Hypercable TwinRadio HYC-Wi 2000 Manual de usuario
User Manual
Includes install, configuration and trouble
shooting information for the broadband
wireless access outdoor radio.
TwinRadio HYC-Wi 2000
Gigabit Full Duplex Radio Link 24 GHz
XPIC FDD Radio PTP Bridge IP Link
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 2 of 39 Version 1.0
1 SPU Description. ........................................................................................................................................ 4
1.1 Service connectors............................................................................................................................. 4
1.2 Status LEDs ........................................................................................................................................ 7
1.3 Interface LED ..................................................................................................................................... 7
1.4 Power supply ................................................................................................................................... 10
2 Management Introduction ...................................................................................................................... 10
2.1 Management access ........................................................................................................................ 10
2.2 Local and remote setting................................................................................................................. 11
2.3 Storing the configuration and the configuration scope .................................................................. 11
3 First configuration steps.......................................................................................................................... 12
3.1 Connection and Login...................................................................................................................... 12
3.2 General system configurations........................................................................................................ 13
3.3 IP configurations.............................................................................................................................. 14
3.4 Modem and Radio configurations................................................................................................... 14
4 Graphical User Interface (WEB GUI)........................................................................................................ 15
4.1 Web header & Side panel description............................................................................................. 15
4.2 General ............................................................................................................................................ 16
4.2.1 Status ....................................................................................................................................... 16
4.2.2 Mode ....................................................................................................................................... 16
4.3 Info................................................................................................................................................... 17
4.3.1 License ..................................................................................................................................... 17
4.3.2 Date ......................................................................................................................................... 17
4.3.3 Users ........................................................................................................................................ 17
4.4 Alarms Page ..................................................................................................................................... 17
4.4.1 Status ....................................................................................................................................... 17
4.4.2 Alarm Conf............................................................................................................................... 18
4.4.3 Logs.......................................................................................................................................... 19
4.5 Radio Page ....................................................................................................................................... 19
4.5.1 Parameters .............................................................................................................................. 19
4.5.2 Analyser ................................................................................................................................... 20
4.5.3 Diagram ................................................................................................................................... 21
4.5.4 ACM ......................................................................................................................................... 21
4.5.5 Advanced ................................................................................................................................. 22
4.5.6 Details...................................................................................................................................... 22
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 3 of 39 Version 1.0
4.6 Ports Page........................................................................................................................................ 23
4.6.1 Parameters .............................................................................................................................. 23
4.6.2 ETH VLAN................................................................................................................................. 24
4.6.3 ETH Advanced.......................................................................................................................... 26
4.7 IP Page ............................................................................................................................................. 27
4.7.1 Address .................................................................................................................................... 27
4.7.2 Route/NAT ............................................................................................................................... 28
4.7.3 SNMP ....................................................................................................................................... 29
4.7.4 Advanced ................................................................................................................................. 29
4.8 Count Page....................................................................................................................................... 30
4.8.1 Basic/BER ................................................................................................................................. 30
4.8.2 Ethernet................................................................................................................................... 31
4.8.3 Management ........................................................................................................................... 31
4.8.4 Graphs...................................................................................................................................... 31
4.8.5 Online Graphs .......................................................................................................................... 32
4.9 Maintenance Page........................................................................................................................... 32
4.9.1 Config....................................................................................................................................... 32
4.9.2 Terminal................................................................................................................................... 32
4.9.3 Files.......................................................................................................................................... 32
4.9.4 Advanced ................................................................................................................................. 33
5 Command Line Interface (CLI) ................................................................................................................. 35
5.1 Basic command structure................................................................................................................ 35
5.2 Altering device configuration using CLI –enable mode .................................................................. 36
5.3 CLI command abbreviations ............................................................................................................ 36
5.4 CLI online help ................................................................................................................................. 36
6 Simple Network Mangament Protocol (SNMP)....................................................................................... 37
6.1 Basic SNMP setting .......................................................................................................................... 37
6.2 MIB .................................................................................................................................................. 38
6.3 Traps ................................................................................................................................................ 38
6.4 Altering device configuration using SNMP ...................................................................................... 38
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 4 of 39 Version 1.0
1SPU Description.
1.1 Service connectors
SFP1
SFP2
LAN1
LAN2+POE
DC-IN
QSE (IQ) connector
USB MNG
Jumpers
USB
Storage
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 5 of 39 Version 1.0
Connector
Description
SFP1
1x 1000BaseSX/Lx (SFP);primary SFP port for user traffic connection.
SFP2
1x 1000BaseSX/Lx (SFP);secondary SFP port for user traffic connection.
LAN1
1x 100/1000BaseT (RJ45); primary LAN port for user traffic connection. The
priority based on ETH channel can be set in GUI or from the command line.
LAN2+POE
1x 100/1000BaseT (RJ45);
secondary LAN port for user traffic connection. This port is also dedicated for
MNG through internal switch for separate IP access to AOU unit.
A T the same time this port could be used for powering up of AOU unit over
POE according to the standard LTPoE++ 90W.
All of 8 pins on the connector must be used.
(pins 1,2,7,8 –one polarity; pins 3,6,4,5 –the opposite polarity) Pin polarity
can NOT be mixed.
The priority based on ETH channel can be set in GUI or from the command
line.
DC-IN
-48VDC;
separate power supply connector.
QSE (IQ) connector
QSE connector for connecting SPU to RF part. For the QSE connector pinout
see the specification in section SPU-RFU interconnection.
USB MNG (DEVICE)
MINI USB interface for an alternative IP access.
Pin configuration according to the standard MINI USB.
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 6 of 39 Version 1.0
USB Storage (HOST)
USB interface for connecting USB memory. It is meant for licenses backup and
upload. Further it could be used for logs saving etc.
The connection to USB port is via reduction cable. For pin configuration see a
diagram below.
FD Jumpers
Factory default jumper –by means of these two pins it is possible to reset the
device to factory-default settings.
Follow these steps - turn off the device and put a jumper to position FD. Then
turn on the device for about 15 seconds. Turn off the device again and re-
move the jumper and then turn the device back on. The device will reboot
with the factory-default settings.
Attention! If this process is performed with jumper a T position RST, the com-
plete device firmware is erased and the device is necessary to send back to
producer.
RST Jumpers
Configuration jumper reserved for producer only!!
RB Jumpers
Configuration jumper reserved for producer only!!
1
2
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 7 of 39 Version 1.0
1.2 Status LEDs
1.3 Interface LED
LED
State
Status
SFP1 Link
Off
No Ethernet Link
On
Ethernet Link established
Random Flashing
Ethernet activity
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 8 of 39 Version 1.0
SFP2 Link
Off
No Ethernet Link
On
Ethernet Link established
Random Flashing
Ethernet activity
LAN1 Link
Off
No Ethernet Link
On
Ethernet Link established
Random Flashing
Ethernet activity
LAN2 Link
Off
No Ethernet Link
On
Ethernet Link established
Random Flashing
Ethernet activity
SPU Status 1 - LED indicators
LED
State
Status
SPU status
Orange/Green
On or Flashing
LED indicators about the status of the device
and its parts during the turn on process and
while in operation.
SPU status
- during the device turn
on process
1)
Orange On
Power supply OK
2)
Green/Orange
Flashing
FPGA boot from CPU
SPU status
- while in operation
Green On
Device in OK status (no alarms-warnings)
Orange Flashing 1x
per 2 seconds.
Status warning –a T least 1 warning is indicated
Orange Flashing 2x
(double-flash) per 2
seconds.
Status error –a T least 1 error is indicated
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 9 of 39 Version 1.0
SPU Status 2 –LED indicators
LED
State
Status
PWROK
On
Indication, that power supply (DC-IN or POE)
runs fine and in the right order.
FLED0
Off
FPGA debugging LED, there is no allocated
function yet.
FLED1
Off
FPGA debugging LED, there is no allocated
function yet.
FLED2
Off
FPGA debugging LED, there is no allocated
function yet.
RUN
Flashing
Indication of correct CPU run. Update loop.
BL
Off
CPU indication, there is no allocated function
yet.
www.hypercable.fr www.e-rake.fr
Full Outdoor 2+0 XPIC IP Link
Page 10 of 39 Version 1.0
1.4 Power supply
The device could be powered up in two different ways. This could be either over POE (port LAN2-
POE), or through isolated power supply over separate power supply connector DC-IN.
2Management Introduction
2.1 Management access
By default is the local SPU unit’s management access bounded to the LAN2 ETH+POE port further refer-
enced by the unit’s SW perspective as LAN2. In order to connect to the unit for the first time you have to
setup your PC’s network interface (NIC) IP address into the subnet corresponding to the unit’s default IP
address range and interconnect both PC and the unit by an appropriate Ethernet cable.
Example
Assuming that the unit has the default secondary IP address of 10.10.10.10/24 you will have to setup the
managing computer’s IP address in the network 10.10.10.0 with net-mask 255.255.255.0 (/24 in UNIX no-
tion). Note that the computer’s IP address must not be the same as the device’s IP address. In this case val-
id IP addresses are within range from 10.10.10.1 to 10.10.10.254, except for 10.10.10.10.
Available access methods
Method
Port number
Example
WEB GUI interface
80 (http),
443 (https)
In your WEB browser enter address “https://10.10.10.10/”
where the IP part corresponds to the unit’s IP address
Secure Shell (ssh)
22
In your ssh/Telnet/SNMP client application enter the unit’s IP
address, credentials and confirm possible security notifications.
Note that the SNMP access is not enabled by default so this op-
tion is not suitable for the initial connection.
Telnet
23
SNMP
161
Please note that connecting to the http protocol (port 80) will result in automatic browser redirection to
the secured https protocol (port 443).
The whole process of initial connection
1. Setup your computer’s network adapter IP address according to the unit’s default IP
2. Interconnect the unit’s management port and PC by an Ethernet cable
3. Power up the unit if not already
4. Connect to the unit from your computer by one of the available methods
For the default IP addresses and credentials please refer to the section Connection and Login.
www.hypercable.fr www.e-rake.fr
Tabla de contenidos
