Hytera VM750D Manual de usuario
Hytera Communications Corporation Limited
VM750D Body Worn Camera
(Hytera Hytalk Sight)
User Manual
Preface
Welcome to the world of Hytera and thank you for purchasing this product. To derive optimum performance from
the product, please read this manual carefully before use.
This manual is applicable to the following product:
VM750D Body Worn Camera (Hytera Hytalk Sight)
Icon Conventions
The instructional icons and their respective meanings are listed below:
: Indicates references that can further describe the related topics.
: Indicates situations that could cause data loss or equipment damage.
Key Operations
Long press: To press and hold the key for two seconds.
Press: To press a key and release it immediately.
Press and hold: To press a key and keep holding it down.
Copyright Information
Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in
PRC and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All
other trademarks and/or product names that may be used in this manual are properties of their respective owners.
The product described in this manual may include the Company’s computer programs stored in memory or other
media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its
computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any
rights to the purchaser regarding the Company’s computer programs. Any of the Company’s computer programs
may not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written
consent of the Company.
Disclaimer
The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or
reliability is given. All the specifications and designs are subject to change without notice due to continuous
technology development. No part of this manual may be copied, modified, translated, or distributed in any manner
without the express written permission of us.
We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of
the Third Party products and contents involved in this manual.
If you have any suggestions or would like to learn more details, please visit our website at: http://www.hytera.com.
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential requirements and other
relevant provisions of the following directives:
2006/66/EC
2011/65/EU
2012/19/EU
2014/53/EU
Please note that the above information is applicable to EU countries only.
1. Packing List
Please unpack carefully and check that you have received the following items. If any item is missing or damaged,
contact your dealer.
Item
Quantity
(PCS)
Item
Quantity
(PCS)
VM750D Body Worn Camera (BWC)
1
USB Data Cable
1
Battery
1
Power Adapter
1
Belt Clip
1
User Manual
1
Pictures in this manual are only for reference.
2. Product Overview
2.1 Product Layout
2.2 LED Indicator
Status
Description
Glows red
Always
The product is transmitting voice.
The product is being charged, and the battery power is below 80%.
For three seconds
The TF card is full.
For two seconds
The product is being turned off.
Glows green
The product is fully charged.
The product is being turned on.
Glows orange
The product is being charged, and the battery power is equal to or above 80%.
Flashes orange rapidly for three
seconds
The remaining capacity of the TF card is less than 2 GB.
Flashes red
slowly
Once every
second
The product is recording a video.
Status
Description
Once every five
seconds
The battery runs low. Please recharge or replace the battery in time.
Flashes orange slowly
The product is recording audio.
Flashes blue
slowly
Once every
second
The product is connected with a BT device (without BLE).
Once every two
seconds
The product is transmitting data.
Flashes red and blue alternatively
The product is switching to BT pairing mode (without BLE).
Flashes green slowly
The product is connected with a BLE device (without BT).
Glows cyan
The product is switching to BT pairing mode (with BLE).
Flashes cyan slowly
The product is connected with a BT device (with BLE).
Glows blue for one minute
The product has completed data transmission.
3. Before Use
3.1 Installing the Nano SIM Card
1. Open the card slot cover.
2. Unlock the Nano SIM card flip cover according to the instructions on it.
3. Place the Nano SIM card into the slot.
4. Lock the flip cover and slot cover, as shown in the following figure.
3.2 Attaching the Battery
Use only the Hytera standard or optional battery. Polarity reverse or use of other batteries may result in
explosion and fire hazards.
Dispose of used batteries in accordance with the "Recycling and Handling Safety Precautions" in the
Safety Information Manual.
Do not remove the battery except when installing the SIM card or when the battery is damaged. An alarm
will be sent to the Hytera Hytalk Sight (HHS) Monitor upon battery removal.
Attach the battery according to the following figure.
1. Insert the battery (①).
2. Fasten the two screws with a screwdriver (②).
3.3 Attaching the Belt Clip
Attach the belt clip according to the following figure.
To remove the belt clip, reverse the attaching steps.
3.4 Charging the Product
Charge the product according to the following figure.
You can learn about the charging status from the LED indicator. For details, see 2.2 LED Indicator.
3.5 Attaching the Accessory
To ensure the waterproof performance, do not scrape the silicone surrounding the accessory jack.
After disconnecting the accessory, put the accessory jack cover back in place and tighten the screw on the
cover.
1. Open the accessory jack cover.
2. Insert the accessory to the accessory jack.
Tabla de contenidos
Otros manuales de Cámara digital de Hytera
