HYDAC FILTER SYSTEMS FAM 5 Manual de usuario

FAM 5

LOGO! Replace / adjust the control

and display

Operating Instruction

English (translation of original instructions)

Document No. : 4639760

Follow these instructions for proper and safe use.

Keep for future reference.

Imprint

Manufacturer / publisher and responsible for the content:

Address of the manufacturer:

HYDAC FILTER SYSTEMS GMBH

Industriegebiet

66280 Sulzbach / Saar

Germany

Contact address:

HYDAC FILTER SYSTEMS GMBH

Justus-von-Liebig-Str., Werk 20

66280 Sulzbach / Saar

Germany

Telephone: +49 6897 509 01

Fax: +49 6897 509 9046

E-mail: [email protected]

Homepage: www.hydac.com

Court of Registration: Saarbrücken, HRB 17216

Executive directors: Mathias Dieter, Dipl.Kfm. Wolfgang Haering

Documentation Representative

The contact data of the Documentation Representative is:

Günter Harge

c/o HYDAC International GmbH, Industriegebiet, 66280 Sulzbach / Saar

Germany

Telephone: +49 6897 509 1511

Fax: +49 6897 509 1394

E-mail: [email protected]

Print date: 2/3/2022

Subject to technical modifications.

HYDAC FILTER SYSTEMS GMBH Table of Contents

BA FAM5 replace adjust the control and display 4639760 en-us web iii

Table of Contents

1 General .................................................................................................................... 4

1.1 Target group of the manual ............................................................................4

1.2 Illustrations in the manual...............................................................................5

1.2.1 Illustration on the title page ................................................................5

1.2.2 Representation of requirements.........................................................6

1.2.3 Representation of procedural instructions .........................................6

1.2.4 Representation of intermediate results/results...................................7

1.2.5 Supplementary symbols.....................................................................8

1.2.6 Representation of warning / general safety information.....................8

1.2.7 Signal words and their meaning in the general safety information ....9

1.3 Exclusion of liability / warranty .....................................................................10

1.4 Notes on copyright .......................................................................................10

2 Product- Performance description.......................................................................... 11

2.1 Checking the scope of delivery ....................................................................11

3 Copying the program.............................................................................................. 12

4 LOGO! Changing the PLC and display .................................................................. 13

5 Inserting the SD card ............................................................................................. 15

6 Setting the configuration ........................................................................................ 17

Index ...................................................................................................................... 19

1 | General HYDAC FILTER SYSTEMS GMBH

4 / 20 BA FAM5 replace adjust the control and display 4639760 en-us web

1 General

Before you use this product for the first time, read this manual

at least up to the chapter "Operation". If you would like to carry

out maintenance or troubleshooting, you can find the proce-

dure in the respective chapters.

The use and the handling of the product as well as its use are

not self-explanatory and are described in detail in this manual.

This manual will help you to use the product as intended, prop-

erly, effectively, and safely. Please refer to it every time you re-

quire specific details or actions.

Validity of this manual

The diagrams and visualizations in this manual are meant for

general illustration purposes. Therefore, representations and

functional options can deviate from the delivered product.

We reserve the right to modifications to the contents of this

manual without prior notice.

1.1 Target group of the manual

This manual was created for the following target group:

Target group Tasks

Owner Keep this manual and the applicable doc-

uments at the installation location of the

product and also for later use.

Ask the employees to read and follow the

manual and the associated documents, in

particular, the safety and warning instruc-

tions.

Additionally, please observe the product-

related instructions and requirements.

Operator, specialist

personnel:

Read, observe and follow this manual and

the associated documents, in particular,

the safety and warning instructions.

Tab.1: Target group

HYDAC FILTER SYSTEMS GMBH General | 1

BA FAM5 replace adjust the control and display 4639760 en-us web 5 / 20

1.2 Illustrations in the manual

You will find illustrations in this manual. You can find details re-

garding these in the following chapters.

1.2.1 Illustration on the title page

You will find the following information on the title page of this

manual:

Short name of the product

Product name

Operating and Maintenance Instructions

Document no.: 12345678

English (translation of original instructions)

Valid from:

- from s/no.

- ... ...

Fig.1:

Overview / labeling of the title page

1 Short name of the product / product name

2 Type of document

3 Language

4 Document no. / Index

5 Supplementary instructions regarding the validity of the

manual (optional)

Please note that you can directly access information through

the directories. However, this does not release you from the

obligation to read this manual fully before commissioning.

1 | General HYDAC FILTER SYSTEMS GMBH

6 / 20 BA FAM5 replace adjust the control and display 4639760 en-us web

The document no. with the index (4) is meant for identifying

and reordering the manual. The index is incremented every

time the manual is revised or changed.

The manual contains a table of contents, a list of tables and

figures, an index and a glossary.

1.2.2 Representation of requirements

These are absolutely required for carrying out a work activity

on the product and are marked with a check mark and are in

bold in the text.

An example for the representation of requirements:

ühe product is assembled and connected.

üThe product is switched off.

1. Switch the product on.

1.2.3 Representation of procedural instructions

In the case of procedural instructions, there are the two follow-

ing representations:

Procedural instructions with a fixed sequence

Procedural instructions, whose sequence must be complied

with without fail are listed with sequential numbering (1., 2., 3.,

etc.).

An example for procedural instructions with a fixed sequence:

1. Remove the transport securing device.

2. First fill the product.

3. Switch the product on.

Procedural instructions with a random sequence

Procedural instructions that have a random sequence are

listed as bullet points (-).

An example of a procedural instruction with a random se-

quence:

– Clean the display.

HYDAC FILTER SYSTEMS GMBH General | 1

BA FAM5 replace adjust the control and display 4639760 en-us web 7 / 20

– Rinse the product.

1.2.4 Representation of intermediate results/results

In the case of some activities, it is necessary to carry out work

steps with intermediate results and end results.

Intermediate results are the consequence of activities; they are

marked with an indented arrow.

End results represent the end of an activity and are repre-

sented with a flag.

An example for a procedural instruction with intermediate re-

sult and final result:

1. Switch the product on.

ðThe display lights up.

2. Press the button.

OThe product is now ready for use.

1 | General HYDAC FILTER SYSTEMS GMBH

8 / 20 BA FAM5 replace adjust the control and display 4639760 en-us web

1.2.5 Supplementary symbols

You will find the following symbols in the manual as additional

details:

[ ]

u##

Cross reference to a page / a chapter / a section or

another document.

Glossary

Terms in grey are explained in detail in the glos-

sary, a chapter at the end of the manual.

Tip for handling the product.

Required tool.

1.2.6 Representation of warning / general safety

information

All the warning / general safety information in this manual are

highlighted with pictograms and signal words. The pictogram

and the signal word give you information of the risk level of the

danger.

Warning/General Safety Information, which is placed ahead of

each activity, are represented as follows:

CAUTION

Type and source of danger

Hazard symbol

Consequence of the danger

Measures to avert danger

►

HYDAC FILTER SYSTEMS GMBH General | 1

BA FAM5 replace adjust the control and display 4639760 en-us web 9 / 20

1.2.7 Signal words and their meaning in the general

safety information

In these instructions you will find the following signal words:

DANGER

DANGER – The signal word indicates a hazardous situation

with a high level of risk, which, if not avoided, will result lethal

or serious injury.

WARNING

WARNING – The signal word indicates a hazardous situation

with a medium level of risk, which, if not avoided, can result

lethal or serious injury.

CAUTION

CAUTION – The signal word indicates a hazardous situation

with a low level of risk, which, if not avoided, can result in mi-

nor or moderate injury.

NOTICE

NOTICE – The signal word indicates a hazardous situation

with a high level of risk, which, if not avoided, will result in

damage to property.

ENVIRONMENTALLY TIP

ENVIRONMENTALLY TIP – The signal word indicates a haz-

ardous situation without a high level of risk, which, if not

avoided, will result in environmental contamination.

1 | General HYDAC FILTER SYSTEMS GMBH

10 / 20 BA FAM5 replace adjust the control and display 4639760 en-us web

1.3 Exclusion of liability / warranty

For the warranty provided by us, please refer to our terms of

delivery. They are made available to you at the conclusion of

the contract at the latest. In addition, you will find these under

www.hydac.com -> General terms and conditions .

This manual was prepared to the best of our knowledge. Nev-

ertheless and despite the greatest care, it is possible that it

may contain errors. Therefore please understand that, in the

absence of any provisions to the contrary hereinafter, our war-

ranty and liability – for any legal reasons whatsoever – are ex-

cluded in respect of the information in these instructions. In

particular, we shall not be liable for lost profit or other financial

loss.

This exclusion of liability does not apply in cases of intent and

gross negligence. Moreover, it does not apply to defects which

have been deceitfully concealed or whose absence has been

guaranteed, nor in cases of culpable harm to life, physical in-

jury and damage to health. If we negligently breach any mate-

rial contractual obligation, our liability shall be limited to fore-

seeable damage. Claims due to the product liability shall re-

main unaffected.

1.4 Notes on copyright

All copyrights for this manual lie with the manufacturer. No part

of this manual may be reproduced using electronic systems in

any form without the written consent of the manufacturer. Any

infringements to the above shall be liable to damage compen-

sation.

Tabla de contenidos

Otros manuales de Sistema de filtración de agua de HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MFU-10P9S Series Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OLFP-3 Series Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MFU-15E Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MFU-15E Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OLFP-6 /X-G/-T001 Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OLFCM 15 Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MFU-10P9S Series Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MRF 3 Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OF7 Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OLFCM 5/15 Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MRF1 Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS FluidAqua Mobil FAM 10 Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MRFD2N Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OLF-5 Series Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MRF4 Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OLF-5-TAK Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS FluidAqua Mobil FAM 15 ATEX Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OF5 S Series Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OFU Filtromat Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS MRF D3 Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS OLF-5/Z Manual de usuario

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS TCU Series Manual

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS FluidAqua Mobil FAM 15 ATEX Hoja de instrucciones

HYDAC FILTER SYSTEMS

HYDAC FILTER SYSTEMS FCC Manual

Manuales populares de Sistema de filtración de agua de otras marcas

Wisy

Wisy LineAir 100 Manual de usuario

Schaffner

Schaffner Ecosine FN3446 Series Manual de funcionamiento

Pentair

Pentair FLECK 4600 SXT Guía del usuario

H2O International

H2O International H20-500 Manual de usuario

Renkforce

Renkforce 2306241 Manual de usuario

Neo-Pure

Neo-Pure TL3-A502 Manual de usuario

FLTR

FLTR OBF Manual de usuario

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Manual de usuario

Applied Membranes

Applied Membranes W-G844EM Manual de usuario

BEGA

BEGA 116 Manual de usuario

WATA

WATA Standard Manual de usuario

Price

Price FFU series Manual

Gaggenau

Gaggenau BRITA INTENZA 467873 Manual de usuario

Brita

Brita SAFF-100 Manual de usuario

HEISSNER

HEISSNER FPU24000-00 Manual de usuario

BGS technic

BGS technic 1518 Manual de usuario

Reverse Osmosis

Reverse Osmosis RF Series Manual de usuario

ubbink

ubbink Filtramax Series Manual de usuario