post a label on

products informing costumers of considerations and improving the

costumers’ awareness of radiation protection.

Radiofrequency Radiation Control and Operation Instructions

In order to ensure the best performance of products and ensure that the

radiation restrictions related to occupations or environments are met, the

delivery time shall not exceed 50% of the rated factor.

FCC Regulations

Federal Communication Commission (FCC) requires that all radio

communication products should meet the requirements set forth in the

above standards before they can be marketed in the U.S, and the

manufacturer shall post a RF label on the product to inform users of

operational instructions, so as to enhance their occupational health against

exposure to RF energy.

FCC Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates and can radiate radio

frequency energy. If not installed and used in accordance with the

instructions, it may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. Verification of harmful interference by this equipment

to radio or television reception can be determined by turning it off and then

on. The user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation

between the equipment and receiver.

Connect the equipment into an outlet on a different circuit to that of the

receiver's outlet.

Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including

interference that may cause undesired operation.

Note: Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user's authority to operate

the equipment.

Operational Instructions and Training Guidelines

To ensure optimal performance and compliance with the

occupational/controlled environment RF energy exposure limits in the

above standards and guidelines, users should transmit not more than 50%

of the time and always adhere to the following procedures:

Antenna gain must not exceed 2.15dBi.

The antenna must be installed complying with the requirements of

manufacturer or supplier, and it must be at least 50cm away from

human body.

Compliance with RF Exposure Standards

Hytera's radio complies with the following RF energy exposure standards

and guidelines:

United States Federal Communications Commission, Code of Federal

Regulations; 47 CFR § 1.1307, 1.1310 and 2.1091

American National Standards Institute (ANSI) / Institute of Electrical

and Electronic Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5

March 2015

Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition

ISEDC Statement

This device complies with Innovation, Science and Economic Development

Canada Compliance license-exempt RSS standard(s). Operation is subject

to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including

interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables

aux appareils radio exempts de licence. L'exploitation est autorisée aux

deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage,

et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement

ISEDC Radiation Exposure Statement:

This device must be restricted to work related operations in an

Occupational/Controlled RF exposure Environment.

This equipment should be installed and operated with minimum distance

50cm between the radiator & your body.

ISEDC exposition aux radiations:

Ce dispositif doit être limité aux opérations liées au travail dans un

environnement d'exposition RF professionnel/contrôlé.

Cet équipement doit être installé et utilisé avec un minimum de 50cm de

distance entre le radiateur et votre corps.

EU Regulatory Conformance

As certified by the qualified laboratory, the product is in compliance with

the essential requirements and other relevant provisions of the Directive:

2014/53/EU

2006/66/EC

2011/65/EU

vii

2012/19/EU

Please note that the above information is applicable to EU countries only.

The maximum antenna gain is 3.5dBi, which is caculated in the EIRP. The

distance from observation point to the antenna is 50cm.

Restrict use warning:

viii

Content

1. Packing List..........................................................................................1

2. Product Component.............................................................................2

2.1 Host..................................................................................................2

2.2 Palm Microphone..............................................................................4

3. Installation............................................................................................6

3.1 Installation Requirements.................................................................6

3.2 Host Installation................................................................................6

3.3 Check after Installation.....................................................................8

4. Basic Operation....................................................................................9

4.1 Power on ..........................................................................................9

4.2 Power off ..........................................................................................9

4.3 GSM Link Building............................................................................9

4.4 Switch Channel.................................................................................9

4.5 Host Information Query.....................................................................9

5. Fault Handling....................................................................................11

6. Maintenance and Cleaning................................................................14

7. Accessories Purchase.......................................................................15

8. Scope and Duration of Warranty ......................................................16

1. Packing List

The packing case contains the following items. If there is any loss or damage, please

contact the dealer or our company.

Items Number Items Number

Host 1 Palm Mircophone 1

Antenna 1 Mannual 1

Battery 1

Comment

The pictures in this manual are for reference only. Please refer to the actual

products.

Tabla de contenidos

Otros manuales de Reloj de repetición de Hytera

Hytera

Hytera RD982i Manual de usuario

Hytera

Hytera RD98X series Instrucciones de montaje

Hytera

Hytera RD988 U5 Manual de usuario

Hytera

Hytera RD106X Manual de usuario

Hytera

Hytera HR652 Manual de usuario

Hytera

Hytera RD985 Manual de usuario

Hytera

Hytera E-pole 100 Manual de usuario

Hytera

Hytera RD965 Manual de usuario

Hytera

Hytera RD620 Manual de usuario

Hytera

Hytera DMR Instrucciones de instalación y funcionamiento

Hytera

Hytera HR106 Series Manual de usuario

Hytera

Hytera HR65X Manual de usuario

Hytera

Hytera RD98XSi series Manual de usuario

Hytera

Hytera RD980 Manual de instalación y operación

Hytera

Hytera RD98XSU Manual de usuario

Hytera

Hytera RD962i Manual de usuario

Hytera

Hytera RD98 Series Manual de usuario

Hytera

Hytera HR106X Manual de usuario

Hytera

Hytera HR106X Manual de usuario

Hytera

Hytera RD982 Manual de usuario

Hytera

Hytera 982i Manual de usuario

Hytera

Hytera RD98 Series Manual de usuario

Hytera

Hytera DS-9300 Manual de usuario

Hytera

Hytera CHU-P0BA00 Manual de usuario

Manuales populares de Reloj de repetición de otras marcas

Gigaset

Gigaset 108 Manual de usuario

Ace TECHNOLOGY

Ace TECHNOLOGY USR-1900A Manual de usuario

Kenwood

Kenwood TKR-750-850 Manual de lista de piezas

Asus

Asus RP-AC51 Manual de usuario

Exibel

Exibel HRP0101 Manual de usuario

Kidde

Kidde Vega Manual de usuario

Telcosat

Telcosat RBB 850 Guía de instalación

York

York Universal LINC485 Manual de usuario

MIKOM

MIKOM MRx01B Power Series Manual de usuario

Simrad

Simrad RD 301 Manual de usuario

Tait

Tait TB7304 Manual de usuario

R-tron

R-tron RSN-CDMA-37-C Manual de usuario

Inventronics

Inventronics DALI REPEATER SO Manual de usuario

XFP

XFP 16 Manual de usuario

Andrew

Andrew MRx18 Manual de usuario

COMBA

COMBA RXA3748 Manual de usuario

ADRF

ADRF SDR-ICS-43 Manual de usuario

Teltonika

Teltonika WRP100 Manual de usuario