HyperX Cloud Core CL004 Manual de usuario
HyperX Cloud Core Wireless Headset/CL004
HyperX Cloud Core Wireless adapter/CL004WA
Quick Start Guide
HyperX Cloud Core Wireless Headset
Overview
[Use the following line drawings:
1. ¾ view of headset without microphone
2. Bottom view of headset (labels A-F)
3. Detachable boom microphone with mic foam (label G-H)
4. Top-down view of USB wireless adapter (labels I-K)
5. USB charge cable (label L)
]
[Reference images:
]
A. Status LED
B. Mic mute / mic monitoring button
C. USB-C charge port
D. Microphone port
E. Volume wheel
F. Detachable microphone
G. Microphone mute LED
H. USB adapter
I. Wireless pairing pin hole
J. Wireless status LED
HyperX Cloud Core Wireless Headset/CL004
HyperX Cloud Core Wireless adapter/CL004WA
K. USB-C charge cable
Usage
[Use the following line drawings:
¾ view of headset with microphone attached
Wireless adapter
oArrow pointing from the USB adapter to PC USB port and PS4 USB port
]
[Reference images:
]
1. Connect the wireless adapter to your device
2. Power on the headset
Setting up with PC
Right click speaker icon > Select Open Sound settings > Select Sound control panel
[Use Windows 10 1903 Setup speaker icon menu graphic and sound settings menu graphic]
[Reference images:
]
HyperX Cloud Core Wireless Headset/CL004
HyperX Cloud Core Wireless adapter/CL004WA
Playback Device
1. Set Default Device to “HyperX Cloud Core Wireless”
[Use Windows OS playback sound control panel menu graphic for selecting HyperX Cloud II Wireless as
Default Device]
[Reference image:
]
2. Right click on “HyperX Cloud Core Wireless” and click on Configure.
3. Select 7.1 Surround to configure your setup and click next.
[Use Windows OS playback sound control panel menu graphic for selecting speaker setup]
[Reference image:
]
HyperX Cloud Core Wireless Headset/CL004
HyperX Cloud Core Wireless adapter/CL004WA
Recording Device
Set Default Device to “HyperX Cloud Core Wireless”
[Use Windows OS recording sound control panel menu graphic for selecting HyperX Cloud II Wireless as
Default Device]
[Reference image:
]
Setting up with PlayStation 4
Settings > Devices > Audio Devices
Input Device: USB Headset “HyperX Cloud Core Wireless”
Output Device: USB Headset “HyperX Cloud Core Wireless”
Output to headphones: All Audio
HyperX Cloud Core Wireless Headset/CL004
HyperX Cloud Core Wireless adapter/CL004WA
[Use the following line drawing:
Bottom view of headset with left earcup only
oSmall label “Status LED” with an arrow pointing to the status LED on the left earcup
oSmall label “Mic mute / mic monitoring button” with an arrow pointing to the mic mute
button on the left earcup
]
[Reference image:
]
Status LED
Status
[LED]
Pairing
Flash green and red every 0.2s
Searching
Slow breathing green
Connected*
90% —100%: Solid green
15% —90%: Blinking green
< 15%: Blinking red
*Battery level indication
Mic mute / mic monitoring button
Mic mute toggle - Press button to turn the mic mute on/off
oMicrophone mute LED On –Mic muted
oMicrophone mute LED Off –Mic active
Mic monitoring toggle –Hold button for 3 seconds to toggle mic monitoring on/off
HyperX Cloud Core Wireless Headset/CL004
HyperX Cloud Core Wireless adapter/CL004WA
[Use the following line drawing:
Zoomed-in crop of the right earcup with focus on volume wheel
oSmall label “Volume wheel” with an arrow pointing to the volume wheel on the right
earcup
]
[Reference image:
]
Volume wheel
Scroll up and down to adjust volume level.
Charging
It is recommended to fully charge your headset before first use.
[Use the following line drawing:
Connect the USB-C charge cable USB-A end to PC and USB-C end to headset USB charge port
]
[Reference images:
]
Status [LED]
Charge Status
Fully Charged
Solid green
HyperX Cloud Core Wireless Headset/CL004
HyperX Cloud Core Wireless adapter/CL004WA
15% —99%
Breathing green
< 15%
Breathing red
HyperX NGENUITY Software
Download software and latest firmware updates at
hyperxgaming.com/ngenuity
[NGENUITY logo]
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at hyperxgaming.com/support/headsets
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended
periods of time.
NCC statement:
「取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大
功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經
發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管
理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性
電機設備之干擾。」
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
ISED Statement:
HyperX Cloud Core Wireless Headset/CL004
HyperX Cloud Core Wireless adapter/CL004WA
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) this device may not cause interference,
(2) this device must accept any interference, including interference that may cause undesired operation of
the device.
L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Auriculares de HyperX
HyperX
HyperX Cloud Alpha Instrucciones de funcionamiento y mantenimiento
HyperX
HyperX Cloud Stinger Wireless HX-HSCSW-BK Manual de usuario
HyperX
HyperX Cloud Revolver HX-HSCR-BK/AS Manual de usuario
HyperX
HyperX HX-HSCS-BK/AS Manual de usuario
HyperX
HyperX Cloud Core Manual de usuario
HyperX
HyperX Cloud Stinger Manual de usuario
HyperX
HyperX HX-HSCSC-BK Manual de usuario
HyperX
HyperX Cloud Alpha S Manual de usuario
HyperX
HyperX Cloud Revolver 7.1 Manual de usuario
HyperX
HyperX HX-HSCF-BK/AM Manual de usuario
HyperX
HyperX Cloud Alpha Manual de usuario
HyperX
HyperX Cloud Alpha Manual de usuario
HyperX
HyperX Cloud Flight S Manual de usuario
HyperX
HyperX Cloud Alpha S Manual de usuario
HyperX
HyperX Cloud Stinger Wireless HX-HSCSW-BK Manual de usuario
HyperX
HyperX CLOUD 2 ROUGE Manual de usuario
HyperX
HyperX QuadCast S Manual de usuario
HyperX
HyperX cloud ii Manual de usuario
HyperX
HyperX HyperX Cloud Flight Manual de usuario
HyperX
HyperX HyperX Cloud Flight Manual de usuario
